Optimization of Collaborative Photo-Fenton Oxidation and Coagulation for the Treatment of Petroleum Refinery Wastewater with Scrap Iron

The photo-Fenton oxidation treatment combined with a coagulation/flocculation process was investigated for removal of chemical oxygen demand (COD) from a refractory petroleum refinery wastewater. Scrap iron shavings were used as the catalyst source. A response surface methodology (RSM) with a cubic IV optimal design was employed for optimizing the treatment process. Kinetic studies showed that the proposed process could be described by a two-stage, second-order reaction model. Experiments showed that precipitation of iron ions can be utilized as a post-oxidation coagulation stage to improve the overall treatment efficiency. More than 96.9% of the COD removal was achieved under optimal conditions, with a post-oxidation coagulation stage accounting for about 30% of the removal, thus confirming the collaborative role of oxidation and coagulation in the overall treatment. A low-velocity gradient of 8.0 s^?1 for a short mixing time of 10 min resulted in optimum post-oxidation coagulation. Comparison of photo-Fenton oxidation to a standard Fenton reaction in the same wastewater showed more rapid COD removal for photo-Fenton, with an initial second-order rate constant of 4.0 × 10^?4 L mg^?1 min^?1 compared to the Fenton reaction’s overall second-order rate constant of 7.0 × 10^?5 L mg^?1 min^?1.     

Chlorobenzene Release During Thermal Drying of Sludge: Mechanism and Source

A dispersive liquid–liquid microextraction (DLLME) method was optimized for the detection of chlorobenzene (CB) compounds in the drying process of municipal and dyeing sludge. Compared with traditional methods, the optimized DLLME not only has a lower limit of detection but also saves analysis time and requires less amount of organic solvent. Using this method in analyzing CB release during sludge drying, we found that drying temperature is the main factor controlling the amount of chlorobenzene release during sludge drying. In addition, we found that most CBs were released when sludge drying entered into the second falling rate stage, i.e., a period when sludge moisture content was low and temperature was high. By analyzing organic matter content in association with CB release during sludge drying, the relationship between organic matter transformation and chlorobenzene release was established. The results provide scientific basis and technical support for assessing the risks of the secondary pollution of CBs from sludge drying.     

Metam Sodium (MS) in Water and Cane Juice at Different Processing Conditions According to the Industrial Case. Part 1. Effects of Matrix,pH, Temperature,Processing Time,and Photolysis

The process for extracting sugarcane juice (Saccharum officinarum) represents the point of greatest contamination in sugarcane mills. Sodium dithiocarbamate also known as metam-sodium or MS is added to inhibit the growth of microorganisms especially Leuconostoc mesenteroides which is responsible for forming polysaccharides. Metam-sodium, upon decomposition, produces highly toxic byproducts. According to literature, under acidic conditions, MS is hydrolyzed resulting in methylamine (MA), CH₃NH₂, and carbon disulfide (CS₂), and in dilute alkaline solutions, MS produces an oxidation reaction characterized by the formation of elemental sulfur (S) and methyl isothiocyanate (MITC). In this paper, it was studied how MS decomposes to MITC and/or MA considering the effects of the matrix (methanol and water); of temperature (4 and 25 °C); of processing time (0, 1, 2, 3, 4 days); and of pH (4.0, 4.5, 7.0). A second experimental design considering the effects of the matrix (water and sugarcane juice); of temperature (4, 25, 35, 45 °C); of processing time (30, 300 min); and of pH (4.0, 4.5, 7.0) was derived from the results obtained considering MITC and/or MA formation. According to the statistical analysis of these results (p < 0.05), the order of the influential factors was as follows: time > matrix > pH > temperature. Results also indicated that the water matrix at pH = 4.5 and 45 °C had the lowest degradation rate (k), with a value of 8.82 day^?1, while for the sugarcane juice matrix at the same pH and temperature conditions was larger, with a k value of 30.07 day^?1. These results show that the matrix is also important for the degradation of dithiocarbamate to MITC and to MA.     

Estimating Disease Prevalence Using Inverse Binomial Pooled Testing

Monitoring populations of hosts as well as insect vectors is an important part of agricultural and public health risk assessment. In applications where pathogen prevalence is likely low, it is common to test pools of subjects for the presence of infection, rather than to test subjects individually. This technique is known as pooled (group) testing. In this paper, we revisit the problem of estimating the population prevalence p from pooled testing, but we consider applications where inverse binomial sampling is used. Our work is unlike previous research in pooled testing, which has largely assumed a binomial model. Inverse sampling is natural to implement when there is a need to report estimates early on in the data collection process and has been used in individual testing applications when disease incidence is low. We consider point and interval estimation procedures for p in this new pooled testing setting, and we use example data sets from the literature to describe and to illustrate our methods.     

