Associations between morphometric variables and weight and yields carcass in Pirapitinga Piaractus brachypomus

The objective of this work was to evaluate the association between morphometric variables and carcass characteristics in Pirapitinga. We used a thousand specimens of Pirapitinga with an average weight of 1,200 g, which were stunned, slaughtered, weighed, measured, and processed for morphometric and processing yield analysis, to obtain weights, carcass and fillet yields. Initially, the linearity of the variables was verified. Pearson's simple and partial correlation tests were performed between all metrics. Track analysis was performed considering the weights and yields of carcass and filet as dependent variables and the others as independent variables. Ridge regression models were used to eliminate the effects of multicollinearity among the independent variables. Observations showed that the simple correlations between body weights and yields were superior to the partial ones in terms of magnitude. The length and circumference of the specimens were the measures most linearly associated with weight, carcass weight and fillet with rib weight. As for carcass yield and fillet yield, linear correlation coefficients were low and not significant when associated with body weights. With the path analysis, we could observe significant positive correlations between the morphometric measurements for weight, carcass weight and fillet with rib weight. The standard length, body circumference and body circumference/body height ratio are the most correlated. The latter are the most important variables in the evaluation of body weights in Pirapitinga fish. They can serve as criteria for indirect selection in searching for fish with better carcass characteristics. As for fillet and carcass yields, the morphometric variables have not shown to be efficient for indirect selection.     

与鱼道设计相关的鱼类游泳行为研究

在鱼类生境遭受破坏,渔业资源日益减少的今天,修建鱼道等过鱼设施已成为减缓水利工程建设所致不利影响的重要举措。纵观世界各国,早期的鱼道建设往往因为缺乏对鱼类的了解而最终成为摆设。我国的鱼道建设起步晚,其再度兴起需要更可靠的生物学信息。鱼类的游泳能力及行为关系着鱼道设计的各个方面,决定着设计的成败。文章针对鱼道设计,综述了国内外几十年来鱼类游泳行为的研究成果。鱼类的游泳速度可分为三类,即持续游泳速度,耐久游泳速度和突进游泳速度,其中与鱼道设计密切相关的是后两者。影响鱼类游泳速度的因素既有生物个体因素也有环境因素,主要包括摆尾频率、体长、疲劳时间、温度及耗氧量等。文章最后简述了鱼类行为学在鱼道设计中的应用。我国针对过鱼设施建设的鱼类行为学研究极少,总结国外的研究方法和经验成果可为我国的过鱼设施建设提供生物学基础,促进该领域的发展。     

The development of the Norwegian wrasse fishery and the use of wrasses as cleaner fish in the salmon aquaculture industry

Norway leads the world aquaculture production of Atlantic salmon Salmo salar and farmed Norwegian Atlantic salmon is currently consumed around the globe. However, sea lice infestation is a major problem faced by the salmon aquaculture industry in Norway and elsewhere. The use of wild-caught cleaner fish, mainly wrasses, has been recommended over the other available methods as the most economical and environmentally friendly option to control sea lice infestation in salmon farming. Here, we review the development of the Norwegian wrasse fishery and the use of wrasses as cleaner fish. In this document, we address the sea lice problem and introduce the main wrasse species employed as cleaner fish, document the cleaning behaviour of wrasses, present the development of a new wrasse fishery associated with the salmon aquaculture industry, and finally, we identify the main challenges associated with the intensive use of wild-caught cleaner wrasses and provide some insight for future directions of the wrasse fishery and further development of aquaculture techniques to supply salmon facilities with domesticated cleaner fish.     

Cannibalism among <Emphasis Type="Italic">Lithodes santolla</Emphasis> (Molina 1782) juveniles: effect of stocking density,stage and molt condition

Losses of king crabs (deaths) in massive rearing conditions are frequently attributed to cannibalism. As several factors could influence cannibalism intensity during culture, the aim of the present study was to determine the effect of molt condition, stage and density on cannibalism among Lithodes santolla juveniles. Comparisons between intermolt and molt conditions and between C1 and C2 stages during intermolt were performed at three densities (6, 12 and 18 individuals per flask; that is equivalent to 236, 472 and 708 individuals m^?2). After 16 days of juvenile coexistence, cannibalism (injured + dead) was higher during molting (33.9 ± 4.5 %) than intermolt (21.7 ± 3.9 %), even though only 36 % of crabs had molted. Although cannibalism was similar in C1 and C2 stages, the proportion of dead animals was higher by a factor of three in C1 stage, probably due to the fact that animals reach the first juvenile stage with low energetic reserves, after the lecithotrophic larval development. Density was the main factor influencing cannibalism in our experiments. Higher densities promoted higher deaths, while agonistic interactions evidenced by injured crabs remained constant. Walking appendages were lost more often than chelipeds during first agonistic encounters. We recommend the use of intermediate densities (450 crabs m^?2 at most), the early detection of exuviae and the sorting of crabs after molting, for L. santolla rearing.     

