Stand density and growth of Norway spruce (<Emphasis Type="Italic">Picea abies</Emphasis> (L.) Karst.) and European beech (<Emphasis Type="Italic">Fagus sylvatica</Emphasis> L.): evidence from long-term experimental plots

On the basis of nine Norway spruce (Picea abies (L.) Karst.) and ten European beech (Fagus sylvatica L.) thinning experiments in Germany, for which both residual and removed stock had been registered first during 1870, I scrutinize how moderate and heavy thinning from below (B-, C-grade) affects the production of merchantable volume compared with light thinning (A-grade). In relation to A-grade, cumulative merchantable volume (CV) of B- and C-grade amounts in average to 103–107% in juvenile and to 97–102% in mature Norway spruce stands. The corresponding findings for European beech are 101–106% and 94–102%. CV of individual stands varies between 89% and 130% for Norway spruce and 73% and 155% for European beech (CV of A-grade = 100%). These findings are substantiated by the relation between stand density (SDI) and periodic annual increment (PAI). On the B- and C-grade plots of spruce and beech, respectively, SDI was reduced down to 41–91% and 31–83% of the A-grade. When SDI is reduced in young stands, PAI follows a unimodal curve. Norway spruce’s PAI culminates in 109% if SDI is reduced to 59%; European beech’s PAI culminates in 123% when density is reduced to 50%. Whereas Norway spruce’s growth reacts most positively on thinning under poor site conditions and with increment reduction on favourable sites, European beech behaves oppositely. With stand development the culmination point of the unimodal relation moves towards maximum density, so that in older stands PAI follows the increasing pattern, which is the left portion of a unimodal curve. A model is presented which apparently unifies contradictory patterns of stand density–growth reactions by integrating relative stand density, average tree size and site fertility effects, and makes the findings operable for forest management.     

Microclimate within beech stands—part II: thermal conditions

Within the framework of an interdisciplinary project on the effects of climate and forest management on beech-dominated deciduous forests (Swabian Jura, south-western Germany), forest meteorological investigations are carried out to analyse the influences of exposure and canopy density on the microclimate within various beech stands (Fagus sylvatica L.). This second paper of the series Microclimate within beech stands focuses on the thermal conditions that exist mainly in the near-surface layer at different test plots. They were analysed by air temperature, T_a, (at 1.5 m a.g.l) and soil temperature, T_s, at six depths measured continuously in the period 1999–2003. The main results can be summarized as follows. (1) The thermal situation within the beech stands described by T_a depended primarily on the turbulent air-mass exchange conditions which were based on the slope-specific energy balance of the forest floor and advective heat fluxes. (2) The thermal situation within the soil described by T_s at 3 and 20 cm depth was governed by the molecular heat transport. Therefore, the heating and cooling rates of T_s were always lower than for T_a. Higher T_a and T_s values for the test plots on the SW slope showed that the thermal conditions within the beech stands depended primarily on the exposure. (3) Based on slope-specific differences of daily extremes of T_a and T_s at 3 cm depth between the silviculturally treated and control plots, the influence of the more pronounced height growth of the understorey vegetation under the near-surface thermal conditions could be clearly verified for the NE slope.Abbreviations PAR Photosynthetically active radiation - PAI Plant area index - LAI Leaf area index     

Using model scenarios to predict and evaluate forest-management impacts on soil base saturation at landscape level

Silviculture, forest conversion and technical tools of ecosystem management, such as forest liming, display their effects at the landscape level. Therefore their planning and control should take place at the same scale. The primary objective of this work was to assess soil chemical properties and their changes in relationship to ecosystem management, especially forest conversion and forest liming. We calculated scenario models, based on regression analysis, which allow such an examination in the context of understanding landscape processes which can be expected to operate in the sampling region. Stepwise multiple linear regression analysis was used to predict soil chemical attributes (base saturation, pH, C/N content and stock, exchangeable stocks of Ca and Mg) as indicators of site stability or off-site effects of forest ecosystems such as effects on clean drinking water from forested watersheds. Because of space limitations, in this paper only the modelling results of base saturation are presented. Base saturation was used as an integrative example for other soil chemical properties. The transformation of measurements to the regional scale, i.e., the regionalization, was calculated for the forested parts of two test regions in the Black Forest on the basis of measured chemical properties of 90–150 soil profiles per test region. The models have a spatial resolution of 50×50 m, which is a spatial scale relevant for forestry practice and forest management. Topographic variables (e.g., elevation, aspect, slope gradient, and slope length), the stratigraphic classification of the geologic substrate, stand characteristics from forest inventory data, and finally technical information about forest liming were the auxiliary variables (secondary site properties) that provided indirect information about base saturation and were available for the whole forested area of the test regions. Base saturation could be predicted with an accuracy of ~50–70% (in terms of the multiple R²) by using these properties as predictor variables in multiple linear regression analyses. The explained proportion of variance was unexpectedly high considering the high geomorphological heterogeneity of the two test regions. Based upon the regionalization models, it was possible to establish scenarios showing the landscape-related effects on base saturation that may be achieved by forest conversion towards a higher proportion of forests with broad-leaved mixed stands and by forest liming. These scenarios allow the interactions between several influencing factors and management strategies and the impacts on the target variable to be synoptically judged. Thus the presented regionalization models achieve the role of decision support tools for the planning of forest management at the landscape level. They allow an assessment of the environmental effects of forest management strategies in terms of site sustainability or preservation of water resources in forested catchments.     

