Chemical modification and wetting of medium density fibreboard panels produced from fibres treated with maleated polypropylene wax

Medium density fibreboard (MDF) was produced from fibres treated with maleated polypropylene wax. The objectives of this study were to investigate the effect of fibre treatment with maleated polypropylene wax on the advancing and receding contact angle and wicking of MDF panels by the Wilhelmy plate method; to verify the chemical reactions occurring between fibres and maleated polypropylene wax by infrared spectroscopy, and to verify if there are relationships with the water absorption of panels. Three maleated polypropylene wax contents (0, 3, 5%) and two resin types (urea–formaldehyde, UF and melamine–urea–formaldehyde, MUF) were considered in this study. Our results showed that the treatment increased the advancing contact angle of panels bonded with UF resin. The receding contact angles of MDF panels produced from treated fibres with 5% maleated polypropylene wax content were also increased by the treatment. Also, the wicking was reduced by the treatment independent of the maleated polypropylene wax content. Reductions of the wicking were 59% for panels bonded with UF resin and 73% for panels bonded with MUF. Relationships between the wicking and water absorption were observed. Chemical analysis realized by infrared spectroscopy did not detect the presence of an esterification reaction between wood fibres and anhydride groups of the maleated polypropylene wax. This suggests, therefore, that an esterification reaction did not take place or that chemical modifications were so small that they are not visible by infrared spectroscopy.     

Post-emergent herbicidal activity of cineole derivatives

Essential oils are being investigated as potential herbicides or to provide leads to new environmentally and socially acceptable herbicides. Novel hydroxy and ester derivatives of 1,8-cineole and 1,4-cineole were synthesised, by chemical and biological methods, and have shown pre-emergence herbicidal activity against annual ryegrass and radish. Effects on post-emergence activity of these derivatives, as well as 1,8-cineole, eucalyptus oil and the carboxylic acids from which the esters were derived, against annual ryegrass and radish, are reported here. Results suggest that reduced root and shoot growth observed in pre-emergence herbicidal bioassays were due to post-emergence activity rather than delayed germination. All tested substances had a dose-dependent, post-emergence herbicidal activity against annual ryegrass and radish with many derivatives showing improved activity relative to 1,8-cineole and high-cineole eucalyptus oil. However, results do not support the postulate that cineole esters would be more active than their respective carboxylic acid and the hydroxy cineole. Phytotoxicity of ester derivatives may be due to metabolic cleavage of the esters to the hydroxy cineole and carboxylic acid within the plant.     

A statistical analysis of spatiotemporal variations and determinant factors of forest carbon storage under China’s Natural Forest Protection Program

The Natural Forest Protection Program (NFPP) is one of the key ecological forestry programs in China. It not only facilitates the improvement of forest ecological quality in NFPP areas, but also plays a significant role in increasing the carbon storage of forest ecosystems. The program covers 17 provinces, autonomous regions, and municipalities with correspondingly diverse forest resources and environments, ecological features, engineering measures and forest management regimes, all of which affect regional carbon storage. In this study, volume of timber harvest, tending area, pest-infested forest, fire-damaged forest, reforestation, and average annual precipitation, and temperature were evaluated as factors that influence carbon storage. We developed a vector autoregression model for these seven indicators and we studied the dominant factors of carbon storage in the areas covered by NFPP. Timber harvest was the dominant factor influencing carbon storage in the Yellow and Yangtze River basins. Reforestation contributed most to carbon storage in the state-owned forest region in Xinjiang. In state-owned forest regions of Heilongjiang and Jilin Provinces, the dominant factors were forest fires and forest cultivation, respectively. For the enhancement of carbon sequestration capacity, a longer rotation period and a smaller timber harvest are recommended for the Yellow and Yangtze River basins. Trees should be planted in state-owned forests in Xinjiang. Forest fires should be prevented in state-owned forests in Heilongjiang, and greater forest tending efforts should be made in the state-owned forests in Jilin.     

