Stand structure,phenology and litterfall dynamics of a subtropical mangrove <Emphasis Type="Italic">Bruguiera gymnorrhiza</Emphasis>

We evaluated the phenology and litterfall dynamics of the mangrove Bruguiera gymnorrhiza (L.) Lamk along the Okukubi River, Okinawa Island, Japan. Over 3 years, this species showed the highest litterfall of leaves and stipules in summer and the lowest litterfall in winter. From Kendall’s coefficient of concordance, the monthly changes in leaf, stipule, and branch were strongly and significantly concordant among years. Leaf and stipule litterfall could be governed by monthly maximum wind speed, monthly day length, and monthly mean air temperature. Branch litterfall depended on monthly maximum wind speed and monthly rainfall, and increased exponentially with increasing monthly maximum wind speed. Mean total litterfall was 11.8 Mg ha^?1 yr^?1, with the largest component being leaf litterfall (65.8 %). Annual leaf litterfall per plot was almost constant regardless of the tree density of the plot. Mean leaf longevity was 18 months. Flower and mature propagule litterfall might be influenced by monthly mean air temperature, monthly day length and monthly mean air temperature. The average development periods from flower buds to flowers and flower buds to mature propagules were 1 and 8 months, respectively. Except for leaf and branch, all vegetative and reproductive organ litterfall had clear annual cycles. B. gymnorrhiza showed a positive correlation between leaf production and reproductive organ production.     

Influence of the melamine content in melamine-urea-formaldehyde resins on formaldehyde emission and cured resin structure

The effect of melamine content in melamine-urea-formaldehyde (MUF) resins on the formaldehyde emission and resin structure was investigated using six MUF resins synthesized with different F/(M + U) and M/U molar ratios. The formaldehyde emission from the plywood decreased as the F/(M + U) molar ratio decreased and the M/ U molar ratio increased. In addition, the bond performance was enhanced as the M/U molar ratio increased in the MUF resins with a fixed F/(M + U) molar ratio. Quantitative solution¹³C-NMR spectra of MUF resins revealed that the MUF resins with a high melamine content consisted of more highly branched crosslinkage structure and free melamine compared to the resins with low melamine contents. Furthermore, solid-state¹³C CP-MAS NMR spectra of cured MUF resins proved that more methylol groups, dimethylene ether, and branched methylene structures were present in the MUF resins with a higher F/(M + U) molar ratio, leading to increased bond strength and formaldehyde emission. There is no significant difference in the linkage structure of the cured resins with the same F/(M + U) and different M/U molar ratios except the ratios of carbonyl carbon of urea and triazine carbon of melamine. Therefore, the lower formaldehyde emission from cured MUF resins with a higher M/U molar ratio might be ascribed to the stronger linkages between triazine carbons of melamine than those of urea carbons. Consequently, the melamine contributed to strong crosslinking linkages in the cured resin structures, leading to lower formaldehyde emission and better bond performance.Part of this work was presented at the 48th Annual Meeting of the Japan Wood Research Society, Shizuoka, April 1998     

Influences of moisture content on the catalysis of sulfur dioxide and attainable properties in a vapor-phase treatment of wood with formaldehyde

Influences of moisture content on the catalysis of sulfur dioxide and physical properties of reaction products were examined for a vapor-phase treatment of spruce wood with formaldehyde. The reaction rate was strongly dependent on the amounts of water and sulfur dioxide in the reaction system, and this was consistent with a proposal that the hydroxymethylsulfonic acid (HOCH₂SO₃H) formed from sulfur dioxide, water, and formaldehyde acts as a catalyst for the reaction. However, not all water molecules contributed to the formation of HOCH₂SO₃H, because some were adsorbed by the wood components. When the initial moisture content was high, polymeric cross-linking was likely because the ultimate weight gain was much greater than the value estimated based on monomeric cross-links. The lower values of antiswelling efficiency and higher equilibrium moisture content at a specific level of weight gain also suggested the existence of polymeric cross-links. However, the difference in the length of cross-links did not significantly influence the mechanical properties.Part of this research was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, April 2003     

Lateral resistance of anchor-bolt joints between timber sills and foundations II. Effective lateral resistance of multiple anchor-bolt joints

