Comparison of estimates of hip dysplasia genetic parameters in Estrela Mountain Dog using linear and threshold models

Genetic parameters, breeding values, and genetic trends of hip dysplasia in Estrela Mountain Dogs were estimated using a linear model (LM) and a threshold model (TM). A database with 313 animals was used. Right and left hip joints were individually scored, according to the Fédération Cynologic Internationale grading rules of the canine hip dysplasia system, as normal (1), borderline (2), slight (3), moderate (4), and severe (5 and 6). The estimate of repeatability was lower in LM (0.86) than in TM (0.90). The same tendency was verified with the heritability because its estimate in LM was 0.38 and in TM was 0.43. However, these results did not establish any statistical differences between the models. The genetic trend of canine hip dysplasia for LM and TM showed a similarity in shape, but considerable individual differences were found in the EBV ranking lists. Therefore, the selection of breeding animals would not be the same with the 2 methodologies. To select the best method for genetic evaluation of hip dysplasia, further studies using more data and other dog breeds are required.     

Effect of dietary energy source on in vitro substrate utilization and insulin sensitivity of muscle and adipose tissues of Angus and Wagyu steers

Angus (n = 8; 210 kg of BW) and 7/8 Wagyu (n = 8; 174 kg of BW) steers were used to evaluate the effects of dietary energy source on muscle and adipose tissue metabolism and insulin sensitivity. Steers were assigned to either a grain-based (corn) or hay-based (hay) diet and fed to similar final BW. At slaughter, LM and s.c. and i.m. adipose tissue samples were collected. Portions of the LM and adipose tissues were placed immediately in liquid N for later measurement of glycolytic intermediates. Fresh LM and s.c. and i.m. adipose tissues were incubated with [U-(14)C]glucose to assess glucose metabolism in vitro. All in vitro measures were in the presence of 0 or 500 ng/mL of insulin. Also, s.c. and i.m. adipose tissues were incubated with [1-(14)C]acetate to quantify lipid synthesis in vitro. Glucose-6-phosphate and fructose-6-phosphate concentrations were 12.6- and 2.4-fold greater in muscle than in s.c. and i.m. adipose tissues, respectively. Diet did not affect acetate incorporation into fatty acids (P = 0.86). Insulin did not increase conversion of glucose to CO(2), lactate, or total lipid in steers fed hay but caused an increase (per cell) of 97 to 110% in glucose conversion to CO(2), 46 to 54% in glucose conversion to lactate, and 65 to 160% in glucose conversion to total lipid content in adipose tissue from steers fed corn. On a per-cell basis, s.c. adipose tissue had 37% greater glucose oxidation than i.m. adipose (P = 0.04) and 290% greater acetate incorporation into fatty acids than i.m. adipose (P = 0.04). Insulin addition to s.c. adipose tissue from corn-fed steers failed to stimulate glucose incorporation into fatty acids, but exposing i.m. adipose tissue from corn-fed steers to insulin resulted in a 165% increase in glucose incorporation into fatty acids. These results suggest that feeding hay limited both glucose supply and tissue capacity to increase glucose utilization in response to insulin without altering acetate conversion to fatty acids. Because s.c. adipose tissue consistently utilized more acetate and oxidized more glucose than did i.m. adipose, these results suggest that hay-based diets may alter i.m. adipose tissue metabolism with less effect on s.c. adipose tissue.     

Tasco supplementation: effects on carcass characteristics, sensory attributes, and retail display shelf-life

Two hundred crossbred cattle (Bos indicus x Bos taurus) were supplemented with 2% Tasco (Ascophyllum nodosum) in a commercial finishing facility to evaluate marbling score, USDA quality grade, sensory traits, and retail display shelf life. Treatment animals (n = 100) received a steam-rolled corn (Zea mays)-based diet containing 2% Tasco meal (DM basis), for 14 d beginning at d 45 of the finishing period and again 14 d before slaughter. Control animals (n = 100) received a steam-rolled corn (Zea mays)-based diet without Tasco at identical feeding periods. Carcasses from Tasco-fed cattle exhibited greater marbling scores (P = 0.003) than controls. There were no treatment effects (P > 0.05) on sensory, shear, or purge attributes of striploin or inside round steaks with the exception of inside round steaks from Tasco animals having a greater initial tenderness (P = 0.03) and lower off-flavor score (P = 0.002) than control steaks. The LM samples from Tasco-fed cattle had a greater percentage of ether extractable fat (P = 0.001) and lower percentage of protein (P = 0.001) than controls. Inside round samples from treated animals exhibited a greater percentage of moisture (P = 0.03) than control steaks. Visual lean color of striploin steaks was not affected by Tasco supplementation (P = 0.26); however, steaks from Tasco-treated animals were more uniform and had less discoloration and browning than those from controls (P = 0.005, 0.04, and 0.05, respectively). Inside round visual scores and instrument values reflected similar treatment responses (P < 0.05), with a majority of the effects on muscle redness (CIE a*, hue angle) and measures of discoloration. Tasco steaks were generally more red and less discolored during extended postmortem aging and retail exposure (P < 0.05). The results from this study indicate that short-term supplementation of 2% Tasco meal in feedlot cattle increases carcass quality and prolonged retail shelf life.     