Anisotropy of wood vibrational properties: dependence on grain angle and review of literature data

The anisotropy of vibrational properties influences the acoustic behaviour of wooden pieces and their dependence on grain angle (GA). As most pieces of wood include some GA, either for technological reasons or due to grain deviations inside trunks, predicting its repercussions would be useful. This paper aims at evaluating the variability in the anisotropy of wood vibrational properties and analysing resulting trends as a function of orientation. GA dependence is described by a model based on transformation formulas applied to complex compliances, and literature data on anisotropic vibrational properties are reviewed. Ranges of variability, as well as representative sets of viscoelastic anisotropic parameters, are defined for mean hardwoods and softwoods and for contrasted wood types. GA-dependence calculations are in close agreement with published experimental results and allow comparing the sensitivity of different woods to GA. Calculated trends in damping coefficient (tanδ) and in specific modulus of elasticity (E′/ρ) allow reconstructing the general tanδ-E′/ρ statistical relationships previously reported. Trends for woods with different mechanical parameters merge into a single curve if anisotropic ratios (both elastic and of damping) are correlated between them, and with axial properties, as is indicated by the collected data. On the other hand, varying damping coefficient independently results in parallel curves, which coincide with observations on chemically modified woods, either “artificially”, or by natural extractives.     

Phenol-formaldehyde resin curing and bonding under dynamic conditions

Summary To better understand the curing and bonding behavior of phenol-formaldehyde (PF) resin under dynamic conditions, flakeboards were manufactured either by conventional pressing at 7% or 12% mat moisture content or by steam injection pressing with 10 or 20 seconds steaming duration. Resin-impregnated glass-cloth samples and lap-shear tension specimens were embedded in the core of each flakeboard. After the flakeboards were pressed for various periods of times, the samples and specimens were quickly retrieved. The degree of resin cure was determined on the resin-impregnated glass-cloth samples by dynamic mechanical analysis. The bond strengths were measured from the lap-shear tension specimens on a mechanical testing machine. The results of resin curing and bonding were then correlated to the performance of the resin-bonded boards, which were evaluated by internal bond, modulus of rupture, modulus of elasticity, and thickness swelling. Resin curing and lap-shear bonding did not proceed simultaneously. In conventional pressing, the mat moisture content (MC) at 12% favored resin curing, but slightly retarded lap-shear bonding, as compared to 7%MC. In steam injection pressing, the rates of resin curing and lap-shear bond strength development were much faster for 20 seconds than for 10 seconds of steaming duration. Longer press times were needed to obtain boards with maximum strength in the 12%MC conventional pressing and the 20-s steam duration steam injection pressing than in those conditions where moisture content was lower or steam time was less. The need for longer press times must be attributed to higher internal vapor pressures and/or lower wood and resin component strengths, rather than to incomplete cure or bonding.This material is based on work supported by the Ministry of International Affairs, Quebec Government, the Natural Sciences and Engineering Research Council of Canada, and Laval University (Quebec City). The work was also supported by the U.S. Department of Agriculture under research joint venture agreement FP-92-1835     

Decontamination of synthetic solutions containing heavy metals using chemically modified sawdusts bearing polyacrylic acid chains

New materials containing carboxylate groups have been synthesized by grafting polyacrylic acid onto sawdust. These new adsorbents were subjected to continuous extraction of different metal ions using packed columns to determine their maximum binding capacities. They exhibit binding capacities 15–40 times higher than unmodified sawdusts for removal of Cu²⁺, Ni²⁺, and Cd²⁺ chosen as representative heavy metal ions. Cation desorption and adsorbent regeneration could be effected by elution with a diluted HCl solution; water as an eluent has no effect on metal desorption.     

Temperature-dependent differences in biological traits between two strains of <Emphasis Type="Italic">Trichogramma cacoeciae</Emphasis> (Hymenoptera: Trichogrammatidae)

Parasitoids’ efficiency in controlling pests depends not only on their ability to parasitize their hosts but also on how much they are adapted to climatic conditions (notably temperature) of the area where they are planned to be released. In addition, the optimal conditions for production of parasitoids used for inundative releases like Trichogramma spp. may also vary largely as a function of strains. Using the parasitoid Trichogramma cacoeciae Marchal as biological model, we studied how temperature affects important parasitoid efficiency-related biological traits under laboratory conditions. Emergence, mortality rates and fecundity of two strains of T. cacoeciae, one originating from France (Alsace) and the other one from Tunisia (Degache), were compared at constant temperatures of 15, 20, 25 and 30°C. The parasitoids of the French strain showed highest fecundity at 25°C with wasps that had been reared at 20 or 25°C. The Tunisian strain showed the highest fecundity at 25°C, but only when wasps were previously reared at 25 or 30°C. For both strains, the highest mortality occurred among wasps that had laid eggs at 30°C. Emergence rates were relatively high at all temperatures, although the French strain did better at 15–25°C and the Tunisian one at 20–30°C. Because of the differences in biological traits of these two T. cacoeciae strains in relation to the temperature, a judicious choice must be made among the various strains when using this species in biological control programs.     

