Production of Lectins from Marine Algae: Current Status,Challenges, and Opportunities for Non-Destructive Extraction

Marine algae are an excellent source of novel lectins. The isolation of lectins from marine algae expands the diversity in structure and carbohydrate specificities of lectins isolated from other sources. Marine algal lectins have been reported to have antiviral, antitumor, and antibacterial activity. Lectins are typically isolated from marine algae by grinding the algal tissue with liquid nitrogen and extracting with buffer and alcohol. While this method produces higher yields, it may not be sustainable for large-scale production, because a large amount of biomass is required to produce a minute amount of compound, and a significant amount of waste is generated during the extraction process. Therefore, non-destructive extraction using algal culture water could be used to ensure a continuous supply of lectins without exclusively disrupting the marine algae. This review discusses the traditional and recent advancements in algal lectin extraction methods over the last decade, as well as the steps required for large-scale production. The challenges and prospects of various extraction methods (destructive and non-destructive) are also discussed.     

The use of a real-time PCR primer/probe set to observe infectivity of Yersinia ruckeri in Chinook salmon, Oncorhynchus tshawytscha (Walbaum), and steelhead trout, Oncorhynchus mykiss (Walbaum)

Yersinia ruckeri is the causative agent of enteric redmouth disease (ERM), a common pathogen affecting aquaculture facilities and implicated in large losses of cultured fish. Fisheries scientists continue to gain a greater understanding of the disease and the pathogen by investigating methods of identification and pre- and post-infection treatment. In this study, a real-time PCR probe set for Y. ruckeri was developed to detect daily changes in the bacterial load during pathogen challenges. Two species of fish, Chinook salmon, Oncorhynchus tshawytscha, and steelhead trout, Oncorhynchus mykiss, were exposed to two strains of Y. ruckeri (Hag and SC) during bath challenges. A subset of fish was killed daily for 14 days, and the kidney tissue was biopsied to enumerate copies of pathogen DNA per gram of tissue. While Chinook exposed to either the Hag or SC strains exhibited similar pathogen loads, those exposed to the Hag strain displayed higher mortality (～66%) than fish exposed to the SC strain (～24% mortality). Steelhead exposed to the Hag strain exhibited a greater pathogen load and higher mortality (～42%) than those exposed to the SC strain (<1% mortality). Steelhead challenged with either strain showed lower pathogen loads than Chinook. The study illustrates the efficacy of the probe set to enumerate Y. ruckeri bacterial growth in the kidneys of fish. Also, strains of Y. ruckeri display species-specific growth patterns that result in differential mortality and pathogen load.     

Influence of light intensity on biofilm formation and the performance of pink shrimp Farfantepenaeus paulensis juveniles reared in cages

A reduction in light intensity may increase shrimp activity, although it may also negatively affect the development of photoautotrophic organisms present in biofilm, an important natural food source for shrimp. This experiment evaluated the influence of light intensity on biofilm development and on the growth of cultured Farfantepenaeus paulensis juveniles. Six cages were deployed in a shrimp culture pond and stocked with 60 juveniles (0.72 ± 0.03 g). Three cages were randomly chosen and covered with five layers of polyamide net to reduce light incidence (shaded treatment), while the other three cages were not covered (control treatment). Biofilm chlorophyll a and microorganism abundance, as well as shrimp growth, were monitored during the experiment. Chlorophyll a concentration and the abundance of bacteria and flagellates were significantly lower in the shaded treatment (P<0.05). After 75 rearing days, shrimp stocked in control treatment achieved significantly higher (5.98 g) (P<0.05) mean weight than shrimp reared in shaded treatment cages (5.13 g). Similarly, the biomass produced was also significantly higher (P<0.05) in the control treatment (322.92 g) than in the shaded treatment (287.31 g). The results of this study demonstrate that light intensity has a huge influence on shrimp performance mainly due to the increase in natural food availability.     

Isolation and characterisation of biologically-active compounds from some plant extracts

Of the numerous fractions obtained from the crude plant extracts of Chenopodium ambrosioides, Conyza dioscordisis and Convolvulus arvensis, 11 were found to be active against stored grain pests. The chemical structures of compounds present in the 11 fractions were found by gas chromatography/mass spectrometry to include predominantly long-chain fatty acid esters of hexadecanoic, arachidonic, and octadecanoic acids.     