Wood modification with alkoxysilanes

Wood was treated with three different alkoxysilanes which are able to undergo a sol–gel process: tetraethoxysilane (TEOS), methyl triethoxysilane (MTES) and propyl triethoxysilane (PTEO). Two types of treatments were compared: impregnation of fibre saturated wood with monomeric silane solutions, and impregnation with pre-hydrolysed partly oligomeric silanes. Wood properties such as cell wall bulking, anti-swelling efficiency (ASE), moisture uptake and durability were more significantly improved in samples treated with monomeric silanes than in samples treated with oligomeric silanes. SEM-EDX mapping showed that this treatment resulted in a higher degree of silicon incorporation into the cell wall, although the weight percent gain (WPG) was lower compared to the treatment with pre-hydrolysed partly oligomeric silanes. The resistance against soil micro-organisms was enhanced in the initial phase of incubation especially in those samples treated with organo-functional-alkoxysilanes. In miniaturised block tests with the white-rot basidiomycete Trametes versicolor, an improved durability was observed within the test period. During an air conditioning step, a weight loss of the treated samples occurred which was accompanied by a reduction in bulking and ASE. The initial reduction of moisture uptake observed after treatment diminished almost completely. This effect was explained by an ageing of the gels in the wood cell wall which is a consequence of uncompleted hydrolysis and condensation of the silanes during the treatment.     

Spatial patterns in mixed coniferous even-aged,uneven-aged and conversion stands

Different methodological approaches from the field of spatial statistics, the index of cluster size (ICS) and quadrat methods such as the two-term and three-term local quadrat variance (TTLQV and 3TLQV) and the new local variance (NLV) were tested to find a simple spatial measure to classify mixed coniferous uneven-aged, even-aged and conversion stands in the central Black Forest area of Germany. Altogether six stands were analysed with regularly distributed sample plots of 0.25 ha (50×50 m), each subdivided into 25 quadrats of 10×10 m. In each of the quadrats, diameter at breast height (dbh) for trees of the overstory (dbh>7 cm) was assessed and classified into three diameter classes. Height measurements were used to develop specific stand height curves for each stand and to calculate the standing volume per tree and per quadrat. The even-aged stands showed a regular distribution of the standing volume, while the conversion and uneven-aged stands were more clustered. This was detected using ICS, which proved to be a simple but very efficient measure for stand structure. The ICS also showed a highly random distribution of small and medium trees and a regular distribution of large trees of the overstory in the uneven-aged stand. Large and medium trees of one even-aged stand were also regularly distributed while conversion stands showed a regular, random or slightly clustered distribution of these trees. The more uneven the ages in the stands were, the larger were the phases detected by the NLV. The findings of the ICS were generally supported by the TTLQV and 3TLQV. The more uneven the ages in a stand were, the less clustered were the trees of different sizes of the understory. Clustering also decreased with increasing height of understory trees. The patterns detected in the investigated stands were related to the effect of different management regimes. Implications for the management of conversions stands based on the findings of the study are given.     

Growth and nutrient accumulation of Brazil nut trees (Bertholletia excelsa) in agroforestry at different fertilizer levels

The Brazil nut tree(Bertholletia excelsa) is a frequent component of agroforestry systems in the Amazon because of its adaptation to nutrient-poor upland soils and multiple uses.We investigated the aboveground biomass production(kg dry weight),nutrient uptake and requirements(N,P,Ca,Mg,K) of Brazil nut trees of different sizes grown under agroforestry conditions and fertilized at different levels.Eight of 70 experimental trees with different size were harvested and stem,branches and leaves were separated.Nutrient contents were determined for three trees of varying size.Average tree growth was fast,but variability was high,suggesting considerable potential for the improvement of this economically important species.The trees responded to increased levels of fertilizer and lime with significantly increased foliar nutrient contents and growth,probably because of the improved availability of Mg and Ca for which the species seems to have a relatively high demand.In contrast to Brazil nut trees grown in forest or dense plantations,the agroforestry trees invested a substantial part of their biomass and nutrients in large branches and developed spreading crowns.To improve stem form,reduce competition with associated crops for light and recycle nutrients,regular pruning of lower branches or planting arrangements that favor self-pruning are recommended.These measures would also increase the recycling of Ca and Mg,large quantities of which are contained in the branches.     

A KCNJ10 mutation previously identified in the Russell group of terriers also occurs in Smooth-Haired Fox Terriers with hereditary ataxia and in related breeds

Background

Hereditary ataxias with similar phenotypes were reported in the Smooth-Haired Fox Terrier, the Jack Russell Terrier and the Parson Russell Terrier. However, segregation analyses showed differing inheritance modes in these breeds. Recently, molecular genetic studies on the Russell group of terriers found independent mutations in KCNJ10 and CAPN1, each associated with a specific clinical subtype of inherited ataxia. The aim of this study was to clarify whether or not Smooth-Haired Fox Terriers with hereditary ataxia and dogs of other related breeds harbor either of the same mutations. A sub goal was to update the results of KCNJ10 genotyping in Russell group terriers.

Findings

Three Smooth-Haired Fox Terriers with hereditary ataxia and two Toy Fox Terriers with a similar phenotype were all homozygous for the KCNJ10 mutation. The same mutation was also found in a heterozygous state in clinically unaffected Tenterfield Terriers (n = 5) and, in agreement with previous studies, in Jack Russell Terriers, Parson Russell Terriers, and Russell Terriers.

Conclusions

A KCNJ10 mutation, previously associated with an autosomal recessive spinocerebellar ataxia in Jack Russell Terriers, Parson Russell Terriers, and Russell Terriers segregates in at least three more breeds descended from British hunting terriers. Ataxic members of two of these breeds, the Smooth-Haired Fox Terrier and the Toy Fox Terrier, were homozygous for the mutation, strengthening the likelihood that this genetic defect is indeed the causative mutation for the disease known as “hereditary ataxia” in Fox Terriers and “spinocerebellar ataxia with myokymia, seizures or both” in the Russell group of terriers.