Failure mode and bending moment of canine pancarpal arthrodesis constructs stabilized with two different implant systems

Objective— To compare failure mode and bending moment of a canine pancarpal arthrodesis construct using either a 2.7 mm/3.5 mm hybrid dynamic compression plate (HDCP) or a 3.5 mm dynamic compression plate (DCP).
Study Design— Paired in vitro biomechanical testing of canine pancarpal arthrodesis constructs stabilized with either a 2.7/3.5 HDCP or 3.5 DCP.
Sample Population— Paired cadaveric canine antebrachii (n=5).
Methods— Pancarpal arthrodesis constructs were loaded to failure (point of maximum load) in 4-point bending using a materials-testing machine. Using this point of failure, bending moments were calculated from system variables for each construct and the 2 plating systems compared using a paired t-test. To examine the relationship between metacarpal diameter and screw diameter failure loads, linear regression was used and Pearson' correlation coefficient was calculated. Significance was set at P <.05.
Results— HDCP failed at higher loads than DCP for 9 of 10 constructs. The absolute difference in failure rates between the 2 plates was 0.552±0.182 N m, P =.0144 (95% confidence interval: −0.58 to 1.68). This is an 8.1% mean difference in bending strength. There was a significant linear correlation r=0.74 ( P -slope=.014) and 0.8 ( P -slope=.006) between metacarpal diameter and failure loads for the HDCP and 3.5 DCP, respectively.
Conclusion— There was a small but significant difference between bending moment at failure between 2.7/3.5 HDCP and 3.5 DCP constructs; however, the difference may not be clinically evident in all patients.
Clinical Relevance— The 2.7/3.5 HDCP has physical and mechanical properties making it a more desirable plate for pancarpal arthrodesis.     

Assessment of stiffness and strength of 4 different implants available for equine fracture treatment: a study on a 20 degrees oblique long-bone fracture model using a bone substitute

OBJECTIVE: To compare the mechanical properties of 4 stabilization methods for equine long-bone fractures: dynamic compression plate (DCP), limited contact-DCPlate (LC-DCP), locking compression plate (LCP), and the clamp-rod internal fixator (CRIF--formerly VetFix). STUDY DESIGN: In vitro mechanical study. SAMPLE POPULATION: Bone substitute material (24 tubes) was cut at 20 degrees to the long axis of the tube to simulate an oblique mid-shaft fracture. METHODS: Tubes were divided into 4 groups (n=6) and double plated in an orthogonal configuration, with 1 screw of 1 implant being inserted in lag fashion through the "fracture". Thus, the groups were: (1) 2 DCP implants (4.5, broad, 10 holes); (2) 2 LC-DCP implants (5.5, broad, 10 holes); (3) 2 LCP implants (4.5/5.0, broad, 10 holes) and 4 head locking screws/plate; and (4) 2 CRIF (4.5/5.0) and 10 clamps in alternating position left and right of the rod. All constructs were tested in 4-point bending with a quasi-static load until failure. The implant with the interfragmentary screw was always positioned on the tension side of the construct. Force, displacement, and angular displacement at the "fracture" line were determined. Construct stiffness under low and high loads, yield strength, ultimate strength, and maximum angular displacement were determined. RESULTS: None of the implants failed; the strength of the bone substitute was the limiting factor. At low loads, no differences in stiffness were found among groups, but LCP constructs were stiffer than other constructs under high loads (P=.004). Ultimate strength was lowest in the LCP group (P=.01), whereas yield strength was highest for LCP constructs (409 N m, P=.004). CRIF had the lowest yield strength (117 N m, P=.004); no differences in yield strength (250 N m) were found between DCP and LC-DCP constructs. Differences were found for maximum angular displacement at the "fracture" line, between groups: LPC相似文献   

Prediction of accuracy of estimated Mendelian sampling terms

This study describes a general framework for predicting the accuracy of Mendelian sampling terms when truncation selection is applied on best linear unbiased prediction (BLUP) estimated breeding values. A selection index approach is followed. The pseudo‐BLUP index is extended to include terms related to the Mendelian sampling term. Predicted accuracies are compared with those obtained through stochastic computer simulation. Good predictions for the accuracy of the Mendelian sampling term were obtained both at selection time and at convergence of long‐term contributions of selected candidates for a range of heritabilities and population structures. The prediction approach developed provides a key tool for obtaining predictions of genetic response from quadratic optimization that maximizes the rate of genetic progress while restricting the rate of inbreeding.     

Vascular-targeted photodynamic therapy (VTP) of a canine-transmissible venereal tumour in a murine model with Pd-bacteriopheophorbide (WST09)

Treatment of canine‐transmissible venereal tumour (CTVT) with local vascular‐targeted photodynamic therapy (VTP) using Pd‐bacteriopheophorbide (WST09) as a drug is suggested as an alternative to conventional chemotherapy. Male CD1 nude mice were subcutaneously grafted with the xenograft‐transmissible canine venereal tumour (XTVT). The VTP protocol delivered once consisted of intravenous administration of WST09 (10 mg kg^?1) followed by immediate local illumination with a diode laser (763 nm). Controls included animals treated with light or WST09 alone. Macroscopic and microscopic evaluations of tumour response were conducted 10, 24 and 48 h after treatment. Upon VTP, tumours underwent necrosis that lasted 8–10 days and exhibited complete healing by 25–35 days, reaching an overall long‐term cure rate (83%) by 90 days after treatment. This study suggests that VTP with WST09 can efficiently treat CTVT in a single session, as compared with 4–6 sessions of chemotherapy and thus may be feasible for common veterinary practice, particularly under ambulatory conditions.