Effects of sealed pressing and ozonization on properties of styrene-butadiene rubber and polyethylene glycol adhesive bonded board produced by two-stage pressing

Boards were produced by using SP adhesive, which contains styrene-butadiene rubber and polyethylene glycol as major constituents. The use of polyethylene in place of clay, which is also a generally used constituent of SP adhesive, was confirmed to improve board properties. In general, the properties of boards are poorer when produced by two-stage pressing, in which mats are first processed by temporary adhesion and then processed into boards by permanent adhesion; however, the properties of boards produced by two-stage pressing were improved when polyethylene was added to the SP adhesive. In addition, internal bond strength and thickness swelling was greatly improved when boards were produced from ozonized wood and by sealed pressing. Thus, the properties impaired by two-stage pressing were improved by ozonization and sealed pressing.     

Strength properties of laminated veneer lumber in compression perpendicular to its grain

Tests of compression perpendicular to the grain were carried out on laminated veneer lumber (LVL) and timber. The species tested were sugi, radiata pine, karamatsu, akamatsu, and dahurian larch; two sets of sugi specimens were tested, with the sugi LVL products being manufactured in different plants. The strength properties of the materials for different loading directions were compared for LVL and timber. At 5% compressive strain in the same materials, the average stress in the tangential direction of timber was larger than that in the radial direction for all species except for radiata pine, and the average stress in the edge-wise direction of LVL was larger than that in the flat-wise direction for all species except for radiata pine. When the stress at 5% strain was compared in the same direction, the average stress of LVL in the edge-wise direction was larger than that in timber in the tangential direction for all species, but there were no great differences between the average stress of LVL in the fl at-wise direction and that of timber in the radial direction for all species except for radiation pine. There was a close relationship between density and stress at 5% strain in LVL, especially in the edge-wise direction. For all results, radiata pine did not follow the trend of the other species; The large annual ring width of radiata pine was considered to have affected the results.     

Potential use of a spatially constrained harvest scheduling model for biodiversity concerns: Exclusion periods to create heterogeneity in forest structure

The objective of this paper is to investigate potential use of a spatially constrained harvest scheduling model for biodiversity concerns. Change in the degree of biodiversity is represented only by spatial characteristics of harvesting patterns of forest stands with different exclusion periods applied to adjacent forest stands. A spatially constrained harvest scheduling model called SSMART (Scheduling System of Management Alternatives foR Timber-harvest) is used for the analysis. It is one of the heuristics to solve a spatially constrained harvest scheduling problem by using the partitioning heuristic. The algorithm incorporated into SSMART is designed to seek a solution for a multicriteria problem with present net value maximum, meeting spatial feasibility and minimizing period-to-period harvest flow fluctuation, approximating even-flow constraints within the 0–1 integer programming framework. Our experimental analysis shows that the longer exclusion period, the less the harvest flow level and the total present net value are derived and the more heterogeneous the forest structure becomes in terms of the forest stand age distribution. It is also shown that the three exclusion period results in a stable forest stand age distribution over the time horizon for our experimental forest. This research supported by the Grants-in-Aid for Scientific Research (No. 09041071) from the Ministry of Education, Science, Sports, and Culture of Japan.     

The smell and odorous components of dried shiitake mushroom, Lentinula edodes V: changes in lenthionine and lentinic acid contents during the drying process

This study on dried shiitake mushroom [Lentinula edodes (Berk.) Pegler] focuses on the behavior of the aromatic lenthionine compound and its precursor, lentinic acid, during the drying process. Only a small amount of lenthionine was present after the drying process, regardless of the drying temperature or time; however, the amount increased during the rehydration process using pH 8.0 buffer. The lenthionine content after incubation in the buffer was correlated with the lentinic acid content in the dried shiitake mushroom. The lentinic acid content increased signifi cantly during the drying process at 40°C up to 4 h. The results show that the characteristic smell of dried shiitake mushroom was weak after drying, and that rehydration in a mild alkaline solution was necessary to increase the smell. The lentinic acid content of dried shiitake could serve as an indicator of the smell produced by rehydration and would be useful in screening to select odor-rich strains. Moderate heating likely caused the increase in lentinic acid content, which might be related to a reaction to heat.     

Protected area co-management and land use conflicts adjacent to Phu Kao – Phu Phan Kham National Park,Thailand

This study examined land use conflicts between three villages and Phu Kao – Phu Phan Kham National Park in northeast Thailand that resulted from its access and utilization during 2013–2015. The source of conflict is usufruct rights, a government entitlement program designed to honor villagers who lived on the land before it was established as a national park or forest reserve. Ironically, designation of protected areas is not a safeguard for biodiversity. A complex set of rules and regulations control access to resources, but compliance is subject to government oversight and economic pressure to improve quality of life. Granting usufruct rights may reduce certain land use conflicts, but they fail to address agricultural expansion inside park and forest boundaries. For example, agricultural encroachment in this protected area increased by 13.1% during the study period, mainly through cassava plantings. Cassava requires a small amount of maintenance and has a high market value since it is being promoted as an energy crop by the Thai government. A variety of management strategies are needed for sustainable forestry, such as regular forest patrols, reduction of agricultural-based income, and community-based initiatives.     

