Management Effects on Soil Organic Carbon Stock in Mediterranean Open Rangelands—Treeless Grasslands

Soil organic carbon (SOC) is subject to relatively rapid changes. In grasslands soils, the management system influences these changes. Therefore, these soils play a crucial role in climate change mitigation. Current research has developed strategies and methodologies to help us understand their role as a carbon sink. In this study, the SOC and total nitrogen contents and stocks (SOC‐S) and their variation with depth were evaluated in annual crop rotations (cereal–fallow). Fifty soil profiles were sampled in the Los Pedroches Valley (southern Spain). This area consists of Mediterranean open rangelands—treeless grasslands with cereal–fallow rotation, under two management systems: long‐term (20 years) organic farming (OF) and conventional tillage (CT). The studied soils were Cambisols (CM), Leptosols (LP) and Luvisols (LV). The objective of this research was to determine any management system effects (OF vs CT) on SOC and total nitrogen contents and stocks and their variation with profile depth. It was observed that SOC concentration decreased with depth (Ah–Ap > Bw > C). The SOC concentration was higher in the top soil for all studied soils in OF compared with CT. The highest totals of SOC‐S were found in LV‐OF (66·01 Mg ha⁻¹) and the lowest in LP‐CT (21·33 Mg ha⁻¹). Significant differences (p < 0·05) between soils types and management practices were found in carbon stocks, increasing the SOC‐S in OF compared with that in CT in all studied soils; this increase was 75·25%, 85·73% and 234·88% for CM, LV and LP, respectively. The results indicated that management practices significantly influence SOC‐S in the Los Pedroches Valley and, consequently, OF in annual crop rotations (cereal–fallow) is an excellent alternative to CT that increases the SOC content in Mediterranean open rangelands—treeless grasslands environments. Copyright © 2013 John Wiley & Sons, Ltd.     

Influence of cultivar and germination on bioactive amines in soybeans (Glycine max L. Merril)

The levels of amines in soybeans as affected by cultivar in two consecutive years and by germination were investigated. Spermidine, spermine, putrescine, agmatine, and cadaverine were detected, whereas tyramine, histamine, tryptamine, serotonine, and phenylethylamine were not. Spermidine was the predominant amine followed by spermine. High concentrations of these amines confirmed soybean as a rich source. Cadaverine was confirmed to be inherent to soybean. The percent contribution of spermidine and spermine to total levels was not affected by cultivar in either years. However, amine levels were affected by cultivars in different ways in the consecutive years. Cadaverine was affected more by the cultivar, whereas spermidine, spermine, and agmatine were affected by harvest year. During germination the levels of amines from soybean increased significantly, except for agmatine. Spermidine and spermine accumulated in the cotyledon, whereas cadaverine and putrescine accumulated in the radicle and hypocotyl.     

Quality Assessment of Three Industry-Derived Organic Amendments for Agricultural Use

The quality of three types of treated sludges (sludge from the paper recycling industry, and sewage sludge treated by composting with pruning waste and thermally dried) was assessed in this work. The amendments were physicochemically characterized and evaluated for their microbiological quality and for contamination with pollutants. All three organic amendments showed an absence of pathogens, so they are microbially suitable for agricultural use. The pollutants studied in the amendments included eight heavy metals and 83 organic compounds. Heavy metals, pesticides, polycyclic aromatic hydrocarbons, octylphenol, bisphenol A, and parabens were found in the organic amendments. The amount and type of contaminants depended on the sample sources and differed between samples from a single origin. The presence of some of the pollutants found has not been previously reported in organic amendments. The germination assay showed that these amendments may be applied to soil in controlled doses. As far as we know, this is the first reported study that has evaluated a great variety of pollutants (heavy metals, pesticides, persistent and emerging organic pollutants) in sludge from the recycled paper industry; moreover, studies in other waste products in which such a broad range of pollutants has been evaluated have been scarce until now due to the complexity of these matrices.     

Heavy metal distribution and electrical conductivity measurements in biosolid pellets

Purpose

Contamination of soils by potentially toxic elements (e.g. Cd, Ni, Cr, Pb) from amendments of biosolids is subject to strict controls within the European Union. Today, the use of biosolids to improve the nutrient content in a soil is a common practice. The present research was conducted to determine electrical conductivity in biosolid pellets (dry wastes) using an innovative methodology. On the other hand, the present study was designed to examine the partition of selected heavy metals in biosolid pellets and also to relate the distribution patterns of these metals.

