Comparison of Seven Digital Cameras for Digitizing Radiographs

The purpose of this study was to evaluate seven digital cameras for their ability to adequately capture quality radiographic images and their relative cost effectiveness. Radiographs of line pair (LP) phantoms (ranging from 0.6 to 16.6 LP/mm) and a 20-step contrast phantom were photographed at a near distance of 30.0 cm and a far distance (determined for each camera) at which a full 14 x 17 in film filled the viewfinder. Of the seven cameras tested, the Canon EOS-D30 consistently performed the best in LP/mm resolved (7.7 at close distance, 1.4 at far distance) and in contrast latitude (all 20 steps at both close and far distances). The Canon EOS-D30, determined to be the best camera used in this study for photographing radiographic images, is also the most expensive camera that was used. Two cameras, the Nikon Coolpix 995 and the Sony DSC-F707, were very close to the Canon in performance at considerably less cost. Certain inexpensive cameras may not be acceptable choices for teleradiology.     

Genomic characterization of the first oral avian papillomavirus in a colony of breeding canaries (<Emphasis Type="Italic">Serinus canaria</Emphasis>)

Papillomaviruses are non-enveloped, DNA viruses that infect skin and mucosa of a wide variety of vertebrates, causing neoplasias or simply persisting asymptomatically. Avian papillomaviruses, with six fully sequenced genomes, are the second most studied group after mammalian papillomaviruses. In this study, we describe the first oral avian papillomavirus, detected in the tongue of a dead Yorkshire canary (Serinus canaria) and in oral swabs of the same bird and other two live canaries from an aviary in Madrid, Spain. Its genome is 8,071 bp and presents the canonical papillomavirus architecture with six early (E6, E7, E1, E9, E2, E4) and two late open reading frames (L1 and L2) and a long control region between L1 and E6. This new avian papillomavirus L1 gene shares a 64% pairwise identity with FcPV1 L1, so it has been classified as a new species (ScPV1) within the Ethapapillomavirus genus. Although the canary died after showing breathing problems, there is no evidence that the papillomavirus caused those symptoms so it could be part of the oral microbiota of the birds. Hence, future investigations are needed to evaluate the clinical relevance of the virus.     

Second round of an interlaboratory comparison of SARS-CoV2 molecular detection assays used by 45 veterinary diagnostic laboratories in the United States

The COVID-19 pandemic presents a continued public health challenge. Veterinary diagnostic laboratories in the United States use RT-rtPCR for animal testing, and many laboratories are certified for testing human samples; hence, ensuring that laboratories have sensitive and specific SARS-CoV2 testing methods is a critical component of the pandemic response. In 2020, the FDA Veterinary Laboratory Investigation and Response Network (Vet-LIRN) led an interlaboratory comparison (ILC1) to help laboratories evaluate their existing RT-rtPCR methods for detecting SARS-CoV2. All participating laboratories were able to detect the viral RNA spiked in buffer and PrimeStore molecular transport medium (MTM). With ILC2, Vet-LIRN extended ILC1 by evaluating analytical sensitivity and specificity of the methods used by participating laboratories to detect 3 SARS-CoV2 variants (B.1; B.1.1.7 [Alpha]; B.1.351 [Beta]) at various copy levels. We analyzed 57 sets of results from 45 laboratories qualitatively and quantitatively according to the principles of ISO 16140-2:2016. More than 95% of analysts detected the SARS-CoV2 RNA in MTM at ≥500 copies for all 3 variants. In addition, for nucleocapsid markers N1 and N2, 81% and 92% of the analysts detected ≤20 copies in the assays, respectively. The analytical specificity of the evaluated methods was >99%. Participating laboratories were able to assess their current method performance, identify possible limitations, and recognize method strengths as part of a continuous learning environment to support the critical need for the reliable diagnosis of COVID-19 in potentially infected animals and humans.     

