Modelling selective breeding in protandrous,batch‐reared Asian sea bass (Lates calcarifer,Bloch) using walkback selection

A bioeconomic simulation model for Lates calcarifer predicted that a strategy involving crossing current generation males with previous generation females would be a practical, effective and profitable way of dealing with protandry when batch rearing for selective breeding to improve the growth rate. The strategy allowed earlier initialization and more frequent ongoing rounds of selection, and resulted in a 16–19% higher overall response, than an alternative where each generation's males were crossed with the same generation's females. The strategy also yielded the highest short‐term benefit–cost ratio (13:1 versus 7:1 after 8 years of selective breeding) and the highest short‐ and long‐term value for participants in a breeding cooperative (a net present value of AU$28 million and an internal rate of return of 144% over 10 years), due to higher yields per fixed costs of production per unit area and due to savings in feed costs per kilogram of production. Breeding facilities of scale producing 50 full‐sibling families per generation were found to be more profitable than those producing 100 families.     

The microbial biodegradation of paraquat in soil

The microbial degradation of [¹⁴C]paraquat using cultures from two agricultural soils was investigated. The experiments were carried out in the absence of light, under aerobic conditions. Degradation was rapid, with 50% mineralisation to [¹⁴C]carbon dioxide occurring within three weeks. HPLC, capillary electrophoresis and mass spectroscopy confirmed that the majority (>85%) of the remaining radiochemical in solution was [¹⁴C]oxalic acid, and that no paraquat remained.     

Deposition of aerially applied tebufenozide (RH5992) on balsam fir (Abies balsamea) and its control of spruce budworm (Choristoneura fumiferana [Clem.])

A field trial was conducted in 1994 to determine the foliar deposit of tebufenozide (RH5992), applied aerially, and its efficacy against spruce budworm, Choristoneura fumiferana (Clem.). A commercial 240 g litre^-1 formulation of the insecticide (Mimic 240LV) was mixed with water, dyed with a tracer dye (Rhodamine WT) and sprayed with a light fixed-wing aircraft. Six application strategies were tested. Five used 70 g AI ha^-1 in a spray volume of 1 or 2 litre^-1 ha^-1 with single or double applications; the sixth was an unsprayed control. Results show that the spectra of the spray applications were, with one exception, fairly uniform. Volume and number median diameters ranged from 100 to 130 μm and 27 to 72 μm, respectively. Mean number of drops cm^-2 on Kromekote cards were <2·0 for strategies where either 1 or 2 litre ha^-1 were sprayed. Nevertheless no one strategy produced droplet densities that were significantly different (P<0·05) from the other strategies. Tebufenozide recovered from foliage averaged 2·5 to 5·9 μg g foliage^-1 when 1 litre ha^-1 was sprayed and 5·8 to 6·8 μg g foliage^-1 after 2 litre ha^-1 were sprayed. When a single application was the strategy used, the mean number of droplets cm^-2 and μg tebufenozide g foliage^-1 ranged from 1·2 to 1·4 and 2·5 to 5·9, respectively. With double applications, the same response parameters ranged from 0·3 to 1·9 and 2·5 to 6·8, respectively. Budworm population reductions (%) and the number of larvae that survived tebufenozide treatments were significantly different (P<0·05) from the controls. After strategies that used 1 litre spray ha^-1, mean percentage population reductions ranged from 61·4 to 93·6 whereas populations were reduced by 85·6 to 98·3% when 2 litre ha^-1 were sprayed. After double applications the mean percentage population reductions ranged from 93·6 to 98·3, but single application strategies resulted in mean reductions of 61 to 86%. Mean population reductions in the controls were 61%. The mean number of larvae per branch that survived spray strategies of 1 litre ha^-1 ranged from 1·3 to 7·4, and from 0·4 to 1·3 when 2 litre ha^-1 was the spray volume. In the controls an average of 10·2 larvae survived. With one exception, mean percentage defoliation in the treated areas was also significantly less (P<0·05) than that in the control. Mean defoliation in trees sprayed at 1 litre spray ha^-1 ranged from 40 to 62·8% whereas those treated at 2 litre ha^-1 had mean defoliation levels from 31·5 to 62·8%. In contrast, average defoliation in the controls was 92·1%. When a single application was the spray strategy, mean defoliation ranged from 31·5 to 62·8%. These data imply that a double application of tebufenozide at 70 g in 2 litre ha^-1 was the most efficacious strategy. However, analyses of the data also show that the primary influence on deposits and defoliation was interactions between number of applications and spray. Nevertheless the two independent variables acted without significant interactions when influencing percentage reductions of spruce budworm populations. © 1998 SCI     