Materials and methods

In this context, heavy metal concentrations were studied in biosolid pellets under different pressures. Electrical conductivity measurements were taken in biosolid pellets under pressures on the order of 50 to 150 MPa and with currents of 10^?15 A. Measurements of electrical conductivity and heavy metal content for different areas (H1, H2, and H3) were taken. Total content of metals was determined following microwave digestion and analysed by inductively coupled plasma mass spectrometry (ICP/MS). Triplicate portions were weighed in polycarbonate centrifuge tubes and sequentially extracted.

Results and discussion

The distribution of chemical forms of Cd, Ni, Cr, and Pb in the biosolids was studied using a sequential extraction procedure that fractionates the metal into soluble-exchangeable, specifically sorbed-carbonate-bound, oxidizable, reducible, and residual forms. The residual, reducible, and carbonate-sorbed forms were dominant. Higher Cr and Ni content were detected in pellets made with biosolids from the H3 horizon. The highest Cd and Ni values were detected in the H2 horizon.

Conclusions

The trends of the conductivity curves were similar for the sludge from the isolation surface horizon (H1) and for the horizon in the mesophilous area (H2). In the case of the horizon in the thermophilous area (H3), the electrical conductivity showed extremely high values. This behaviour was similar in the case of the Cr and Ni content. However, in the case of Cd and Pb, the highest values were detected in the H2 horizon. This experiment could be useful for establishing a general rule for taking measurements of electrical conductivity and heavy metals in biosolid pellets and other types of dry wastes.

     

Rapid identification of seaweeds in food products by PCR combined with ALF-RFLP and FINS methodologies

In the present study, two methods for the genetic identification of the most important seaweed species used for human consumption were developed. Both are carried out through PCR amplification of an 18S rRNA gene fragment. The first one is based on the phylogenetic analysis of DNA sequences (FINS), while the second is based on length polymorphism and RFLP visualized by means of an ALF system. The main novelty of this work lies in the fact that it allows genetic identification of the main commercial species of seaweed. Moreover, the developed systems can be applied to all kinds of processed products, including those that have undergone intensive transformation, as for instance canned foods. These methodologies also permit the detection of species in complex matrixes where more than one algal species is present. The methods were validated using products manufactured in a pilot plant showing correct functioning. Finally, the methods were applied to 23 commercial samples including some that had been subjected to intensive thermal treatment, allowing the detection of those that were incorrectly labeled (30%). Therefore, these molecular tools can be used for clarifying questions related to the correct labeling and traceability of commercial products that include some seaweeds in their composition.     

Heavy Metal Pollution in Soils Around the Abandoned Mine Sites of the Iberian Pyrite Belt (Southwest Spain)

This paper investigates the pollution load of selected trace elements in 32 soil samples collected around 21 different mining areas of the Iberian Pyrite Belt (Southwest Spain), integrating chemical data with soil parameters to help understand the partitioning and mobility of pollutants. The minesoils are depleted in acid neutralising minerals and show limiting physicochemical properties, including low pH values and very high anomalies of potentially hazardous metals. The total concentrations of As (up to 1,560 mg kg^?1) and certain heavy metals (up to 2,874 mg kg^?1 Cu, 6,500 mg kg^?1 Pb, 6,890 mg kg^?1 Zn, 62 mg kg^?1 Hg and 22 mg kg^?1 Cd) are two orders of magnitude above the soil background values. The close association of Cd and Zn with the carbonate content in lime-amended minesoils suggests metal immobilisation through adsorption and/or co-precipitation mechanisms, after acid neutralisation, whereas As and Pb are similarly partitioned into the soil and mostly associated with iron oxy-hydroxides.     

Influence of cultivar on quality parameters and chemical composition of strawberry fruits grown in Brazil

Six strawberry cultivars grown on the same commercial plantation in Brazil were evaluated for their chemical composition and quality attributes at the ripe stage. The profiles of the main soluble sugars, ascorbic acid, and anthocyanins were also obtained during the developmental stages. Results showed significant differences among cultivars in all of the investigated parameters. Cv. Campineiro showed an average value for texture of 0.63 N, half the value found for cv. Oso Grande. Anthocyanin content ranged from 13 (cv. Campineiro) to 55 (cv. Mazi) mg/100 g. Total ascorbic acid found for cv. Campineiro (85 mg/100 g) was twice the amount found in cv. Dover (40 mg/100 g). Fructose was the predominant soluble sugar in almost all cultivars. The proportion among the main soluble sugars (fructose, sucrose, and glucose) was similar for Oso Grande and Toyonoka cultivars. The flavonol content (quercetin plus kaempferol derivatives) ranged from 2.7 to 7.1 mg/100 g, with a mean value of 6.1 mg/100 g, whereas free ellagic acid ranged from 0.9 to 1.9 and total phenolics varied from 159 to 289 (mean 221) mg/100 g.     

