Contrasting rooting patterns of some arid-zone fruit tree species from Botswana – I. Fine root distribution

To assess the possible degree of root competition from fruit trees which could potentially be used in agroforestry systems, fine root density of fruit trees Strychnos cocculoides Bak., Strychnos spinosa Lam. (Loganiaceae) and Vangueria infausta Burch. (Rubiaceae), as well as from the shrubby species, Grewia flava DC. (Tiliaceae) was investigated. Vangueria infausta had the highest fine root densities in both vertical and horizontal extensions. In Vangueria infausta fine root density decreased with increasing soil depth. For the other species in the 80 cm soil profile investigated, no significant changes in fine root density with soil depth were found. For Strychnos cocculoides almost no fine roots were detected in the upper soil horizon (0–20 cm). Using fine root surface area densities, exploration and exploitation indices were calculated. Vangueria infausta had the highest value of the exploration index compared to the other species. For use in agroforestry systems Vangueria infausta was estimated to be the most competitive of the investigated species, whereas Strychnos cocculoides seems to be the less competitive. Strychnos cocculoides has additionally spatial arrangements of fine roots favourable for agroforestry, slowly increasing with depth and additionally low concentrations in upper soil layers.     

A set of primers for analyzing chloroplast DNA diversity in Citrus and related genera

Chloroplast simple sequence repeat (cpSSR) markers in Citrus were developed and used to analyze chloroplast diversity of Citrus and closely related genera. Fourteen cpSSR primer pairs from the chloroplast genomes of tobacco (Nicotiana tabacum L.) and Arabidopsis were found useful for analyzing the Citrus chloroplast genome (cpDNA) and recoded with the prefix SPCC (SSR Primers for Citrus Chloroplast). Eleven of the 14 primer pairs revealed some degree of polymorphism among 34 genotypes of Citrus, Fortunella, Poncirus and some of their hybrids, with polymorphism information content (PIC) values ranging from 0.057 to 0.732, and 18 haplotypes were identified. The cpSSR data were analyzed with NTSYS-pc software, and the genetic relationships suggested by the unweighted pair group method based on arithmetic means (UPGMA) dendrogram were congruent with previous taxonomic investigations: the results showed that all samples fell into seven major clusters, i.e., Citrus medica L., Poncirus, Fortunella, C. ichangensis Blanco, C. reticulata Swingle, C. aurantifolia (Christm.) Swingle and C. grandis (L.) Osbeck. The results of previous studies combined with our cpSSR analyses revealed that: (1) Calamondin (C. madurensis Swingle) is the result of hybridization between kumquat (Fortunella) and mandarin (C. reticulata), where kumquat acted as the female parent; (2) Ichang papeda (C. ichangensis) has a unique taxonomic status; and (3) although Bendiguangju mandarin (C. reticulata) and Satsuma mandarin (C. reticulata) are similar in fruit shape and leaf morphology, they have different maternal parents. Bendiguangju mandarin has the same cytoplasm as sweet orange (C. sinensis), whereas Satsuma mandarin has the cytoplasm of C. reticulata. Seventeen PCR products from SPCC1 and 21 from SPCC11 were cloned and sequenced. The results revealed that mononucleotide repeats as well as insertions and deletions of small segments of DNA were associated with SPCC1 polymorphism, whereas polymorphism generated by SPCC11 was essentially due to the variation in length of the mononucleotide repeats.     

A new alpha-methylene gamma-lactone sesquiterpene from Hedyosmum arborescens

A new sesquiterpene lactone, 7alpha,10alpha-epoxy-1alpha(H),5alpha(H)-guaia-3,11(13)-dien-8alpha,12-olide, was isolated from the leaves of Hedyosmum arborescens. The structure of this unusual 7,10-epoxy-guaianolide was determined by spectroscopic methods, particularly one- and two-dimensional 1H and 13C NMR.     

Annualized diameter and height growth equations for Pacific Northwest plantation-grown Douglas-fir, western hemlock, and red alder

Simulating the influence of intensive management and annual weather fluctuations on tree growth requires a shorter time step than currently employed by most regional growth models. High-quality data sets are available for several plantation species in the Pacific Northwest region of the United States, but the growth periods ranged from 2 to 12 years in length. Measurement periods of varying length complicate efforts to fit growth models because observed growth rates must be interpolated to a common length growth period or those growth periods longer or shorter than the desired model time step must be discarded. A variation of the iterative technique suggested by Cao [Cao, Q.V., 2000. Prediction of annual diameter growth and survival for individual trees from periodic measurements. Forest Sci. 46, 127–131] was applied to estimate annualized diameter and height growth equations for pure plantations of Douglas-fir, western hemlock, and red alder. Using this technique, fits were significantly improved for all three species by embedding a multi-level nonlinear mixed-effects framework (likelihood ratio test: p < 0.0001). The final models were consistent with expected biological behavior of diameter and height growth over tree, stand, and site variables. The random effects showed some correlation with key physiographic variables such as slope and aspect for Douglas-fir and red alder, but these relationships were not observed for western hemlock. Further, the random effects were more correlated with physiographic variables than actual climate or soils information. Long-term simulations (12–16 years) on an independent dataset using these annualized equations showed that the multi-level mixed effects models were more accurate and precise than those fitted without random effects as mean square error (MSE) was reduced by 13 and 21% for diameter and height growth prediction, respectively. The level of prediction error was also smaller than an existing similar growth model with a longer time step (ORGANON v8) as the annualized equations reduced MSE by 17 and 38% for diameter and height growth prediction, respectively. These models will prove to be quite useful for understanding the interaction of weather and silviculture in the Pacific Northwest and refining the precision of future growth model projections.     