Monte Carlo simulations were conducted to estimate the effective lateral resistance of multiple anchor-bolt joints with ordinary specifications of Japanese post and beam constructions. Basic lateral load-slip curves of single anchor-bolt joints required in the simulations were determined from the test results of our earlier report. The effective lateral resistance of multiple anchor-bolt joints was estimated for some combinations of loading direction, length/diameter ratio of anchor bolts, lead-hole clearance, and number of anchor bolts. The principal results of the simulations are: (1) anchor-bolt joints loaded perpendicular to lateral forces are not recommended to be counted as supplementary resisting elements because their supplementary shares are far less than those expected from their allowable lateral resistance; (2) multiple anchor-bolt joints with small length/diameter ratios have comparatively lower effective resistance ratios than multiple anchor-bolt joints with large length/diameter ratios; (3) the effective resistance of multiple anchor-bolt joints is affected not only by lead-hole clearance or number of bolts but also variance of load-slip characteristics of single anchor-bolt joints. Part of this work was presented at WCTE2004, Lahti, June 2004     

Growth and transpiration of Japanese cedar (Cryptomeria japonica) and Hinoki cypress (Chamaecyparis obtusa) seedlings in response to soil water content

To investigate the effects of soil water content on growth and transpiration of Japanese cedar (Cryptomeria japonica D. Don) and Hinoki cypress (Chamaecyparis obtusa (Siebold et Zucc.) Endl.), potted seedlings were grown in well-watered soil (wet treatment) or in drying soil (dry treatment) for 12 weeks. Seedlings in the wet treatment were watered once every 2 or 3 days, whereas seedlings in the dry treatment were watered when soil water content (Theta; m3 m(-3)) reached 0.30, equivalent to a soil matric potential of -0.06 MPa. From Weeks 7 to 12 after the onset of the treatments, seedling transpiration was measured by weighing the potted seedlings. After the last watering, changes in transpiration rate during soil drying were monitored intensely. The dry treatment restricted aboveground growth but increased biomass allocation to the roots in both species, resulting in no significant treatment difference in whole-plant biomass production. The species showed similar responses in relative growth rate (RGR), net assimilation rate (NAR) and shoot mass ratio (SMR) to the dry treatment. Although NAR did not change significantly in either C. japonica or C. obtusa as the soil dried, the two species responded differently to the dry treatment in terms of mean transpiration rate (E) and water-use efficiency (WUE), which are parameters that relate to NAR. In the dry treatment, both E and WUE of C. japonica were stable, whereas in C. obtusa, E decreased and WUE increased (E and WUE counterbalanced to maintain a constant NAR). Transpiration rates were lower in C. obtusa seedlings than in C. japonica seedlings, even in well-watered conditions. During soil drying, the transpiration rate decreased after Theta reached about 0.38 (-0.003 MPa) in C. obtusa and 0.32 (-0.028 MPa) in C. japonica. We conclude that C. obtusa has more water-saving characteristics than C. japonica, particularly when water supply is limited.     

Growth analysis on the competition–density effect in Chinese fir (Cunninghamia lanceolata) and Masson pine (Pinus massoniana) stands

The competition–density (C–D) effect for Chinese fir (Cunninghamia lanceolata (Lamb.) Hook.) and Masson pine (Pinus massoniana Lamb.) stands was analyzed using the reciprocal equation of the C–D effect, i.e. 1/w=Aρ+B, where w and ρ, respectively, represent mean stem volume and stand density. The C–D curve, which is given by the reciprocal equation on logarithmic coordinates, shifted upward with the progress of time. The coefficients A and B included in the reciprocal equation were calculated at each growth stage. The biological time τ defined as the integral of λ(t), the coefficient of growth in the general logistic growth curve, with respect to physical time t, tended to increase to an asymptote with increasing t. With increasing τ, the coefficient A, the reciprocal of which means the asymptote of yield (=wρ), increased abruptly up to a maximum value and then tended to decrease gradually to a constant level. On the other hand, the coefficient B, the reciprocal of which means the asymptote of mean stem volume, decreased exponentially and tended to close to zero with increasing τ. The λ(t) decreased with increasing stand age, whereas the final yield Y(t) defined as W(t) ρ, where W(t) is the asymptote of w in the general logistic growth curve, tended to increase gradually with increasing stand age.     