Efficacy of Seed Aging and Gibberellin Treatments for Manipulating Apical Dominance,Tuber Set and Size Distribution of cv. Shepody

The cultivar Shepody has excellent early processing qualities and produces above average tuber yields but sets relatively few tubers that often become excessively large relative to market demand. Optimizing tuber set and size of Shepody for seed and frozen processing markets currently entails adjusting in-row spacing and vine kill date. However, arresting tuber growth by vine killing for size control sacrifices yield potential. Aging seed by storing at 12, 22, and 32°C for 80-, 450-, and 900-degree days, or gibberellin (GA) treatments, were evaluated as more direct approaches for modulating stem number (apical dominance), tuber set, and size distribution relationships. Shepody proved to be inherently resistant to high temperature-induced age-priming treatments. In contrast to other cultivars studied previously, age-priming Shepody seed during storage had no effect on plant emergence and the resulting increases in stem number, tuber set, and associated decreases in average tuber weight were marginal. By contrast, GA applied as seed dip or spray effectively hastened plant emergence, reduced apical dominance, increased tuber set, and decreased average tuber size. The magnitude of these GA-induced effects depended on concentration and application technique (seed dip versus spray). For frozen processing, GA applied as a seed dip at 1 mg L^-1 added an additional tuber per plant and decreased average tuber size by 15% without affecting U.S. No. 1 tuber yields and gross returns; however, 2 and 3 mg L^-1 GA decreased U.S. No. 1 tuber yields and crop value by an average of 16 and 14%, respectively. Spray applications of 2–6 mg L^-1 GA also reduced U.S. No. 1 tuber yield and frozen processing value. Conversely, the increase in tuber set (1.5 tubers plant^-1) and associated 25% reduction in average tuber weight induced by 2 mg L^-1 GA applied as either dip or spray increased gross crop values on a seed contract by 25 and 38%, respectively. The differential efficacies of dip versus spray applications of GA on tuber set and size distribution were likely attributable to differences in GA deposition on the seed. Applying low concentrations of GA to cut seed of Shepody as either a dip (1–2 mg L^-1) or spray (2 mg L^-1) effectively modulated tuber set and size to significantly increase gross returns for seed, and to better satisfy the needs of processors for more moderate size tubers.     

The effect of VRN1 genes on important agronomic traits in high‐yielding Canadian soft white spring wheat

For reproductive success, flowering time must synchronize with favourable environmental conditions. Vernalization genes play a major role in accelerating or delaying the time to flowering. We studied how different vernalization (VRN1) gene combinations alter days to flowering and maturity and consequently the effect on grain yield and other agronomic traits. The study focussed on the effect of the VRN1 gene series (Vrn‐A1, Vrn‐B1 and Vrn‐D1) and their combinations. The Vrn gene group Vrn‐A1a, Vrn‐B1, vrn‐D1 was the earliest to flower and mature, while Vrn‐A1b, Vrn‐B1, vrn‐D1 was the latest to flower. Spring wheat lines with vrn‐A1, Vrn‐B1, Vrn‐D1 were the highest yielding and matured at a similar time as those having vernalization genes Vrn‐A1a, Vrn‐B1 and Vrn‐D1. The findings of this study suggest that the presence of Vrn‐D1 has a direct or indirect role in producing higher grain yield. We therefore suggest the introduction of Vrn‐D1 allele into higher‐yielding classes within Canadian spring wheat germplasm.     