马尾松人工林抚育间伐起始期的研究

通过对马尾松人工林试验地调查并选取标本木进行树干解析，分析马尾松人工林间伐合理起始期及不同起始期对林分生长影响，结果表明：初植密度高，间伐合理起始期提前，反之，间伐合理起始期推迟。超过间作合理起始期间伐会抑制林木生长。间伐合理起始期可以通过分析胸径加年生长量来确定。     

Effects of abrasive mineral, grit size and feed speed on the quality of sanded surfaces of sugar maple wood

Sanding is a common practice required in order to prepare wood surfaces for coating. Little literature is available regarding the effect of sanding parameters on the quality of surfaces. Sugar maple wood surfaces were evaluated in samples that had been sanded using two types of abrasive minerals, three grit sizes and four feed speeds. Roughness, wetting properties and cell damage were used to assess surface quality. Both abrasives decreased roughness and cell damage from 100- to 120-grit sanding stage. Addition of a 150-grit stage did not further reduce the roughness, whereas the cell damage continued to decrease. Increasing feed speed led to rougher surfaces due to higher fibrillation. Surfaces produced by silicon carbide were smoother and less damaged than those obtained with aluminum oxide. However, the surfaces sanded with aluminum oxide were more wettable and showed no significant difference in wetting time as a function of grit size. For these surfaces, the wetting time was reduced as feed speed increased.An erratum to this article is available at .An erratum to this article can be found at     

Vegetative propagation of Colutea istria Mill. from leafy stem cuttings

This study investigates the optimal conditions for the vegetative propagation of the multipurpose leguminous shrub Colutea istria from leafy stem cuttings. The conditions examined included 1) the origin of the cutting (apical, medial or basal), 2) indole-3-butyric acid (IBA) treatment (0, 50, 200 or 400 mg/l), 3) the relative humidity of the propagation environment (high or low), 4) wounding base of cutting, and 5) the season in which the cutting was taken. The rooting ability of the cuttings was significantly influenced by all these factors. Winter cuttings obtained from the middle and base of the branch showed a greater rooting capacity than those harvested from the apical area, while autumn cuttings harvested from the middle and apical areas of the branch showed a greater rooting capacity than those harvested from the base. Winter cuttings showed the best rooting capacity than autumn cuttings. IBA treatment (200 mg/l), high humidity (98-100%), and wounding increased the rooting capacity of the cuttings. The sprout of new leaves was higher in basal cuttings, while IBA and wounding also significantly enhanced the root number of rooted cuttings. A method for vegetatively propagating C. istria plants is given.     

Comparison of image and rapid field assessments of riparian zone condition in Australian tropical savannas

Suitable methods for measuring and monitoring the condition of riparian environments are being investigated by government agencies responsible for maintaining these environments in Australia. The objective of this work was to compare two riparian condition assessment approaches, the Tropical Rapid Appraisal of Riparian Condition (TRARC) method developed for rapid on-ground assessment of the environmental condition of savanna riparian zones and an image based riparian condition monitoring scheme. Measurements derived from these two approaches were compared and correlated. The sample representativeness of the TRARC method was evaluated and the cost-effectiveness and suitability for multi-temporal analysis of the two approaches were assessed. Two high spatial resolution multi-spectral QuickBird satellite images captured in 2004 and 2005 and coincident field data covering sections of the Daly River in the Northern Territory, Australia were used in this work. Both field and image data were processed to map indicators of riparian zone condition including percentage canopy cover, organic litter on the ground, canopy continuity, tree clearing, bank stability, and flood damage. Spectral vegetation indices, image segmentation, and supervised classification were used to produce riparian health indicator maps. QuickBird image data were used to examine if the spatial distribution of TRARC transects provided a representative sample of ground based estimates of riparian health indicators. Covering approximately 3% of the study area, the sample mean of the TRARC estimates of individual indicators of riparian zone condition were in most cases within 20% of the global mean derived from the whole imaged riparian area. The cost-effectiveness of the image based approach was compared to that of the ground based TRARC method. Results showed that the TRARC method was more cost-effective at spatial scales from 1 km to 200 km of river in relatively homogeneous riparian zones along rivers with only one channel, while image based assessment becomes more feasible at regional scales (200–2000 km of river). A change detection analysis demonstrated that image data can provide detailed information on gradual change, while the TRARC method is less suited for multi-temporal analysis due to the ranked data format, which inhibits precise detection of change. However, results from both methods were considered to complement each other for single date assessment of riparian zones if used at appropriate spatial scales.     

Transverse shrinkage in G-fibers as a function of cell wall layering and growth strain

Transverse drying shrinkage was measured at microscopic and mesoscopic levels in poplar wood characterised by an increasing growth strain (GS), from normal to tension wood. Results show that: (a) the drying shrinkage, measured as a relative thickness decrease, was significantly higher for G-layer (GL) than for the other layers (OL), GL shrinkage was not significantly correlated with GS, and OL shrinkage was negatively correlated with GS. (b) In gelatinous fibre (G-fibre), lumen size increased during drying and this increase was positively related with GS, but in normal wood fibre, lumen size decreased during drying. These findings suggest that GL shrank outwards (i.e., its internal perimeter increases), so that its shrinkage weakly affected the total cell shrinkage and the mesoscopic shrinkage was controlled by the OL shrinkage which shrank inwards (i.e., its external perimeter decreases). (c) Measurements done on 7 × 7 mm2 thin sections evidenced a negative correlation between transverse shrinkage and GS, significant in T direction but weak in R direction. These observations at both levels allow to discuss the contribution of GL to the mesoscopic shrinkage of tension wood.