Thermal preference and tolerance of green abalone Haliotis fulgens (Philippi, 1845) and pink abalone Haliotis corrugata (Gray, 1828)

The thermoregulatory behaviour of green abalone Haliotis fulgens and pink abalone H. corrugata was investigated. Haliotis fulgens juveniles ranging in wet weight from 3.0 to 3.3 g and from 28.7 to 30.5 mm shell length and of H. corrugata 2.0 g and 25.7 mm in shell length were exposed to 19°C for 30 days in a flow‐through water system. Temperature preference was determined in a horizontal thermal gradient and was found to be 25.4°C for green abalone and 25.0°C for pink abalone. Displacement velocity was 4.3 cm h⁻¹ for H. fulgens and 12.8 cm h⁻¹ for H. corrugata. The optimum temperature for growth calculated for both abalone species was 24.6 and 24.5°C respectively. The critical thermal maxima (CTMax) of H. fulgens and H. corrugata were determined as a measure of thermal tolerance. Abalones were subjected to increasing water temperatures at a rate of 1°C on 30 min until they detached from the substrate. The CTMax at 50% were 33.6 and 32.0°C for green and pink abalone respectively. The results are discussed in relation to site selection and commercial rearing.     

Upscaling as ecological information transfer: a simple framework with application to Arctic ecosystem carbon exchange

Transferring ecological information across scale often involves spatial aggregation, which alters information content and may bias estimates if the scaling process is nonlinear. Here, a potential solution, the preservation of the information content of fine-scale measurements, is highlighted using modeled net ecosystem exchange (NEE) of an Arctic tundra landscape as an example. The variance of aggregated normalized difference vegetation index (NDVI), measured from an airborne platform, decreased linearly with log(scale), resulting in a linear relationship between log(scale) and the scale-wise modeled NEE estimate. Preserving three units of information, the mean, variance and skewness of fine-scale NDVI observations, resulted in upscaled NEE estimates that deviated less than 4% from the fine-scale estimate. Preserving only the mean and variance resulted in nearly 23% NEE bias, and preserving only the mean resulted in larger error and a change in sign from CO₂ sink to source. Compressing NDVI maps by 70–75% using wavelet thresholding with the Haar and Coiflet basis functions resulted in 13% NEE bias across the study domain. Applying unique scale-dependent transfer functions between NDVI and leaf area index (LAI) decreased, but did not remove, bias in modeled flux in a smaller expanse using handheld NDVI observations. Quantifying the parameters of statistical distributions to preserve ecological information reduces bias when upscaling and makes possible spatial data assimilation to further reduce errors in estimates of ecological processes across scale.     

Response of gladiolus (Gladiolus spp) plants after exposure corms to chitosan and hot water treatments

The state of Morelos, Mexico has gradually become an important producer of gladiolus. Some preconditioning treatments of corms are empirically done causing uneven emergence and low quality of flowers. In this investigation, before planting, gladiolus corms var. ‘Blanca Borrego’ were dipped in chitosan (chitosan reagent and commercial chitosan Biorend^®), in hot water at various temperatures and in treatments combined with Biorend^® at 1.5% and hot water. Results indicated that the most influenced variables were corm germination, number of flowers per spike, number of cormlets and vase life. Overall, the commercial product Biorend^® at 1.5% accelerated corm emergence in approximately 4 days, the number of flowers increased by 2–7 and the vase life extended for 3 days. The number of cormlets was also duplicated. Corms dipped in the commercial chitosan Biorend^® at 1.5% at different intervals of time were not greatly affected except for the emergence and number of cormlets. However, for this experiment there were significant effects on the number of leaves and flowers because of the interactions between chitosan and the immersion time. The temperature of 55 °C affected plant development because emergence was delayed by 6 days; and there were less number of leaves, flowers and cormlets. On the other hand, the incidence of Fusarium oxysporum in naturally infected corms was 0% at temperatures of 55 °C and 50 °C. Immersion times (0, 10, 15 and 20 min) in hot water at 50 °C did not show significant effects on plant development and vase life. Corms dipped in Biorend^® at 1.5% and hot water at 50 °C accelerated their emergence for about 1–7 days, the number of flowers increased by two, extended the storage life for 1–3 days and increased the number of cormlets. The integration of these two treatments -Biorend^® and hot water- might be a good option for increasing the gladiolus plant quality and vase life.     

Evaluation of tangerine hybrid resistance to Alternaria alternata

The Alternaria Brown Spot, caused by Alternaria alternata, is a major fungal disease in some kinds of tangerines, tangor, mandarins and pomelos. In Brazil as well as worldwide, A. alternata can cause necrosis in fruits, branches and leaves, causing substantial profit loss. In the present research, in laboratory conditions and in the field, we evaluated the resistance to the fungus, in leaves and fruits, for 22 varieties and hybrids of tangerines. To this end, we evaluated genotypes belonging to the Germplasm Bank of the Estação Experimental de Citricultura de Bebedouro. The resistant genetic materials (found in leaves and fruits) represented four varieties of clementines (Citrus clementina); six varieties of mandarins (two belonging to C. reticulata, two to C. tangerina, one to C. deliciosa and one to C. nobilis); one tangelo (C. tangerina × C. paradisi); two mandarin hybrids (one resulting from crossing C. nobilis × C. deliciosa and the other from crossing C. clementina × C. reticulata); one tangor hybrid (C. clementina) and two satsuma hybrids (C. unshiu × C. deliciosa). We also determined a relation between the inoculation of leaves and fruits. The resistance and susceptibility following inoculation in leaves and fruits supports a relationship between these organs and the physiological responses observed for the evaluated genotypes.