Characterizing the setting of cement when mixed with cork, blue gum, or maritime pine, grown in Portugal II: X-ray diffraction and differential thermal analyzes

It is already known by the scientific and industrial communities that lignocellulosic substrates are, to a certain extent, inhibitors of the hydration reaction of cement. The extent to which and how they influence such reactions is still a matter of debate. Several techniques, such as calorimetry, i.e., the measurement of the heat evolved or obtaining temperature profiles during the hydration, the determination of extractive contents of lignocellulosic substrates and their relation with the characteristics of the hydration curves, or even testing of the mechanical properties of the wood-cement composites, have been used in previous research. This study complements past research using two techniques that have been used in the analysis of cement hydration but are not usually applied to lignocellulose-cement mixes, namely X-ray diffraction (XRD) and differential thermal analysis (DTA). The raw materials for this study were three lignocellulosic materials of Portuguese origin: cork (the bark of Quercus suber L.), blue gum (Eucalyptus globulus Labill.), and maritime pine (Pinus pinaster Ait); and Portland cement. The two techniques allowed tracking of the evolution of the main cement constituents during hydration. It was found that all the lignocellulosic substrates had detrimental effects on cement hydration. The blue gum exhibited the fastest hydration kinetics in the initial stage of reaction, but was then overtaken by cork, which at the end gave the highest hydration conversion amongst the three lignocellulosic substrates. Although pine caused the slowest initial hydration kinetics, with the passage of time its effect approached that of blue gum. At the end of the hydration period, specimens containing either species had similar quantities of hydration reaction products. The DTA and XRD results were consistent and are in good agreement with the temperature profiles and compatibility indexes reported in a previous work.     

Merchantable volume system for pedunculate oak in northwestern Spain

A model is required for accurate estimation of the merchantable volume of pedunculate oak (Quercus robur L.) trees in Galicia, northwestern Spain. Accordingly, the purpose of the present study was to obtain equations for predicting merchantable volumes and stem profiles of individual trees. For this reason, two compatible and four non-compatible volume systems were initially evaluated and fitted to data from 251 destructively sampled trees which were collected in stands located throughout the area of distribution of the species in Galicia. The outliers were removed to provide a data set of measurements from 3 090 sections, which was then available for fitting. A second-order continuous autoregressive error structure was used to account for autocorrelation. Comparison of the models was carried out using overall goodness-of-fit statistics and box plots of residuals against relative height or diameter class. The compatible volume system of Fang et al. [22] provided the best compromise in describing the stem profile and estimating merchantable height, merchantable volume and total volume and is therefore recommended for pedunculate oak stands in Galicia.     

Reduced ant diversity along a habitat regeneration gradient in the southern Brazilian Atlantic Forest

This study evaluates the response of the ant communities along a habitat regeneration gradient in the south Atlantic Forest comparing it with the ant fauna from a mature forest at the same biome. The survey was conducted according to standard collecting protocols, employing sardine baits and mini-Winkler apparatuses. The structure of the ground and litter-foraging ant community was compared in five habitats, representing a regeneration gradient within the Atlantic Forest. Furthermore, the composition of the leaf-litter ant fauna and the species richness were compared between the regeneration gradient and an area of mature forest. The results showed a higher number of leaf-litter ant species in the mature forest in comparison with the regeneration gradient habitat, as well a distinct species composition. There was a significant loss of ant diversity in the regrowth forest, compared to the mature Atlantic Forest. The composition of the ground-dwelling ant fauna does not consistently separate the sites of forest succession; but a gradient of ant species richness and composition was revealed when the leaf-litter ant fauna data set was included in the analysis. In this sense, the leaf-litter ant fauna is an important segment to characterize habitats also playing an important rule as bio-indicators. The data suggest that only primary forests (our data) and old secondary forests (in litt.) are capable of maintaining a substantial proportion of the biodiversity in areas of the Atlantic Forest.     