Soil Contamination in Dumps on the Karstic Areas from the Plateaus (Southeast of Madrid, Spain)

After over 10 years of accumulation of residues in the studied dumps near Madrid, it has been registered low or moderate heavy metals concentrations on the surrounding area. Only occasionally, some rubbish dumps contain significant quantities of Cu, Ni, Zn and Pb. The concentration levels of Pb, Ni, Zn and Cu are safe when they are compared with the surrounding areas levels of heavy metals. The aim of this paper is the analysis of pollutants existing around in the dumps located at the sides of the plateaus of the central valley of the Tajo River (provinces of Madrid and Toledo, Spain). The high karstification rate of the upper layer of these tablelands and the existence of numerous dumps on them (even on their slopes) make these areas vulnerable to heavy metal pollution. However, after several years of use, the concentration of pollutants only reaches moderate values in the studied areas. Dumping materials were collected at four rubbish dumps. The mineralogical composition of the materials were analysed by XRD. Sequential extraction procedure was applied for speciation of the metal forms in the collected samples. Concentrations of Zn, Pb, Ni, Cu, Cr and Cd in extracts were determined by AAS. The studied samples showed high carbonate concentration. Contamination processes are combined there with weathering processes. Heavy metals concentration in control samples (gypsum, limestones, red soils and colluviums) were compared with samples of the studied dump in order to evaluate the pollution level. Concentrations of Zn, Pb, Ni and Cu were variable. The contamination was elevated for samples in depth in relation with weathering process of heavy metals.     

Submerged citric acid fermentation on orange peel autohydrolysate

The citrus-processing industry generates in the Mediterranean area huge amounts of orange peel as a byproduct from the industrial extraction of citrus juices. To reduce its environmental impact as well as to provide an extra profit, this residue was investigated in this study as an alternative substrate for the fermentative production of citric acid. Orange peel contained 16.9% soluble sugars, 9.21% cellulose, 10.5% hemicellulose, and 42.5% pectin as the most important components. To get solutions rich in soluble and starchy sugars to be used as a carbon source for citric acid fermentation, this raw material was submitted to autohydrolysis, a process that does not make use of any acidic catalyst. Liquors obtained by this process under optimum conditions (temperature of 130 degrees C and a liquid/solid ratio of 8.0 g/g) contained 38.2 g/L free sugars (8.3 g/L sucrose, 13.7 g/L glucose, and 16.2 g/L fructose) and significant amounts of metals, particularly Mg, Ca, Zn, and K. Without additional nutrients, these liquors were employed for citric acid production by Aspergillus niger CECT 2090 (ATCC 9142, NRRL 599). Addition of calcium carbonate enhanced citric acid production because it prevented progressive acidification of the medium. Moreover, the influence of methanol addition on citric acid formation was investigated. Under the best conditions (40 mL of methanol/kg of medium), an effective conversion of sugars into citric acid was ensured (maximum citric acid concentration of 9.2 g/L, volumetric productivity of 0.128 g/(L.h), and yield of product on consumed sugars of 0.53 g/g), hence demonstrating the potential of orange peel wastes as an alternative raw material for citric acid fermentation.     

Occurrence of Lipophilic Marine Toxins in Shellfish from Galicia (NW of Spain) and Synergies among Them

Lipophilic marine toxins pose a serious threat for consumers and an enormous economic problem for shellfish producers. Synergistic interaction among toxins may play an important role in the toxicity of shellfish and consequently in human intoxications. In order to study the toxic profile of molluscs, sampled during toxic episodes occurring in different locations in Galicia in 2014, shellfish were analyzed by liquid chromatography tandem mass spectrometry (LC–MS/MS), the official method for the detection of lipophilic toxins. The performance of this procedure was demonstrated to be fit for purpose and was validated in house following European guidelines. The vast majority of toxins present in shellfish belonged to the okadaic acid (OA) group and some samples from a particular area contained yessotoxin (YTX). Since these toxins occur very often with other lipophilic toxins, we evaluated the potential interactions among them. A human neuroblastoma cell line was used to study the possible synergies of OA with other lipophilic toxins. Results show that combination of OA with dinophysistoxin 2 (DTX2) or YTX enhances the toxicity triggered by OA, decreasing cell viability and cell proliferation, depending on the toxin concentration and incubation time. The effects of other lipophilic toxins as 13-desmethyl Spirolide C were also evaluated in vitro.