Induction of superoxide dismutase,malate dehydrogenase and phenylalanine ammonia-lyase during enhancing resistance of common bean against Xanthomonas axonopodis pv. phaseoli by exogenous salicylic acid

Journal of Plant Diseases and Protection - Bacterial blight of common bean caused by Xanthomonas axonopodis pv. phaseoli (Xap) is one of the most devastating diseases and causes serious yield...     

Genetic analysis of resistance to Pyrenophora tritici-repentis races 1 and 5 in tetraploid and hexaploid wheat

Tan spot of wheat, caused by the fungus Pyrenophora tritici-repentis, is a destructive disease worldwide that can lead to serious losses in quality and quantity of wheat grain production. Resistance to multiple races of P. tritici-repentis was identified in a wide range of genetically diverse genotypes, including three different species Triticum aestivum (AABBDD), T. spelta (AABBDD), and T. turgidum (AABB). The major objectives of this study were to determine the genetic control of resistance to P. tritici-repentis races 1 and 5 in 12 newly identified sources of resistance. The parents, F(1), F(2), and F(2:3) or F(2:5) families of each cross were analyzed for the allelism tests and/or inheritance studies. Plants were inoculated at the two-leaf stage under controlled environmental conditions and disease reaction was assessed based on lesion-type rating scale. A single recessive gene controlled resistance to necrosis caused by P. tritici-repentis race 1 in both tetraploid and hexaploid resistant genotypes. The lack of segregation in the inter- and intra-specific crosses between the resistant tetraploid and hexaploid genotypes indicated that they possess the same genes for resistance to tan necrosis and chlorosis induced by P. tritici-repentis race 1. A single dominant gene for chlorosis in hexaploid wheat and a single recessive gene for necrosis in tetraploid wheat, controlled resistance to P. tritici-repentis race 5.     

Genetic resistance to bacterial blight disease in Persian walnut

Bacterial blight disease of Persian walnut (Juglans regia, L.), caused by Xanthomonas arboricola pv. juglandis (Xaj), leads to significant nut losses in northern, central and western areas of Iran. To identify the natural sources of resistance to disease in the endemic walnut genotypes of Iran, sixteen walnut genotypes, collected from different areas of Hamedan province, were inoculated with Xaj in a randomized complete block design with five replicates for each genotype. Two-year old genotypes were gently sprayed with a suspension of bacteria adjusted to approximately 2 × 10⁹ cfu ml⁻¹ of distilled water in May. Infected leaves were rated for disease 28 and 42 days after inoculation, using a 0 to 5 severity scale, based on the number, size and distribution of lesions on the leaves. Data analyses showed that there were variations among genotypes in response to pathogen. Upon inoculation by bacterial suspension genotype 94 showed the highest resistance to both disease incidence and its progress after 4–6 weeks of infection. Genotype 65 showed high susceptibility to disease and genotype 69 showed high susceptibilities both to disease incidence and its progress after 4–6 weeks of infection.     

The true nature of Ganoderma in Iran: Taxonomy based on ITS and mtSSU rDNA

The genus Ganoderma Karst. has broad‐spectrum usage in biotechnology, medicine and the food industry. The complexity of the morphology within species has led to uncertain identification in the past, but recent advancements in molecular identification methods have provided scientists with the opportunity to better understand the taxonomy of the species. The present study attempts for the first time to elucidate the distinctiveness of the Ganoderma species growing in Iran concerning those elsewhere in the world based on mitochondrial small subunit ribosomal DNA (mtSSU rDNA) and internal transcribed spacer (ITS) sequence data. The results disclosed that the G. lucidum Karst. samples collected in Iran are more similar to the European Ganoderma species than to the Asian (Chinese) one used in this study.     

Assessing Allelopathic Index for Estimating Allelopathic potential of Ajowan Extracts

Allelopathy is a procedure in which secondary metabolites are produced by plants. Some plants may beneficially or antagonistically affect other plants through allelochemical compounds which may be released directly or indirectly from live or dead parts and cause allelopathic and phytotoxic effects. The aim of the present study was to investigate the allelopathic possibility of ajowan (Carum copticum) extracts in different concentrations on morphological indices (germination and growth) of wheat (Triticum sativum), barley (Hurdeum vulgare), corn (Zea maize S.C 704), and safflower (Carthamus tinctorius L.) seedlings as proceeding crops and to develop a comprehensive formula for measuring the negative and positive effects of allelochemicals on growth indices such as shoot and root length, as well as the germination percentage on donor plants. It was demonstrated that increasing concentrations of ajowan extracts significantly decreased the Allelopathic Index, percent of germination, and other growth related indices of all seedlings. Based on the proposed Allelopathic Index of experimental plants, it was revealed that ajowan has posed a higher risk to corn and barley especially at the early stages of the growing cycle, while safflower and wheat indicated more tolerance to growth inhibition effects of ajowan in rotational sequence.     

Genetic variability of heat tolerance, and its effect on yield and fibre quality traits in upland cotton (Gossypium hirsutum L.)