Growth and yield of coffee plants in agroforestry and monoculture systems in Minas Gerais, Brazil

This research compared coffee plants (Coffea arabica L.) grown in an agroforestry and monoculture systems. Data were collected during two years, on vegetative growth, reproductive development, nutritional status and yield of coffee, besides monitoring air temperature and the tree growth. All trees in agroforestry system increased in growth, resulting in a reduction in the magnitude of the diurnal temperature variation and also maximum temperature. Coffee plants in agroforestry system had less branch growth and leaf production, more persistent and larger leaves, and presented earlier flowering, with a smaller number of productive nodes and flower buds, leading to smaller berry yield than plants in monoculture system. In both systems, the coffee plants showed adequate leaf nutrient levels, except for P and K. The yield of 2443 kg ha^-1 of coffee from the monoculture was greater than 515 kg ha^-1 of coffee from the agroforestry system.     

Characteristics of sugar maple wood surfaces machined with the fixed-oblique knife pressure-bar cutting system

Oblique cutting differs from orthogonal cutting by an inclination given to the knife edge, which induces several changes on tool geometry, cutting forces, as well as on the quality of machined surfaces. In this work, a pressure bar was used during oblique cutting to reduce the occurrence of torn grain. The effects of cutting depth, rake angle, and oblique angle on cutting forces and surface quality were studied. Surface topography, cell damage and wetting properties were used to assess surface quality. All force components were increased by increasing cutting depth and decreasing rake and oblique angles. The lateral force, however, increased as the oblique angle increased. The surface roughness increased with increasing the lateral cutting force. Higher cutting depths and oblique angles tended to provide higher surface roughness, while higher rake angles tended to reduce surface roughness. The pressure bar was not always able to completely prevent the occurrence of defects when cutting against the grain. The occurrence of machining defects increased at higher cutting depths and oblique angles. As the rake angle decreased, the type of machining defect tended to change from torn grain to slight fuzzy grain. Moreover, the best wetting properties were obtained at lower rake angles, as they induced higher surface roughness. A 25° rake angle, a 30° oblique angle, and thinner cutting depths should be preferred to reduce dependence on ulterior sanding.     

Carcass characteristics and meat quality of lambs fed with cassava foliage hay and spineless cactus

The objective of this study was to evaluate the influence of the total or partial replacement of Tifton 85 hay (TH) by cassava foliage hay (CH) and/or spineless cactus (SC) on the carcass characteristics and meat quality of confined lambs. Thirty-five Dorper x Santa Inês crossbred lambs were used, with an initial average weight of 16.0 ± 1.9 kg, fed with five treatment diets: 70% TH, 70% CH, 35% TH + 35% CH, 35% TH + 35% SC, and 35% CH + 35% SC. After 90 days of confinement, the animals were slaughtered and the carcass and meat data were compared using the Tukey test at 5%. The partial replacement of TH by SC increased the cold carcass weight by 3.9 kg (p < .05). The proportion of fat (%) increased (p < .05) when TH was replaced by CH + SC. The intensity of red (a*) was lower (p < .05) in the meat of animals fed with CH or CH + SC. It is recommended to partially replace TH with SC, or to replace totally with CH in association with SC.     

Toxoplasma gondii infection in Colombia with a review of hosts and their ecogeographic distribution

Toxoplasma gondii is one of the most prevalent zoonotic protozoan parasites among warm‐blooded animal populations (humans included) around the world, causing multiple clinic manifestations including death in the most severe cases of infection. Due to the versatile life cycle of T. gondii and its diversity of potential hosts, there is a common perception that natural areas and wildlife are highly prevalent reservoirs for the parasite; however, information and reports of the parasite on wildlife populations in Colombia are scarce. Using PRC‐based detection analyses of the B1 gene, we evaluated the presence of T. gondii in 49 native small mammal species (10% of the mammal species of Colombia) from 4 different undisturbed natural habitats. Additionally, to understand the ecogeographical distribution of the parasite in Colombia, we developed a literature search of infection reports including information on the host species, density of records and occurrence patterns (using landcover and ecoregions) in natural, rural and urban areas. Our literature review showed a total of 8,103 reports of T. gondii for Colombia of which 86% were related to humans, and 14% to non‐human mammals and other categories, with just a single report associated to wildlife; additionally, 82% of all reports were associated to urban areas whereas only 18% to rural sites. Based on the negative results for the presence of T. gondii in our PCR‐based analyses and our literature search, we suggest that T. gondii has a synanthropic distribution in Colombia occurring in ecoregions as variable as the xeric scrubs in the northern lowlands and humid montane Andean forests, also we show a lack of information on the parasite relationship with wildlife, a concerning fact given that zoonoses are the leading mechanism for the emergence of infectious diseases.     

