Herbicide penetration across isolated and intact leaf cuticles

Penetration of four herbicides (atrazine, diclofop-methyl, dinoseb and glyphosate-mono(isopropylammonium) salt) was followed through isolated pear leaf cuticles into agar and across intact cuticles of Argenteum (ARG) mutant pea leaves from monosized droplets (300 μ diam.) during 48 h following application. Penetration into pea leaves ranged from low for glyphosatemono(isopropylammonium) (5% of amount applied) and atrazine (14%) to rapid for dinoseb (91%) and diclofop-methyl (82%). A major proportion (90%) of the dinoseb retained in the tissues underlying the site of droplet application migrated across the cuticle and the epidermal layer of cells. In contrast, only a small proportion (13%) of the dinoseb entering the leaf was transported to the tissues surrounding the treatment zone. Corresponding values for diclofop-methyl were 61% and 4% respectively. Initially, dinoseb also penetrated rapidly through isolated pear leaf cuticles, 36% of the applied dose being recovered in an agar receiver disc 4 h after treatment, but subsequent uptake was slower. Penetration of glyphosate-mono(isopropylammonium) also decreased after 4 h whereas atrazine and diclofop-methyl diffused steadily through isolated cuticles up to 216 h after treatment. The incorporation of ‘Tween 20’ or ‘Agral 90’ (1 g litre^?1) into the formulation reduced the penetration of glyphosate-mono(isopropylammonium) through isolated pear leaf cuticles.     

Soil microstructure alterations induced by land use change for sugarcane expansion in Brazil

Land use change (LUC) alters soil structure and, consequently, the functions and services provided by these soils. Conversion from extensive pasture to sugarcane is one of the largest land transitions in Brazil as a result of the growth of the domestic and global demands of bioenergy. However, the impacts of sugarcane expansion on the soil structure under extensive pasture remains unclear, especially when considering changes at the microscale. We investigated whether LUC for sugarcane cultivation impacted soil microstructure quality. Undisturbed soil samples were taken from two soil layers (0–10 and 10–20 cm) under three contrasting land uses (native vegetation—NV, pasture—PA and sugarcane—SC) in three different locations in the central-southern Brazil. Oriented thin sections (30 μm) were used for micromorphological analysis. The total area of pores decreased following the LUC in the following order: NV > PA > SC in both soil layers. The area of large complex packing pores (>0.01 mm²) also decreased with the LUC sequence: NV>PA>SC. Qualitative and semi-quantitative micromorphological analysis confirmed porosity reduction was driven by the decrease in complex packing pores and that biological features decreased in the same LUC sequence as the quantitative parameters. Therefore, LUC for sugarcane expansion reduced microscale soil porosity, irrespectively of soil type and site-specific conditions, indicating that the adoption of more sustainable management practices is imperative to preserve soil structure and sustain soil functions in Brazilian sugarcane fields.     

Toxic potential of materials at the nanolevel

Nanomaterials are engineered structures with at least one dimension of 100 nanometers or less. These materials are increasingly being used for commercial purposes such as fillers, opacifiers, catalysts, semiconductors, cosmetics, microelectronics, and drug carriers. Materials in this size range may approach the length scale at which some specific physical or chemical interactions with their environment can occur. As a result, their properties differ substantially from those bulk materials of the same composition, allowing them to perform exceptional feats of conductivity, reactivity, and optical sensitivity. Possible undesirable results of these capabilities are harmful interactions with biological systems and the environment, with the potential to generate toxicity. The establishment of principles and test procedures to ensure safe manufacture and use of nanomaterials in the marketplace is urgently required and achievable.     

Determination of cardiac output in neonatal foals by ultrasound velocity dilution and its comparison to the lithium dilution method

Objective – To compare cardiac output (CO) measured by use of lithium dilution (LiDCO) and ultrasound velocity dilution (UDCO) in conditions of high, intermediate, and low CO in anesthetized foals.
Design – Original prospective study.
Setting – University teaching hospital.
Animals – Six foals 1–3 days of age (38–45 kg).
Interventions – Neonatal foals were anesthetized and instrumented to measure direct blood pressure, heart rate, arterial blood gases, and CO. The CO was measured by use of LiDCO and UDCO techniques. Measurements were obtained from each foal at baseline and during low, intermediate, and high CO states. Measurements were converted to cardiac index (cardiac index=CO/body weight) values for statistical analysis. Agreement between the 2 methods was determined using Bland and Altman analysis and concordance correlation coefficients.
Measurements and Main Results – LiDCO determinations of CO ranged between 4.0 and 14.0 L/min resulting in cardiac index ranging between 75.5 and 310 mL/kg/min. There was no significant effect of blood pressure variation on bias or relative bias ( P =0.62 and 0.93, respectively). The mean bias and relative bias of UDCO (±SD) compared with LiDCO were −20.1±39.2 mL/kg/min and −7.7±23.4%, respectively. Concordance correlation coefficient between LiDCO and UDCO was 0.833.
Conclusions – When compared with LiDCO, the UDCO technique has acceptable clinical utility for measuring CO in healthy anesthetized newborn foals.     