The lipid compositions of two isolates of Cladosporium cucumerinum do not explain their differences in sensitivity to fungicides which inhibit sterol biosynthesis

Isolate 840905 of Cladosporium cucumerinum, when grown on agar or in liqiud medium, was sensitive to triadimenol, HWG 1608 (tebuconazole), fenpropimorph and pimaricin but relatively resistant to terbinafine. Conversely, isolate 49628 was sensitive to terbinafine but relatively resistant to the other fungicides. Changes in sterol composition following treatment with the fungicides reflected the known modes of action of each fungicide. When individual enantiomers of triadimenol were tested against isolate 840905 the order of activity in reducing mycelial growth was 1 S, 2R > 1R, 2R > 1R, 2S ≈? 1S, 2S, and this was paralleled by the depletion of ergosterol and the appearance of 14α-methyl sterols. Isolate 49628 had a greater saturated:unsaturated fatty acid ratio than did isolate 840905 but no major changes in fatty acid composition of either isolate were induced by fungicide treatment. There appears to be no obvious explanation for the differences in fungicide sensitivity of the isolates in terms of their lipid compositions.     

Some fluorine-containing pheromone analogues

Two analogues of the aphid alarm pheromone (E)-β-farnesene, a trifluorofarnesene and a difluoro-1-norfarnesene, were found to be highly active and were more readily detectable than the parent compound. For (Z)-hexadec-11-enal, a component of some lepidopteran sex attractant pheromones, replacement of the carbonyl oxygen with a difluoromethyl group to give a difluoroheptadecadiene resulted in loss of activity. A trifluoroacetoxyhexadecanolide was a more volatile analogue of the mosquito oviposition pheromone (?)-(5R,6S)-6-acetoxy-5-hexadecanolide and was highly active.     

Predicting percentage of intramuscular fat using two types of real-time ultrasound equipment

In the present study, 500 steers were used to develop models for predicting the percentage of intramuscular fat (PIMF) in live beef cattle. Before slaughter, steers were scanned across the 11th and 13th ribs using Aloka 500V (AL-500) and Classic Scanner 200 (CS-200) machines. Four to five images were collected per individual steer using each machine. After slaughter, a cross-sectional slice of the longissimus muscle from the 12th rib facing was used for chemical extraction to determine actual carcass percentage of intramuscular fat (CPIMF). Texture analysis software was used by two interpreters to select a region for determination of image parameters, which included Fourier, gradient, histogram, and co-occurrence parameters. Four prediction models were developed separately for each of AL-500 and CS-200 based on images captured by the respective machines. These included models developed without transformation of CPIMF (Model I), models based on logarithmic transformation of CPIMF (Model II), ridge regression procedure (Model III), and principal component regression procedure (Model IV). Model R2 and root mean square error of AL-500 Models I, II, III, and IV were 0.72, 0.84%; 0.72, 0.85%; 0.69, 0.91%; and 0.71, 0.86%; respectively. The corresponding R2 and root mean square error values of CS-200 Models I, II, III, and IV were 0.68, 0.87%; 0.70, 0.85%; 0.64, 0.94%; and 0.65, 0.91%; respectively. Initially, AL-500 and CS-200 prediction models were validated separately on an independent data set from 71 feedlot steers. The overall mean bias, standard error of prediction, and rank correlation coefficient across the four AL-500 models were 0.42%, 0.84%, and 0.88, respectively. For the four CS-200 models, the corresponding overall mean values were 0.67%, 0.81%, and 0.91, respectively. In a second validation test, only Model II of AL-500 and CS-200 was evaluated separately based on data from 24 feedlot steers. The overall mean bias, absolute difference, and standard error of prediction of AL-500 Model II were 0.71, 0.92, and 0.98%. For CS-200 Model II, the corresponding values were 0.59, 0.97, and 1.03%. Both AL-500 and CS-200 equipment can be used to accurately predict PIMF in live cattle. Further improvement in the accuracy of prediction equations could be achieved through increasing the development data set and the variation in PIMF of cattle used.