Stem water transport of Lithocarpus edulis, an evergreen oak with radial-porous wood

The stem water conducting system of an evergreen broad-leaved oak, Lithocarpus edulis (Mak.) Nakai, was investigated. Evergreen broad-leaved oaks (Lithocarpus, Castanopsis, Cyclobalanopsis, Quercus) belonging to the Quercoideae are a major component of Asian monsoon forests, and are characterized by the possession of radial-porous wood. A characteristic of radial-porous wood is the development of aggregate rays between radially oriented files of vessels. We measured the distribution of vessel lumen diameters in a stem cross section and calculated the theoretical water conductivity of the wood. The radial profile of the heat pulse velocity (HPV) was measured for an intact whole tree under field conditions and compared with the theoretical distribution of water conductivity. Soft X-ray photographs of frozen stem sections indicated that most of the vessel lumina were filled with water, including those of vessels more than 20 years old. Even when vessels were relatively wide (lumen diameters > 100 microm), cavitation was negligible. The rate of water uptake from the cut stem base correlated closely with HPV (r = 0.96), and HPV closely reflected the mean volume flow per stem sectional area (SFVS) around the sensor probes. However, the ray tissue sharply inhibited heat transfer, and the positioning of the probes strongly affected the absolute value of HPV. It was also found that HPV more closely reflected the mean sap flow velocity in the vessels than did SFVS.     

Factors Affecting Small-Scale Farmers’ Land Allocation and Tree Density Decisions in an <Emphasis Type="Italic">Acacia decurrens</Emphasis>-Based <Emphasis Type="Italic">taungya</Emphasis> System in Fagita Lekoma District,North-Western Ethiopia

The development of woodlots as an additional source of livelihood and as a land management option for small-scale farmers is a challenging issue in the cereal-based subsistence farming systems of north-western Ethiopia. There is a need to understand why and which factors determine the decisions of small-scale farmers to grow short-rotation woodlots on their land. Data used in this study were collected from a survey of 200 randomly selected households in the region. A Tobit regression model was used to determine predictor variables for farmers’ decisions to allocate land to planting Acacia decurrens (J.C. Wendl.) Willd. and at what density trees are planted on the respective plots. The most important motivations for planting A. decurrens were income, soil fertility management, and soil and water conservation. Having a male head of household, long distance to markets and plots being on marginal land, among other factors, increased the allocation of land to A. decurrens woodlots. Having a male head of household, access to credit and plots being on marginal land, among other factors, increased tree planting density. Age had a negative effect on both allocation of land to woodlots and tree density, whereas farm size had an inverted U-shaped relationship with both decisions. These results suggest that wider expansion of A. decurrens-based plantation systems could be achieved through improving extension, credit access and road infrastructure to connect small-scale farmers to markets and finance.     

Interactive effects of leaf age and self-shading on leaf structure,photosynthetic capacity and chlorophyll fluorescence in the rain forest tree,Dryobalanops aromatica

In the tropical canopy tree, Dryobalanops aromatica Gaertn. f., upper-canopy leaves (UL) develop under sunlit conditions but are subjected to self-shading within the crown as they age. In contrast, lower-canopy leaves (LL) are exposed to uniform dim light conditions throughout their life span. By comparing leaf morphology and physiology of UL and LL, variations in leaf characteristics were related to leaf age and self-shading. Mass-based chlorophyll (chl) concentration and the chlorophyll/nitrogen (chl/N) ratio were lower and the chl a/b ratio was higher in UL than in LL. In UL, the chl/N ratio gradually increased and the chl a/b ratio gradually decreased with leaf aging, whereas these ratios remained unchanged with leaf age in LL. The effective quantum yield of photosystem II (PSII) (DeltaF/F(m)') at a given irradiance remained unchanged with leaf age in LL, whereas DeltaF/F(m)' changed with leaf age in UL. These data indicate N reallocation within the leaves from carbon fixation components to light harvesting components and a dynamic regulation of photochemical processes of PSII in response to increased self-shading of UL. Despite the difference in light environment with leaf age between UL and LL, maximum photosynthetic rates and nitrogen-use efficiency decreased with leaf aging in both UL and LL. Constancy in the chl/N ratio with leaf age in LL indicated that the decrease in photosynthetic capacity was caused by effects other than shading, such as leaf aging. We conclude that N reallocation and acclimation of PSII to self-shading occurred even in mature leaves, whereas the change in photosynthetic capacity with leaf age was more conservative.     

Strength properties of glued laminated timber made from edge-glued laminae II: bending,tensile, and compressive strength of glued laminated timber

The purpose of this study was to investigate the strength properties of glued laminated timber composed of edge-glued laminae and to investigate the influence of edge gluing on the strength properties. Glued laminated timber composed of multiple-grade laminae (symmetrical composition, strength grade E95-F270, 10 laminations) was produced from karamatsu (Larix kaempferi) edge-glued laminae according to the Japanese Agricultural Standard. The bending, tensile, and compressive strengths of the glued laminated timber were measured. The average bending, tensile, and compressive strengths were 33.4, 24.5, and 35.9 MPa, respectively, and these values are almost equal to those of glued laminated timber composed of karamatsu single-piece laminae. It was determined that finger-joints and knots in the edge-glued laminae played a significant role in the failure of specimens. However, the use of glued edge-joints did not appear to affect the failure of specimens.