Responses of Batis maritima plants challenged with up to two‐fold seawater NaCl salinity

Batis maritima is a promising halophyte for sand‐dune stabilization and saline‐soil reclamation. This species has also applications in herbal medicine and as an oilseed crop. Here, we address the plant response to salinity reaching up to two‐fold seawater concentration (0–1000 mM NaCl), with a particular emphasis on growth, water status, mineral nutrition, proline content, and photosystem II integrity. Plant biomass production was maximal at 200 mM NaCl, and the plants survived even when challenged with 1000 mM NaCl. Plant water status was not impaired by the high accumulation of sodium in shoots, suggesting that Na⁺ compartmentalization efficiently took place in vacuoles. Concentrations of Mg²⁺ and K⁺ in shoots were markedly lower in salt‐treated plants, while that of Ca²⁺ was less affected. Soluble‐sugar and chlorophyll concentrations were hardly affected by salinity, whereas proline concentration increased significantly in shoots of salt‐treated plants. Maximum quantum efficiency (F_v/F_m), quantum yield of PSII (Φ_PSII), and electron‐transport rate (ETR) were maximal at 200–300 mM NaCl. Both nonphotochemical quenching (NPQ) and photochemical quenching (qP) were salt‐independent. Interestingly, transferring the plants previously challenged with supraoptimal salinities (400–1000 mM NaCl) to the optimal salinity (200 mM NaCl) substantially restored their growth activity. Altogether, our results indicate that B. maritima is an obligate halophyte, requiring high salt concentrations for optimal growth, and surviving long‐term extreme salinity. Such a performance could be ascribed to the plant capability to use sodium for osmotic adjustment, selective absorption of K⁺ over Na⁺ in concomitance with the stability of PSII functioning, and the absence of photosynthetic pigment degradation.     

Chemically Modified Crop Residues as a Low-Cost Technique for the Removal of Heavy Metal Ions from Wastewater

Batch adsorption experiments were carried out to evaluate the effect of type of crop residues and chemical pretreatment solutions on the removal efficiency of heavy metal ions at different concentrations of synthetic wastewater solutions. Rice straw, cotton stalks, and maize stalks were pretreated with different solutions (i.e., sulfuric acid, oxalic acid, sodium hydroxide, and distilled water as the control treatment) in order to increase their metal-binding capacity. Results indicated that cotton stalks were the best biosorbent material according to their efficiency in removal of heavy metal ions. Sodium hydroxide was the best chemical pretreatment method for stimulating the biosorption capacity of crop residues. Ions of Pb²⁺ had the highest biosorption ratio among all competitive ions, whereas Mn²⁺ ions had the lowest. The removal efficiency decreased as the concentration of heavy metal ions increased in aqueous solutions. Sorption equilibrium isotherms could be described by the Langmuir model in most cases, whereas an isotherm of S shape was observed in other cases, which did not follow the Langmuir isotherm model. In conclusion, cotton stalks pretreated with sodium hydroxide could be used as an efficient technique for wastewater remediation prior to irrigation due to its low-cost, little processing, and high biosorption capacity.     

Assessment of genetic divergence in salt tolerance of soybean (<Emphasis Type="Italic">Glycine max</Emphasis> L.) genotypes

A large number of soybean (Glycine max L.) genotypes of diverse growth habit and adaptive characters were used in the experiment. Soil salinity-induced changes in nine morpho-physiological characters of 30-day-old seedlings of 170 soybean genotypes were compared in the study. The first and second principal components (PC) of principal component analysis (PCA) results accounted for 97 and 2.5%, respectively, of the total variations of soybean genotypes. The variation for the first PC was composed mainly of relative total dry weight (DW), relative shoot dry weight, as well as petiole dry weight. There were four clusters distinguished in the cluster analysis. The genotypes in cluster IV performed better in respect to relative total dry weight and relative shoot dry weight and hence having salt tolerance. The genotypes clusters III performed very poorly and those of clusters II and I were moderate to poor. D2 analysis indicated that the clusters differed significantly from each other. Discriminant function analysis (DFA) again asserts strongly that more than 92% of the genotypes were correctly assigned to clusters. Both PCA and DFA confirmed that the relative total DW followed by shoot and petiole DW were the major discriminatory variables, and the root DW were the secondary important variables to distinguish genotypes into groups. In this study, multivariate analyses were used in identifying the soybean genotypes of desirable traits for salt tolerance.     

The Cytological Status of Plants Regenerated from Shoot-Meristem Culture of Pisum sativum L

The cytological status of plantlets regenerated from shoot apical meristems of Pisum sativum was investigated. Chromosome counts in root apices of in vitro regenerated plants showed a preponderance of diploid cells. Moreover, the karyotypes of root-tips from plants derived from culture and from normal plants were basically the same. Topics such as the treatment of chromosomal armlength data, simple statistical comparison of samples derived from normal and regenerated plants are discussed.     