Monitoring water and NO3-N in irrigated maize fields in the Sorraia Watershed, Portugal

The Sorraia Watershed has a long history of continuous irrigated maize. Imprecise water and fertiliser management has contributed to increase nitrate in the groundwater. Solving this problem requires the identification of problem sources and the definition of alternate management practices. This can be performed by an interactive use of selective experimentation and modelling. This paper presents the experimentation phase, where the field experiments were conducted under the irrigation and fertilisation management commonly found in the watershed. Two different soil representatives of the watershed were selected, presenting different water and solute transport properties. One is a silty loam alluvial soil, with a shallow water table, and the other is a sandy soil with a very low water retention capacity. The various terms of the water (consumption, drainage, soil storage) and nitrogen balance (plant uptake, mineralisation and leaching) were obtained from intensive monitoring in the soil profile up to 80 cm, corresponding to the crop root zone. The results showed that in the alluvial soil, up to 70 kg N ha⁻¹ was produced by mineralisation. Current fertiliser management fail in that it does not consider the soil capability to supply mineral nitrogen from the organic nitrogen stored in the profile at planting. This leads to a considerable amount of NO₃-N stored in the soil at harvesting, which is leached during the winter rainy season. In the sandy soil, the poor irrigation management (45% losses by deep percolation), leads to NO₃-N leaching during the crop season and to inefficient nitrogen use by the crop.     

Genetic improvement of bread wheat (Triticum aestivum L.) in Argentina: relationships between nitrogen and dry matter

Summary Changes in nitrogen (N) economy and N to dry matter (DM) relationships were studied for six cultivars of bread wheat (Triticum aestivum L.) released in Argentina at different times between 1912 and 1980. Experiments were performed on two successive years.N partitioning to reproductive organs was changed both at anthesis and at maturity. Grain N yield (GNY) was associated to both total N accumulated and N partitioning. Most of the changes produced by genetic improvement on N economy at maturity could be explained by parallel changes at anthesis. Neither biological N yield (BNY) at anthesis nor BNY at maturity showed any trend with the year of release of the cultivars.Grain N concentration (GNC) showed a negative trend with the year of release, and was inversely correlated to both grain yield (GY) and harvest index (HI). However, GNC was positively and significantly associated with NHI to HI ratio, indicating that the main reason for its behaviour along this century was the dilution of N on non N compounds.The N utilization efficiencies (NUE) for both GY and grain number were positively affected by breeding. Moreover, modern Argentinian cultivars are as efficient as the best cultivars showed by other authors.It is suggested that to increase GNC together with GY, breeders should improve N accumulation at anthesis maintaining high remobilization of vegetative N.     

Genetic control of esterase-6 isozymes in hexaploid wheat and rye

Summary The EST-6 leaf esterase phenotypes from euploid, nullisomic-tetrasomic and rye chromosome addition and substitution lines of common wheat were determined using polyacrylamide gel electrophoresis. Evidence is presented to demonstrate that Est-6 is a new set of genes, that are expressed in the leaf. The Est-6 gene set were clearly distinguished from the Est-5 genes which are expressed in the grain. The three homoeoallelic loci, Est-A6, Est-B6 and Est-D6, were located on chromosomes 3A, 3B and 3D. An Est-R6 gene was located on chromosome 6R is involved in rye. Some considerations concerning homoeology between homoeologous group 3 of wheat and the rye chromosome 6R are made.