Deformation on nearby faults induced by the 1999 Hector Mine earthquake

Interferometric Synthetic Aperture Radar observations of surface deformation due to the 1999 Hector Mine earthquake reveal motion on several nearby faults of the eastern California shear zone. We document both vertical and horizontal displacements of several millimeters to several centimeters across kilometer-wide zones centered on pre-existing faults. Portions of some faults experienced retrograde (that is, opposite to their long-term geologic slip) motion during or shortly after the earthquake. The observed deformation likely represents elastic response of compliant fault zones to the permanent co-seismic stress changes. The induced fault displacements imply decreases in the effective shear modulus within the kilometer-wide fault zones, indicating that the latter are mechanically distinct from the ambient crustal rocks.     

Carbon dynamics determined by natural C abundance in microcosm experiments with soils from long-term maize and rye monocultures

Understanding carbon dynamics in soil is the key to managing soil organic matter. Our objective was to quantify the carbon dynamics in microcosm experiments with soils from long-term rye and maize monocultures using natural ¹³C abundance. Microcosms with undisturbed soil columns from the surface soil (0-25 cm) and subsoil (25-50 cm) of plots cultivated with rye (C₃-plant) since 1878 and maize (C₄-plant) since 1961 with and without NPK fertilization from the long-term experiment ‘Ewiger Roggen’ in Halle, Germany, were incubated for 230 days at 8 °C and irrigated with 2 mm 10⁻² M CaCl₂ per day. Younger, C₄-derived and older, C₃-derived percentages of soil organic carbon (SOC), dissolved organic carbon (DOC), microbial biomass (C_mic) and CO₂ from heterothropic respiration were determined by natural ¹³C abundance. The percentage of maize-derived carbon was highest in CO₂ (42-79%), followed by C_mic (23-46%), DOC (5-30%) and SOC (5-14%) in the surface soils and subsoils of the maize plots. The percentage of maize-derived C was higher for the NPK plot than for the unfertilized plot and higher for the surface soils than for the subsoils. Specific production rates of DOC, CO₂-C and C_mic from the maize-derived SOC were 0.06-0.08% for DOC, 1.6-2.6% for CO₂-C and 1.9-2.7% for C_mic, respectively, and specific production rates from rye-derived SOC of the continuous maize plot were 0.03-0.05% for DOC, 0.1-0.2% for CO₂-C and 0.3-0.5% for C_mic. NPK fertilization did not affect the specific production rates. Strong correlations were found between C₄-derived C_mic and C₄-derived SOC, DOC and CO₂-C (r≥0.90), whereas the relationship between C₃-derived C_mic and C₃-derived SOC, DOC and CO₂-C was not as pronounced (r≤0.67). The results stress the different importance of former (older than 40 years) and recent (younger than 40 years) litter C inputs for the formation of different C pools in the soil.     

Phenolic composition of champagnes from Chardonnay and Pinot Noir vintages

Nineteen phenolic compounds including hydroxybenzoic acids, hydroxycinnamic acids, flavonoids, phenolic alcohols, and phenolic aldehydes have been identified and quantified in two monovarietal champagnes, Chardonnay and Pinot Noir, by using a reverse-phase high-performance liquid chromatography (HPLC) system coupled with diode array detection. The identification of four hydroxycinnamic tartaric esters (caftaric, coutaric, fertaric, and 2-S-glutathionylcaftaric acids), two flavanonols (astilbin and engeletin), and some other compounds was confirmed by HPLC coupled with mass spectrometry. Caftaric acid and tyrosol were the major phenols. Hydroxybenzoic acids and flavonoids were present at low concentrations. The phenolic compositions of 2000 and 2001 Chardonnay and Pinot Noir vary quantitatively according to the year and the variety, but the chemical natures of the molecules are the same. The total phenolic content determined by colorimetric measurement ranges from 176 to 195 mg/L of gallic acid equivalent and is similar to that described in white wines.