Comparison of leaf and pod disease reactions of beans (Phaseolus vulgaris L.) inoculated by different methods with strains of Xanthomonas campestris pv. Phaseoli (Smith) dye

Summary Common blight disease in beans (Phaseolus vulgaris), caused by the bacterium Xanthomonas campestris pv. phaseoli, reduces crop yield and seed quality. Information is needed on the variation of leaves and pods disease reaction to strains of the bacterium after different inoculation methods. Phaseolus vulgaris cultivars Red Kidney Charlevoix, GN Harris, GN 1140, and GN Emerson were inoculated with three different strains of Xanthomonas campestris pv. phaseoli at two inoculum concentrations (10⁸ and 10⁶ bacterial cells/ml) using water soaking, multiple needle, and razor blade inoculation on leaves, and razor blade scratch, dissecting needle, and razor blade cut inoculation on pods. Differential cultivar disease reactions of leaves, pods, or both to the bacterial strains were observed in some cases. Significant interactions among cultivars, inoculation methods, strains, and inoculum concentrations (leaves) were found. A rapid leaf chlorosis developed 6 to 7 days after inoculation. Strains of bacteria did not show specificity in inducing this reaction, but rapid leaf chlorosis was associated with high inoculum concentration and with the water soaking and multiple needle methods. Another experiment was conducted to count the number of living bacterial cells deposited in the leaf tissue after inoculation by different methods. The number of bacteria deposited by water soaking or multiple needle was higher than that deposited by razor blade.Published as Paper No. 8584, Journal Series, Nebraska Agricultural Experiment Station. Research was conducted under Project No. 20–36.     

Labor- und Freilandversuche zur Bekämpfung von vier Blattlausarten mit zwei synthetischen Juvenilhormon-Analogen

Laboratory and field trials with two synthetic Juvenil Hormone Analogues on four Aphid species Two juvenile hormone analogues (JHA) were applied in laboratory in three different concentrations to four aphid species. Mortality-concentrations and mortality-time for the lowest concentration were plotted on logprobit paper and the slope calculated from the eye fitted lines. The results indicated the feasibility of probit analysis for concentration-mortality or time mortality responses. However in one of the aphid species i. e.Aphis gossypii, there was a lack of linearity in the relationship, this species proved to be tolerant to JHA in field trials. Both JHA supressed progeny production, the supression was found to be selective to different species. In field trials both JHA brought about appreciable reductions in the populations with the exception ofAphis gossypii. The colour ofH. arundinis was found to differ in adults insuing from treated nymphs, otherwise no remarkable morphonogenic changes were observed.     

Agroforestry: a viable land use of alkali soils

A system of land use of alkaline wastelands of the Indo-Gangetic plain has been proposed consisting of planting Prosopis juliflora, a multi-purpose tree species, with the objectives of economic return as well as soil amelioration. Tree farming onalkaline wastelands provides not only fuel, fodder, timber and income to the rural population but also shows good effects in improving the soil characteristics. The detailed costs of such an agroforestry system on alkali soils have been worked out and the mean annual production of Prosopis juliflora on soils of different pH have been analysed. In spite of the high cost of establishing a plantation, an economic analysis of the system yields a 9.5% internal rate of return which is reasonably high for degraded lands of strongly alkali soils and also viable within the economic structure of the region.     

Distribution of preservatives in thermally modified Scots pine and Norway spruce sapwood

Studying the impregnation and distribution of oil-based preservative in dried wood is complicated as wood is a nonhomogeneous, hygroscopic and porous material, and especially of anisotropic nature. However, this study is important since it has influence on the durability of wood. To enhance the durability of thermally modified wood, a new method for preservative impregnation is introduced, avoiding the need for external pressure or vacuum. This article presents a study on preservative distribution in thermally treated Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) sapwood using computed tomography scanning, light microscopy, and scanning electron microscopy. Secondary treatment of thermally modified wood was performed on a laboratory scale by impregnation with two types of preservatives, viz. Elit Träskydd (Beckers) and pine tar (tar), to evaluate their distribution in the wood cells. Preservative solutions were impregnated in the wood using a simple and effective method. Samples were preheated to 170 °C in a drying oven and immediately submerged in preservative solutions for simultaneous impregnation and cooling. Tar penetration was found higher than Beckers, and their distribution decreased with increasing sample length. Owing to some anatomical properties, uptake of preservatives was low in spruce. Besides, dry-induced interstitial spaces, which are proven important flow paths for seasoned wood, were not observed in this species.     

Explosion pulping of eucalyptus: a comparison with CTMP and CMP

Summary Explosion pulping results in strong pulp with breaking length at 100 ml CSF (Canadian standard freeness) higher than 6.5 kg and burst index approaching 4 KPa m²/g. The real advantage of eucalyptus explosion pulp over conventional CMP (chemical-mechanical pulp) and CTMP (chemical-thermo-mechanical pulp) is observed when the impregnation solution contains less than 2% NaOH along with 8% Na₂SO₃, and when the liquor/chips ratio equals 3. The strength of eucalyptus explosion pulp obtained by using a pretreatment solution consisting of 8% Na₂SO₃ and 1% NaOH is comparable with that of eucalyptus kraft pulp. The concentration of NaOH present in the pretreatment solution has a very important effect on the specific refining energy of eucalyptus explosion pulp as well as of CMP and CTMP. The explosion pulp obtained from eucalyptus pretreated with a solution containing an appropriate quantity of caustic along with Na₂SO₃ not only requires a minimum specific refining energy but also provides the highest strength values in comparison to that of CMP and CTMP.