Morphological and hydraulic properties of a silt loam soil in New Zealand as affected by cropping history

Abstract. A rotation trial of four years' pasture followed by two years' arable was used to study the effect of cropping on the morphological and hydraulic properties of soil. An adjacent paddock in grass for the past 35 years was included as a permanent pasture reference. Initial infiltration and field saturated hydraulic conductivity ( K _fs) were least for cultivated soil and increased with increasing time under pasture. This could be explained by the contrasting porosities of resin-impregnated blocks of undisturbed soil which had been infiltrated with methylene blue dye. Small K _fs values for cultivated soil resulted mainly from a thin surface crust, although pore discontinuity at the depth of the cultivation pan (130 mm) could also have contributed. Greater K _fs values under short-term pasture resulted primarily from water flowing through biogenic pores connected to the surface. The greatest K _fs values were in soil that had been under pasture for 35 years (P35). This was attributed to flow through biogenic pores and fissures associated with the strongly-developed subangular blocky structure. The amount of water that infiltrated the two- and four-year pasture soils (P2 and P4) under ponding was 2.5 and 5 times greater, respectively, than the soil that had been cultivated for two years (C2).
As irrigation duration cannot be varied under the border-dyking system used on the Canterbury Plains, the interval between irrigations must be varied if the same total amount of water is to be applied to each of these soils through the season. The interval should be less for the cultivated soil than for those under pasture, and should increase with increasing time under pasture (i.e. P35 > P4 > P2 > C2).     

The lesions of toe tip necrosis in southern Alberta feedlot cattle provide insight into the pathogenesis of the disease

Gross and histologic postmortem studies were performed on the hind feet of feedlot cattle that had, or were free from, lesions of toe tip necrosis. The hind feet of feedlot cattle were collected by 3 veterinary feedlot practices in southern Alberta, Canada. Three studies of these feet were conducted: i) prediction of disease based on the presence or absence of apical white line separation, ii) gross assessment of the distribution and severity of lesions within affected claws, and iii) microscopic evaluation of the distal phalanx and surrounding soft tissues of affected claws. Prediction of toe tip necrosis based on the presence of apical white line separation was statistically significant (P < 0.0001). This, combined with a pattern of lesions indicative of an ascending infection of the distal phalanx and the absence of other lesions, suggests that the pathogenesis involves bacterial infection originating from the most distal aspect of the toe, at the apical white line.     

THE ROLE OF WILD ANIMALS IN THE SPREAD OF EXOTIC DISEASES IN AUSTRALIA

The distributions of the following feral animals are given -- cattle, buffalo, pig, goat, deer, camel, horse, donkey, fox, dog and cat -- and the native dingo. The possible role these and the native rodents, marsupials and monotremes would play should an exotic disease of livestock enter Australia is discussed. It is considered that feral animals would be important in creating foci from which the disease would spread.     

Identification of quantitative trait loci (QTLs) associated with maintenance of wheat (Triticum aestivum Desf.) quality characteristics under heat stress conditions

The goal of this study was to identify quantitative trait loci (QTLs) associated with the maintenance of wheat grain quality following post-anthesis heat stress in a recombinant inbred line (RIL) population. The response to heat stress was measured using the sodium dodecyl sulfate sedimentation test (SDSS), a significant predictor of bread baking quality. SDSS scores were used to identify QTLs associated with grain quality and QTLs associated with quality stability were identified based on percent change in SDSS score between the heat stress and control treatments. Four QTLs were identified, located one each on linkage groups 1B, 1D, 4A, and 7A. The 1B, 1D, and 4A QTLs were associated with grain quality; the QTL on linkage group 7A was associated with quality stability. To confirm the detected QTLs, eighty advanced lines grown at three Texas nurseries were tested for relationships between allelic polymorphism at QTL linked markers and quality traits. Quality trait stability in the advanced lines was estimated using the coefficient of variability (CV%) of quality traits between nurseries. The analysis supported the relationship of the predicted QTLs on linkage groups 1B, 1D, and 4A with quality traits. The confirmed QTLs may be used in marker assisted selection (MAS) to develop wheat lines possessing superior quality traits. In addition, identification of genetic regions associated with this trait will aid the identification of the underlying genes.     

Genetic Variation for Maize Epicuticular Wax Response to Drought Stress at Flowering

Drought stress is thought to promote epicuticular wax accumulation on maize leaves, which reduces plant water loss. We evaluated 62 maize inbred lines and their hybrid testcross progeny for epicuticular wax accumulation on flag leaves at flowering under full and limited irrigation regimes. Extracted wax was measured as a percentage of wax weight to leaf weight (WLW) and leaf area (WLA). Eleven genotypes had above average WLW as both inbred lines and hybrid testcrosses. Thirteen genotypes had above average WLA as either inbred lines or hybrid testcrosses. The drought treatment did not significantly alter WLW or WLA. Heritability of WLW was 0.17 (inbred lines) and 0.58 (hybrid testcrosses). Heritability of WLA was 0.41 (inbred lines) and 0.59 (hybrid testcrosses), suggesting it is a better trait than WLW for epicuticular wax screening. Correlations (r) between inbred lines and their testcross progeny were 0.44 and 0.18, for WLW and WLA, respectively. Heritability of grain weight per ear and plot yield was highest in hybrid testcrosses, with no correlation between inbred and hybrid germplasm. It is not warranted to evaluate epicuticular wax accumulation as the sole drought tolerance mechanism. However, it may be a good secondary trait to observe in relation to grain yield production in hybrids tested under water‐limiting conditions.     