Self-thinning in prince Rupprecht's larch (Larix principis-rupprechtii Mayr) stands

Prince Rupprecht's larch (Larix principis-rupprechtii Mayr) stands growing at three different densities were investigated to determine characteristics of self-thinning. Tree density decreased with increasing stand age, and the higher density stand had higher mortality than the lower one. Mean stem volume increased with increasing stand age, and the higher density stand had higher relative growth rate of mean stem volume than the lower one. Mean stem volume (ν) increased with decreasing tree density (ρ), resulting in self-thinning line being expressed as ln ν=lnK-α ln ρ, whereK and α are coefficients. The slope of self-thinning line, —α, over the whole study period for all sites was similar with a mean value of —2.13. The ν-ρ trajectories before reaching the self-thinning slope of—3/2 could be described by Tadaki's model. The phase self-thinning line tended to decrease toward a slope of—3/2 with increasing stand age, which trends agreed with those of the published data of aPinus strobus stand andP. densiflora stands.     

A model for the relationship between form-factors for stem volume and those for stem surface area in coniferous species

A model that describes the relationship between the form-factors for stem volume and those for stem surface area in coniferous species is proposed. The model is derived assuming that the stem form of a tree can be expressed by Kunze's equation. The model indicated that the form-factor for stem surface area was directly proportional to the square root of the form-factor for stem surface volume, independent of the stem position. The proposed model expressed the relationship of the form-factors for Japanese cedar (Cryptomeria japonica D. Don) and Japanese cypress (Chamaecyparis obtusa Endl.) trees well. Therefore, the form-factors for stem surface area could be estimated from those for stem volume. No significant difference in the coefficient was found between Japanese cedar and Japanese cypress trees, indicating that the proportional coefficient would be common between the two species. Many studies have shown that the form-factors for stem volume at 0.7 and 0.5 in relative height were, respectively, almost steady at 0.7 and 1.0, independent of species, district, density control, and growth stage. Substituting these universal values into the proposed model, the form-factors for stem surface area at 0.7 and 0.5 in relative height were estimated to be 0.730 and 0.873, respectively. The estimated values of the form-factors for stem surface area would be universal for coniferous species. The proposed model also showed that the breast height form-factor for stem surface area decreased sharply with the increase in total tree height, when the height was less than 10 m. However, after the tree attained the total height of 10 m, the breast height form-factor gradually decreased with the total tree height approaching its asymptotic value of 0.605. In conclusion, the model proposed here can be used to describe the relationship between form-factors for stem volume and those for stem surface area successfully.     

Growth and wood quality of sugi (Cryptomeria japonica) planted in Akita prefecture (II). Juvenile/mature wood determination of aged trees

Variations of certain anatomical and mechanical indices within tree stems of aged sugi (Cryptomeria japonica) trees planted in Akita prefecture were studied. The determination of the juvenile/mature wood boundary was also discussed, and the effects of wood structure on mechanical properties were investigated. On the basis of radial and vertical variation of the anatomical and mechanical indices, modulus of elasticity (MOE)/ shear modulus (G) was chosen as the index for determining the juvenile/mature wood boundary. The increase rates of MOE/G at the points of 1%, 2%, and 3% were discussed. It was found that for aged trees, all three points were thought to be effective for dividing juvenile and mature wood. However, for younger trees, the point of 2% was recommended, which was mostly consistent with the result obtained by the increase rate of 1% for tracheid length (TL). Among mechanical properties, the MOE showed more significant juvenile/mature wood differences than did modulus of rupture (MOR) and . By correlation analysis, it was suggested that microfibril angle largely contributed to the indices of MOE and G, and specific gravity largely contributed to the indices of MOR and .Part of this report was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, March 2003     

Ploidy assessment of porcine haploid and diploid parthenogenetic embryos by fluorescent in situ hybridization detecting a chromosome 1-specific sequence, Sus scrofa Mc1 satellite DNA

The aim of the present study was to examine the feasibility of fluorescent in situ hybridization (FISH) for detecting a chromosome 1-specific sequence as a means of assessing the ploidy of porcine parthenotes. In vitro-matured oocytes with the first polar body (PB) were electrically activated; some were treated with cytochalasin B to prevent second PB extrusion (1PB embryos), and the others extruded the second PB (2PB embryos). At the 2-cell stage, one and two FISH signals were detected in each nucleus of 2PB and 1PB embryos, respectively. Almost all cells of blastocysts derived from 1PB embryos retained two signals. In contrast, cells of blastocysts derived from 2PB embryos had two signals. These data demonstrate that FISH analysis allows precise ploidy assessment of porcine parthenogenetic embryos, hence providing a practical means of detecting ploidy transition during parthenogenetic embryogenesis.