Intracardiac foreign body in a dog

A dog that was referred to the University of Florida Veterinary Medical Center was discovered to have a bamboo skewer within the right atrium and right ventricle, traversing the tricuspid valve. The skewer was ingested approximately four months prior to referral and was partially removed via gastrotomy. The presenting complaint at the time of referral included coagulopathy, anemia and leukocytosis. A linear, hyperechoic structure was identified in the right heart during an echocardiogram. The foreign body was suspected to be a portion of the skewer that the patient had previously ingested. Cardiopulmonary bypass was performed and the foreign body was removed successfully. Complications following surgery included the development of tricuspid valve and ventricular wall thrombi, atrial flutter and amiodarone toxicity. Many indications have been described in the veterinary literature for cardiopulmonary bypass. However, to the best of the authors' knowledge, successful removal of an intracardiac foreign body with cardiopulmonary bypass has not been reported in a veterinary patient. This represents a new indication for cardiopulmonary bypass in veterinary medicine.     

鸡传染性支气管炎的控制方法

传染性支气管炎(Infectious Bronchitis,IB)是一个不可忽视的禽病。许多家禽都可感染本病,然而并不是所有的家禽养殖场主或生产者都知道本病的存在。由此可能会诱发其它疾病的爆发,造成一定的经济损失。     

Climatic determinants of lowland rice development

Accurate modelling of plant development is the basis for any assessment of climate change impact on crop yields. Most rice models simulate development (phenology) based on temperature and photoperiod, but often the reliability of these models is reduced beyond the environment they were calibrated for. In our study, we tested the effects of relative air humidity and solar radiation on leaf appearance rate in greenhouse experiments and analysed data sets from field studies conducted in two extremely different rice-growing environments in Nepal and Senegal. We also analysed environmental effects on duration to flowering of one popular IRRI material (IR64) for eight different sites covering the entire temperature range where rice is widely cultivated. Both low relative air humidity and low solar radiation significantly decreased leaf appearance rate. Mean air temperature explained 81% of the variation in duration to flowering across sites, which was furthermore significantly influenced by relative air humidity. Across all sites, a simple linear regression approach including mean air temperature and mean relative humidity in the calculation of duration to flowering led to a root mean square error (RMSE) of 10 days, which was slightly lower than the RMSE of 11 days achieved with an automated calibration tool for parameter optimization of cardinal temperatures and photoperiod sensitivity. Parameter optimization for individual sites led to a much smaller prediction error, but also to large differences in cardinal temperatures between sites, mainly lower optimum temperatures for the cooler sites. To increase the predictive power of phenological models outside their calibration range and especially in climate change scenarios, a more mechanistic modelling approach is needed. A starting point could be including relative air humidity and radiation in the simulation procedure of crop development, and presumably, a closer link between growth and development procedures could help to increase the robustness of phenological models.     

Fungal-based bioherbicides for weed control: a myth or a reality?

The use of bioherbicides containing fungal active ingredients or natural fungal molecules is one of the possible solutions to reduce the use of chemical products. This paper focuses on studies of bioherbicides, including both living fungi and natural fungal molecules, published in the last 45 years, and their associated weed targets; current problems in the development of bioherbicides are also discussed. Bibliometric methods based on the Web of Science database were used to analyse relevant articles published between 1973 and 2018. Overall analysis suggested that interest in bioherbicides extends over the preceding thirty years, when many potential microorganisms and natural fungal molecules were proposed. Furthermore, analysis of about 229 articles indicated an encouraging exploitable potential, although there is a real gap between the number of experimental studies and the small number of products currently on the market. A dozen fungal-based bioherbicides are on the market in the United States and Canada, while countries, such as China and South Africa, have one, and none is available in Europe. The active ingredients in these bioherbicides are living fungi, but no fungal molecule-based product is thus far on the market. Reasons for this gap include production hurdles, formulation process, ecological fitness, duration of herbicidal effects, and costly and time-consuming registration procedures. However, it is clear that analysis of fungus–plant interactions provides a promising source of bioherbicides that may be applied to appropriate cropping systems for environment-friendly, sustainable weed control.