Diameter and death of whorl and interwhorl branches in Atlas cedar (<Emphasis Type="Italic">Cedrus atlantica</Emphasis> Manetti): a model accounting for acrotony

• Introduction   

Branch size and branch status (dead or alive) are important characteristics closely related to tree growth and wood quality. The aim of this study was to design models for the diameter and status of branches in Atlas cedar (Cedrus atlantica Manetti).     

Comparing silvopastoral systems and prospects in eight regions of the world

Silvopasture systems combine trees, forage, and livestock in a variety of different species and management regimes, depending on the biophysical, economic, cultural, and market factors in a region. We describe and compare actual farm practices and current research trials of silvopastoral systems in eight regions within seven countries of the world: Misiones and Corrientes provinces, Argentina; La Pampa province, Argentina; northwestern Minas Gerais, Brazil; the Aysén region of Patagonia, Chile; the North Island of New Zealand; the Southeast United States; Paraguay; and Uruguay. Some countries use native trees and existing forests; some use plantations, particularly of exotic species. Natural forest silvopasture systems generally add livestock in extensive systems, to capture the benefits of shade, forage, and income diversification without much added inputs. Plantation forest systems are more purposive and intensive, with more focus on joint production and profits, for small owners, large ranches, and timber companies. Trends suggest that more active management of both natural and planted silvopastoral systems will be required to enhance joint production of timber and livestock, achieve income diversification and reduce financial risk, make more profit, improve environmental benefits, and realize more resilience to adapt to climate change.     

Genetic loci linking improved heat tolerance in wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) to lower leaf and spike temperatures under controlled conditions

Heat stress adversely affects wheat production in many regions of the world and is particularly detrimental during reproductive development. The objective of this study was to identify novel quantitative trait loci (QTL) associated with improved heat tolerance in wheat (Triticum aestivum L.) and to confirm previous QTL results. To accomplish this, a recombinant inbred line (RIL) population was subjected to a three-day 38°C daytime heat stress treatment during early grain-filling. At maturity, a heat susceptibility index (HSI) was calculated from the reduction of three main spike yield components; kernel number, total kernel weight, and single kernel weight. The HSI, as well as temperature depression (TD) of the main spike and main flag leaf during heat stress were used as phenotypic measures of heat tolerance. QTL analysis identified 14 QTL for HSI, with individual QTL explaining from 4.5 to 19.3% of the phenotypic variance. Seven of these QTL co-localized for both TD and HSI. At all seven loci, the allele for a cooler flag leaf or spike temperature (up to 0.81°C) was associated with greater heat tolerance, indicated by a lower HSI. In a comparison to previous QTL results in a RIL population utilizing the same source of heat tolerance, seven genome regions for heat tolerance were consistently detected across populations. The genetic effect of combining three of these QTL, located on chromosomes 1B, 5A, and 6D, demonstrate the potential benefit of selecting for multiple heat tolerance alleles simultaneously. The genome regions identified in this study serve as potential target regions for fine-mapping and development of molecular markers for more rapid development of heat tolerant germplasm.     

Making Asian students,making students Asian: The racialisation of export education in Auckland,New Zealand

Abstract: In recent years, international education has become a source of considerable political, academic and media debate in New Zealand. This is nowhere more the case than with regards to Auckland, the New Zealand city that has hosted the greatest number of international students. This paper focuses on the media debates around international students in Auckland with particular emphasis on the representations of the largest group of international students, those who originate from countries within the North‐East Asian region. The media representations of these students have fixed a diverse group of individuals within a singular racial identity that is known by stereotypical economic, cultural and social characteristics. As a result, these representations have further problematised the interaction between international students and the host population in Auckland while simultaneously implicating a cohort of young New Zealand citizens and permanent residents who are of similar descent within the same discourses. This process of othering the Asian student, regardless of citizenship, has consequences not simply for the practice of exporting education in this city but also for the future of a multicultural Auckland and New Zealand.     

Yield, yield components and plant architecture in the F3 generation of common bean (Phaseolus vulgaris L.) derived from a cross between the determinate cultivar ‘Prelude’ and an indeterminate landrace

Growth trials were conducted outdoors in the UK to determine the yield, yield components and plant architectural differences between determinate and indeterminate Phaseolus vulgaris bean plants. F3 lines derived from crosses between ‘Prelude’, a determinate cultivar and ‘V8’, an indeterminate landrace, were grown together with the parents and ‘Carioca’, an indeterminate landrace from Brazil. Data were recorded on flowering date, number of nodes on main stem at flowering, plant height at maturity, number of pods/plant, number of seeds/pod, number of seeds/plant, 100-seed weight, seed mass/plant, percentages of diseased and healthy seeds/plant. Determinate F3 lines had significantly lower (P < 0.05) seed mass/plant, fewer pods/plant, fewer seeds/pod, fewer seeds/plant, lower harvest index, shorter stems, earlier date of flowering, fewer nodes at flowering and fewer healthy seeds/plant than indeterminate F3 lines. However, determinate genotypes had significantly larger (P < 0.05) pods to accommodate their larger seeds compared with indeterminate lines. A similar situation was found when the yield and yield components of ‘V8’, ‘Prelude’ and ‘Carioca’ were evaluated; the highest seed mass/plant was given by ‘V8’ and the lowest by ‘Prelude’. Furthermore, some indeterminate genotypes with Type IV growth habit yielded significantly higher (P < 0.05) than the high-yielding parent, ‘V8’, indicating a positive influence on seed yield by crossing different genotypes.