Effects of alpha-pinene odor in different concentrations on stress-induced hyperthermia in rats

Stress-induced hyperthermia is observed in animals exposed to stressful conditions. In our previous study, plant-derived fragrances such as green odor and alpha-pinene were shown to suppress this stress response in rats. In the present study, we examined the concentration-dependence of the alpha-pinene effects on stress-induced hyperthermia. Male rats carrying telemetry transmitters were transferred individually to a new cage containing bedding that had been sprayed with 0.3, 0.03, and 0.003% concentrations of alpha-pinene or control solvent. Following transfer to the novel environment, the body temperature increased significantly, and this response was clearly suppressed when the cage was scattered with 0.03% alpha-pinene only. These results suggest that the effect of alpha-pinene on stress-induced hyperthermia can be observed only at a certain concentration.     

Substances derived from 4-ethyl octanoic acid account for primer pheromone activity for the "male effect" in goats

A major constituent of the characteristic "goaty odor" 4-ethyl octanoic acid (4EOA) was previously shown to have no primer pheromone activity. This was also confirmed by our own bioassay system utilizing the recording technique of neural activity of the hypothalamic gonadotropin-releasing hormone pulse generator in goats. However, when the synthetic 4EOA solution was kept at room temperature for several months, primer pheromone activity appeared in the same solution. Headspace gas chromatography/mass spectrometry analysis revealed that there were several newly formed substances in addition to 4EOA samples with primer pheromone activity. These results suggest that 4EOA derived substance(s) but not 4EOA itself is(are) primer pheromone in goats.     

Modulation of sodium channels by the oxadiazine insecticide indoxacarb and its N-decarbomethoxylated metabolite in rat dorsal root ganglion neurons

The effects of the oxadiazine insecticide indoxacarb and its N-decarbomethoxylated metabolite (DCJW) on tetrodotoxin-resistant (TTX-R) voltage-gated sodium channels in rat dorsal ganglion neurons were studied using the whole-cell patch clamp technique. Indoxacarb and DCJW suppressed the peak amplitude of action potentials, and DCJW exhibited a faster time course and higher potency than indoxacarb in the blocking effects. In voltage-clamp experiments, indoxacarb and DCJW suppressed TTX-R sodium currents in a time-dependent manner without a steady-state level of suppression. IC50 values for indoxacarb and DCJW on TTX-R sodium currents were estimated to be 10.7 and 0.8 microM after 25 min of bath application, respectively. DCJW was about 10 times more potent than indoxacarb in blocking TTX-R sodium currents. Although the suppressive effects of indoxacarb were partially reversible after washout with drug-free external solution, no recovery of sodium current was observed in DCJW treated neurons after prolonged washout. In current-voltage relationships, both indoxacarb and DCJW blocked the sodium currents to the same degree in the entire range of membrane potentials. The sodium conductance-voltage curve was not shifted along the voltage axis by indoxacarb and DCJW at 10 microM. In contrast, the steady-state inactivation curves were shifted in the hyperpolarizing direction by indoxacarb as well as by DCJW. Based on these results, it was concluded that indoxacarb and DCJW potently blocked the TTX-R sodium channel in rat DRG neurons with hyperpolarizing shifts of the steady-state inactivation curves, suggesting preferential association of the insecticides to the inactivated state of sodium channels. The small structural variation between indoxacarb and DCJW resulted in clear differences in potency for blocking sodium channels and reversibility after washout.     

Physicochemical properties of the thermal gel of water-washed meat in the presence of the more soluble fraction of porcine sarcoplasmic protein

We investigated the physicochemical properties of the thermal gel of water‐washed pork meat (WWM) in the presence of the soluble fraction of porcine sarcoplasmic protein (SP) obtained with ammonium sulfate at 75 percent saturation. Two precipitated fractions of SP were obtained at 0–50 percent and 50–75 percent saturation, named SP‐f1 and SP‐f2, respectively, and the soluble fraction obtained at 75 percent saturation, SP‐f3, was used. Sodium dodecyl sulfate‐polyacrylamide gel electrophoresis showed that SP‐f3 contained mainly glyceraldehyde‐3‐phosphate dehydrogenase (GAPDH), while SP‐f1 and SP‐f2 had other SPs such as phosphorylase b, enolase, actin and phosphoglycerate mutase. The gel strength of WWM was greater when SP‐f3 rather than one of various animal proteins such as bovine plasma (BP), egg white, or whey protein isolates (WPI), was added and SP‐f3 had a gel‐enhancing effect as good as that of polyphosphate (PP). The gel strength of WWM with added SP‐f3 increased significantly with NaCl at 0.15 mol/L or more, but not in the absence of NaCl (0 mol/L). The effect of SP‐f3 was evident at neutral pH and maximum gel strength was obtained at a pH above 6.0. Differential scanning calorimetric (DSC) analysis showed that an endothermic peak corresponding to myosin heads in WWM shifted to a lower temperature with the addition of SP‐f3, as in the case of PP, though there was no such shift in the presence of other animal proteins (BP, egg white and WPI), suggesting that SP‐f3 increases the gel strength of WWM through the dissociation of actomyosin similar to PP. Scanning electron microscopy (SEM) revealed wall‐like structures among the protein strands in the WWM gel matrix in the presence of SP‐f3. The results of DSC and SEM indicated that the formation of a gel network in meat products is reinforced with GAPDH in SP after the interaction between GAPDH and myofibrillar protein.     