Effects of soil pH and soil water content on prosulfuron dissipation

The sulfonylurea herbicide prosulfuron, 1-(4-methoxy-6-methyltriazin-2-yl)-3-[2-(3,3,3-trifluoropropyl)phenylsulfonyl]urea, is used for the selective control of broadleaf weeds in corn, sorghum, and cereal grains. To investigate its fate in soils, this study examined the effects of soil pH and water content on the rates of dissipation processes and the products formed under aerobic conditions. Radiometry and chromatography analyses were used to quantify the degradation products and bound residues formed in incubations of 10 different soils. The pH-dependent hydrolysis of the sulfonylurea bridge to form phenyl sulfonamide was the primary transformation process. Significant microbial degradation of prosulfuron occurred in 2 of the 10 soils, yielding (14)CO(2) and desmethyl prosulfuron among the major products. The time required for 50% dissipation of the herbicide (DT(50)) was determined for each soil and water content treatment. At equivalent water contents, prosulfuron DT(50) values were positively correlated with soil pH (P < 0.0001), varying from 6.5 days at pH 5.4 to 122.9 days at pH 7.9. Soil pH and water content strongly influence the fate of sulfonylurea herbicides in agricultural fields. Differences in the effect of soil water content on dissipation kinetics in a comparison of two soils were attributed to differences in soil pH, texture, and the ability of indigenous microorganisms to transform the herbicide.     

Permeability profile estimation of flavonoids and other phenolic compounds by biopartitioning micellar capillary chromatography

This paper points out the usefulness of biopartitioning micellar chromatography (BMC) using capillary columns as a high-throughput primary screening tool providing key information about the oral absorption, skin permeability, and brain-blood distribution coefficients of 15 polyphenols (6 flavones, 2 flavonols, a flavanone, 2 flavan-3-ols, 3 phenolic acids, and a phloroglucinol) in a simple and economical way. For the compounds studied, except vicenin-2, rutin, chlorogenic acid, p-hydroxycinnamic acid, and 4-hydroxybenzoic acid, maximal oral absorption (>90%) can be expected, if there are not solubility problems or metabolic processes. On the other hand, the most retained compounds in BMC, that is, 5-hydroxyflavone, flavone, and flavanone, show the highest brain-blood distribution coefficients and skin permeability coefficients.     

Climatic control of riverine and seawater uranium-isotope ratios

The large variation in the ratio of uranium-234 to uranium-238 (234U/238U) in rivers is not well understood, but may provide information about past weathering and rainfall and is important because it controls seawater (234U/238U). Here, we demonstrate the importance of physical weathering and rainfall for (234U/238U), using rivers from South Island, New Zealand. These data allow interpretation of an existing speleothem (234U/238U) record and suggest that New Zealand glacier advance 13,000 years ago was influenced by increased rainfall rather than by Younger Dryas-like cooling. A model of seawater (234U/238U) during glacial cycles indicates that rejection of corals based on modern (234U/238U) +/- <0.01 is not merited and may reject the highest quality ages.     

Analysing agricultural users’ patterns of behaviour: The case of OPTIRas™, a decision support system for starch crop selection

Redesigning IT systems for specific user groups encompasses a lot of effort with respect to analysing and understanding user behaviour. The goal of this paper is to provide insights into patterns of behaviour of agricultural users, during the usage of a decision support system called OPTIRas™. This system aids agricultural users in their cultivar selection activities. We analyse logs resulting from OPTIRas™, and we get insights into user’s navigational patterns. We claim that the results of our analysis can be used to support the redesign of decision support systems in order to address specific agricultural users’ characteristics.     

Mechanical behavior of composites reinforced with fibers caroa

Composites were prepared with 13, 23 30 and 40 % fiber and evaluated the mechanical performance in tensile, flexural and impact. The mechanical properties of these composites were also evaluated function of time at 110 °C thermal exposure. Caroa fibers were characterized by techniques such as thermal gravimetric analysis (TGA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that the best mechanical properties were achieved for composites containing 23 to 30 % fiber. The incorporation of 23 % fiber caroa increased both the modulus of elasticity in the tensile test as the flexural strength and impact, the composite with 30 % fiber caroa showed higher tensile strength. The results show that the tensile and flexural strength of the composite decreased with time of thermal exposure. The thermal aging at 110 °C caused a decrease in tensile properties of the composites.