Intra-varietal genetic diversity of the grapevine (<Emphasis Type="Italic">Vitis vinifera</Emphasis> L.) cultivar ‘Nero d’Avola’ as revealed by microsatellite markers

The Sicilian grape cultivar ‘Nero d’Avola’ is among the oldest and most cultivated in the island, taking part in the production of several red wines exported worldwide, including DOC wines (Etna Rosso and Cerasuolo di Vittoria). Due to the ancient origin and repeated clonally propagation of the cultivar, phenotypic variability has been observed. Clone identification in this important cultivar has so far relied on phenotypic and chemical traits analyses, often affected by environmental conditions. Genetic markers, such as microsatellites, are particularly useful for cultivar identification, parentage testing, pedigree reconstruction and population structure studies. In the present paper, microsatellites were used to analyze the intra-varietal genetic diversity among 118 plants of ‘Nero d’Avola’, collected in 30 vineyards displaced in different areas of Sicily. Out of 22 microsatellites, 11 showed polymorphism among samples and 15 different phylogenetic groups were identified. Results show that ‘Nero d’Avola’ actually comprises different genetic profiles, although most of clones share a common origin.     

Genetic diversity of diploid Japanese strawberry species based on microsatellite markers

The United States Department of Agriculture (USDA)—Agricultural Research Service (ARS)—National Clonal Germplasm Repository (NCGR) in Corvallis, Oregon, is a genebank that preserves strawberry genetic resources. Representatives of two Japanese diploid species, Fragaria iinumae Makino and F. nipponica Makino were collected for conservation by the NCGR during an expedition to Hokkaido, Japan. Fragaria iinumae may be a genome contributor to the cultivated octoploid strawberries. The objective of this study was to evaluate the genetic diversity of these two species by using simple sequence repeat (SSR) markers. Twenty of 82 Fragaria-derived SSRs, polymorphic among and within the two species, were selected for genetic analysis of 137 accessions. Genetic diversity, based on the proportion of shared alleles between the two species, in F. nipponica (0.4542) and F. iinumae (0.1808) was significantly different. Three wild interspecific hybrids were identified from intermediate memberships in the two diploid species groups revealed by using the clustering program, Structure. Principal coordinate analysis followed by non-parametric modal clustering (PCO-MC) grouped accessions into two clusters representing the two diploid species. Further clustering within the species groups generated with the program, STRUCTURAMA^TM, resulted in seven subclusters in F. iinumae and three in F. nipponica, which may represent breeding populations appropriate for clonal conservation. Long-term preservation of the species populations and the limited number of hybrids on the island is discussed relative to their geographical distribution and the geological history of Hokkaido Island.     

Nitrogen loading levels affect abundance and composition of soil ammonia oxidizing prokaryotes in semiarid temperate grassland

Purpose  

Global nitrogen deposition has profound impact on the terrestrial ecosystem including the semiarid temperate grassland, causing vegetation community shifts and soil acidification. Little is known regarding the effect of nitrogen (N) deposition on the belowground microbial communities. This study aimed to examine the response of ammonia-oxidizing bacteria (AOB) and archaea (AOA) to added N in semiarid temperate grassland.     

Characterization of <Emphasis Type="Italic">Prosopis cineraria</Emphasis> (L.) Druce germplasm with suitable horticultural traits from the hot arid region of Rajasthan,India

Sixteen germplasm accessions of Prosopis cineraria with suitable horticultural traits were identified from north-western Rajasthan, India, propagated clonally by budding on seedling rootstock and maintained in the field gene bank. Morphological characterization of seven-year-old trees of these accessions by 21 traits indicated a lot of variation among the accessions tested. Higher number of flowers per raceme was found in accession CIAH/K2, higher width of ripened pod in CIAH/K5, higher number of seeds per pod in CIAH/K12 and a higher weight of seed per pod in CIAH/K6. Overall, CIAH/K16 was found to be a superior genotype for most of the useful traits. High significant positive correlation was obtained with traits useful for horticultural values. Out of 62 random decamer primers for random amplification (RAPD) reaction, and four minisatellite core sequence for direct amplification of minisatellite DNA (DAMD) screened with these accessions, 12 RAPD and 2 DAMD primers were found polymorphic. Average polymorphism resolved by these markers among the accessions was 93.2%. Genetic diversity revealed by Jaccard’s co-efficient was between 0.11 and 0.77, and four major clusters were identified among these accessions by phylogenetic analysis using NTSYSpc-2.02e software. This study shows the existence of high genetic diversity within these accessions.     

Erosion characteristics and floc strength of Athabasca River cohesive sediments: towards managing sediment-related issues

Purpose  

This research aims to investigate: (1) the evolutional sequence of erosion of cohesive sediments entering the Athabasca River, (2) the influence of consolidation/biostabilization time on bed sediment stability, and (3) the implication of these results on contaminant transport within the Athabasca River.