Semi-quantitative method to evaluate the α-carbonyl content in lignin

A method to estimate the content of -carbonyl structures in lignin was developed. This method consists of two successive treatments: NaBD₄ treatment of pulp to reduce an -carbonyl structure in lignin, and nitrobenzene oxidation. NaBD₄ was used to convert an -carbonyl structure to a deuterium-labeled hydroxymethine structure. The ratio of D-vanillin [(HO)(H₃CO)C₆H₃CDO] to H-vanillin [(HO)(H₃CO)C₆H₃CHO] or that of their syringyl analogues obtained by nitrobenzene oxidation was used as the measure of the content of -carbonyl structure. Model experiments demonstrated that when sodium hydroxide was used as alkali for the nitrobenzene oxidation, the retention of deuterium at the side chain -position was very low due to the displacement of deuterium with hydrogen by an unknown reaction mechanism. In order to depress this unexpected displacement, the reaction conditions of the nitrobenzene oxidation were modified. The modified nitrobenzene oxidation employs 0.5mol/l of lithium hydroxide as a reaction medium instead of 2.0mol/l sodium hydroxide. By this modification, this method could successfully trace the formation and the degradation of the -carbonyl structure in milled wood lignins.This paper was presented in part at the 11th International Symposium on Wood and Pulping Chemistry, Nice, France, June 2001 and at the 46th Lignin Symposium, Kyoto, Japan, November 2001     

Feeding activities of Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe) as affected by moisture content of wood

The relationship between the moisture content (MC) of wood blocks and the feeding activities of two Japanese subterranean termites, Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe), was investigated with two choice tests. When three wood blocks with low MC (6%–12%), middle MC (79%–103%), and high MC (140%–182%) were exposed to workers of C. formosanus and R. speratus in a choice test, the feeding preferences were found in the middle MC blocks for C. formosanus, and the middle and high MC blocks for R. speratus, although wood blocks of low MC were also attacked. In a second choice test, wood blocks consisting of five pieces with water-impregnated (MC: 133%–191%) top, middle, or bottom piece were exposed to workers of both species. Higher consumptions were generally obtained in water-impregnated wood pieces and bottom pieces.     

Comparative effectiveness of two alkylammonium compounds as wood preservatives

This study describes a laboratory evaluation of the efficacy of two alkylammonium compounds [didecyldimethylammonium tetrafluoroborate (DBF) and didecyldimethylammonium chloride (DDAC)] when applied via vacuum impregnation or superficial treatment. Treated wood specimens were tested for their termite and microbial resistance under controlled laboratory conditions. The higher chemical retentions were needed to suppress the feeding by Coptotermes formosanus ≦3% mass loss in the multichoice test than in the no-choice test. The DBF and DDAC retention levels necessary to meet the performance requirement ≦3% mass loss after 12-week fungal exposure varied with wood species. The retention level of 3 kg/m³ for DBF and DDAC was generally high to keep the nondurable wood species free of decay. Although there was no difference between DBF and DDAC in the efficacy against decay and termite attack, the former slightly outperformed the latter as an antimold and antisapstain agent.     

Lignin fragments rich in detached side-chain structures found in water-soluble LCC

The content of the glyceraldehyde-2-aryl ether-type structure in water-soluble lignin–carbohydrate complex (LCC) fractions, which were obtained from Japanese cedar and birch residual wood meal after milled wood lignin isolation, was determined by ozonation. Quite high amounts of the glyceraldehyde-2-aryl ether-type structure were found in water-soluble LCC fractions of both species; about 3–5 times higher than those of other fractions. This result, as well as the high content of the β-1 structure in these fractions shown in our previous reports, suggest that lignin in these fractions has the characteristics of endwise-type lignin, because the glyceraldehyde-2-aryl ether-type structure and β-1 structure are typical characteristics of this type of lignin fraction. These results are in good agreement with the generally accepted hypothesis that the glyceraldehyde-2-aryl ether-type structure and β-1 structure are generated at the same time by a radical coupling reaction. The results also indicated that these two structures are present in close proximity in the lignin.     

Screening method for wood extractives: direct cellulose thin-layer chromatography plate

A method for screening wood extractives was developed using cellulose thin-layer chromatography plate (Cell-TLC) separation and was directly applied to bioassays. Wood meal (60 mesh) from nangka (Artocarpus heterophyllus Lamk) heartwood was extracted with hot methanol. The crude extract was separated using a Cell-TLC plate (50 × 50mm). Two broad bands with R_f values of 0.46 and 0.96 were found, and the bands showed completely different effects against the pest termite Coptotermes formosanus Shiraki and the decay fungus Fomitopsis palustris. The band with R_f 0.46 was preferentially consumed by workers of C. formosanus, and it did not show any growth inhibition against F. palustris when the Cell-TLC plate was directly exposed to the organism. In contrast, the band with R_f 0.96 appeared to repel strongly the feeding by C. formosanus and inhibited the growth of F. palustris. It was concluded that the Cell-TLC system was applicable for screening wood extracts consisting of many compounds.