Environmental and spatial characterisation of bacterial community composition in soil to inform sampling strategies

Soil physicochemical properties and microbial communities are highly heterogeneous and vary widely over spatial scales, necessitating careful consideration of sampling strategies to provide representative and reproducible soil samples across field sites. To achieve this, the study aimed to establish appropriate sampling methodology and to determine links between the variability of parameters, utilising two sampling strategies. The first (design 1) involved extracting 25 cores from random locations throughout the field and pooling them into five sets of five cores. The second (design 2) involved a further 25 cores within five 1 m² sub-plots. Sub-samples from each sub-plot were pooled in order to determine between and within sub-plot variability. All samples were analysed independently and as pooled sub-samples. Results indicate that pooling spatially separated samples significantly reduced the variability in pH, compared to individual samples. Pooling samples from a small area resulted in lower within sub-plot variability than between sub-plots for pH and bacterial community composition assessed by terminal-restriction fragment length polymorphism analysis. Following multivariate statistical analysis, a large amount of variation in community composition was explained by soil pH, which is remarkable given the relatively small size of the sampling area and minor differences in pH. Moisture content was also important in determining bacterial communities in the random design (design 1). In the 1 m² sub-plot design (design 2), the spatial location of the plots explained a large degree of the variation in bacterial community composition between plots, which was due to spatial autocorrelation of pH and possible additional environmental parameters. This study emphasises the importance of sampling design for obtaining representative samples from soil.     

Stable carbon isotopes accurately predict diet selection by sheep fed mixtures of C3 annual pastures and saltbush or C4 perennial grasses

The stable carbon isotope technique has been widely used to infer the dietary ecology of a range of animal species; however calibration of the technique with animals fed known diets is essential for accurate back-calculation of dietary preferences. The aim of this study was to identify suitable samples and back-calculation methods to predict short-term (2 to 3 week) dietary selection by sheep among plants with C₃ and C₄ photosynthetic pathways. Variation in integration time of dietary carbon into plasma and faeces; diet-tissue discrimination of carbon isotopes (fractionation) and the importance of accounting for the digestible or indigestible components of the diet was investigated. The results indicate that faecal and rumen samples provided the most accurate prediction of short term dietary changes in sheep selecting between C₃ and C₄ plants. The most accurate back-calculation method for these samples used δ¹³C of the C₃ and C₄ plants and accounted for both diet-tissue discrimination and differences in the indigestibility between the C₃ and C₄ forage. For faecal samples, the organic matter content of the diet originating from C₄ plants could be predicted with a mean error as low as 2.7%. Wool and plasma samples were not conducive to predicting proportion of C4 forage in the diet within 18 days after a change in diet; however plasma could be used to discriminate between animals fed 100% C₃ and C₄ diets after 3 days. The δ¹³C technique provides a valuable tool for researchers when designing pastures for dual environmental and production purposes. An understanding of what sheep select allows for development of appropriate grazing management strategies to optimise productivity and/or persistence of target species.     

多喷枪协同式喷涂五轴混联机器人设计

针对大型扁平型立方体工件的喷涂工艺特点,将并联机构应用于喷涂工艺,设计了一种控制解耦性很好的五轴混联喷涂机器人,阐述了这种喷涂机器人的机构设计、工作原理、运动学分析、驱动方式、控制系统硬件组成及其控制方式。该机器人具有结构紧凑、喷涂效率高、涂层厚度均匀和操作简便等特点,具有较好的应用前景。     

蔬菜泥炭营养块育苗技术研究

蔬菜育苗由于常年在温室内进行,苗期病害和土传病害加重。因此,需要每年用无病菌或病菌较少的新土。文章针对这个问题选用了泥炭营养块育苗,以常规营养钵和撒播育苗为对照。结果表明,泥炭营养块比常规育苗出苗期提前,株高和茎粗有所增加,可提早采收,增加产量。     

The physical action of three diatomaceous earths against the cuticle of the flour mite Acarus siro L. (Acari: Acaridae)

Experiments examined the accepted modes of action of the desiccant dust, diatomaceous earth (DE), against the flour mite, Acarus siro (L.) (Astigmata). Adult mites were exposed to three DE products for periods of 3, 18 and 72 h under conditions designed to allow partial desiccation of the mites without causing mortality. After exposure, the DE dust particles were washed off the mite bodies, and both the DE and the mites were examined for presence of cuticular hydrocarbons by gas chromatography-mass spectroscopy (GC-MS) analysis. GC-MS identified seven major cuticular lipids of chain length C(13)--C(26) that may have a role in the waterproofing of A. siro. After 18 h exposure, n-tridecane and several different long-chain fatty acid ethyl esters were detected on one of the DE products. After 72 h, n-tridecane was detected on all three DE products. Mite samples retained after removal of the DEs were examined by microscopy. Tentative evidence was observed by conventional low-power microscopy that might indicate uniform removal of the epicuticle. However, a detailed examination by scanning electron microscopy showed no signs of abrasion.