Global temperature is rising because of increasing concentrations of CO₂ and other greenhouse gases (e.g. methane, nitrous oxide, etc.) in the atmosphere because of the excessive use of fossil fuels. High temperature causes heat stress which reduces crop productivity. The development of heat-tolerant varieties is feasible and will help mitigate the effects of climate change. Fifty-one cotton accessions were screened in heat-stressed and non-stressed conditions in the glasshouse and field. Relative cell injury percentage (RCI %), a measure of cell membrane thermostability (CMT), was used to assess heat tolerance. Heat-tolerant accessions had more stable yield and yielded more seed cotton with better quality fibre than the heat-intolerant accessions across four environments. The responses of the 51 accessions to all four environments for the measured traits were strongly associated. RCI % of the accessions and hybrids was strongly and negatively associated with yield and fibre traits. CMT was concluded to be a useful technique for identification of heat-tolerant cotton.     

Race specific resistance against Phytophthora infestans in potato is controlled by more genetic factors than only R-genes

Summary For RFLP mapping of R-genes, determining resistance to specific races of Phytophthora infestans in tetraploid potato, it is necessary to develop well segregating populations at the 2x level. During mapping studies, evidence was obtained that more genetic factor(s) are involved in the expression of R-genes than conventionally believed. Two experiments are described in which such an additional genetic factor was suppressing or enhancing the expression of unknown R _nand R _ifactors. R _nand R _iappeared to be present in the investigated plant material, containing R4 and R10, or in one of the susceptible crossing parents. In a third experiment, the expression and the segregation of the well known R1 gene was influenced by an additional genetic factor. In that case there were indications for a dominant suppressor. This was established by the selection of susceptible plants carrying a RFLP allele of probe GP21 closely linked to R1. In three of the four F₁ populations, resulting from crosses between such susceptible plants and susceptible tester plants, resistnat progenies were found. The resistance appeared to be R1-specific. This clearly indicates that in three of the four investigated susceptible plants, the R1 gene was still present but not expressed.     

塔里木盆地多种沙源类型沙通量异变特征研究

以塔里木盆地周边地区多种沙尘源地为研究区,通过塔中、肖塘、若羌、策勒四个风沙观测场获取的沙尘暴过程中贴地层风向、风速数据以及风蚀传感器实测的撞击颗粒数等数据计算出各地起沙临界摩擦速度,利用Gillette经典的垂直沙尘通量及Lettau水平沙尘通量公式对若羌、策勒、塔中、肖塘沙尘通量进行了估算,并通过各层实测的梯度风速作为背景值界定出塔里木盆地多种沙源类型沙通量变化比对特征,结果表明:垂直沙尘通量F量级为10-8kg/(m2.s),水平沙尘通量Q量级为10-4 kg/(m.s);风速相同情况下,F若羌最大,策勒次之,塔中、肖塘较小;Q若羌值最大,策勒次之,塔中第三,肖塘最小。垂直沙通量F与风速都表现出较好的线性相关,风速递增,垂直沙通量递增;风速递减,垂直沙通量递减。在风速递增幅度相同条件下,若羌Q值递增幅度最大,策勒次之,塔中、肖塘基本相同。     

能源植物斑茅在不同生长时期的产量与组分变化

研究不同时期斑茅产量及其化学组分的变化。结果表明:斑茅生物质产量在11月达到最高,其后开始下降;整个生长发育过程中茎叶生物质产量比呈现上升趋势;含水量随生长发育的进行显著降低;叶片灰分含量全年最低为5月,从10月份开始显著增加,至12月份达到最高。茎秆灰分含量略低于叶片,全年最低为10月,最高为7月,变化幅度不大。叶片中木质素含量全年由高到低排列顺序为12月11月9月10月7月8月6月;茎秆中木质素含量全年由高到低排列顺序为12月11月9月7月8月10月6月。10月份茎秆含水量低,灰分含量最低,热值较高,结合产量和燃料品质考虑其更适于直接燃烧,而9月份叶片则更加适于作为生物转化的材料。     

Wicking properties of polyamide 66 twisted nanofiber yarn by tracing the color alteration in yarn structure

In view of the interest in wicking properties of these flexible structures, analysis of the wicking phenomena in nylon 6.6 nanofiber yarns is carried out by considering the twist rate effects. A novel method is used based on adding a pH-sensitive dye to yarn interstructure and the analysis of color alteration of nanofiber yarn structure, resulting from a shift in pH, during the capillary rise of distilled water. The results show that the addition of pH- sensitive dye has no influence on the average nanofiber diameter and the wicking behavior of yarns. This study shows that in short durations, the kinetic of the capillary rise follows the Lucas-Washburn equation. The Lambertw, a mathematical function, has been incorporated, which helps measure an equivalent structural factor of nanofiber yarns and vertical wicking height at any given time considering the gravitational effects. The statistical results show that the average of equilibrium wicking height and capillary rise rate coefficient tend to decrease with increasing the nanofiber yarn twist, due to the reduction of continuity and size of capillaries.