海河二道闸和防潮闸优化调度研究

汛期为腾空海河河道并保证二道闸下咸水不致上溯，二道闸闸下水位应控制在1.0m左右。利用一维非恒定流模型对海河自西河闸至入海口河段进行数值模拟，研究了西河闸分流量为80、100、120m3/s3种情况下，海河防潮闸和二道闸优化调度结果。     

弱光条件下桃光合作用的动态变化及品种差异分析

就日光温室桃树光合生理进行了详尽的研究,结果表明:1d中叶温与气温以14:00时较高。遮阴明显地降低了到达叶片表面的有效光合辐射、叶温与气温。桃叶片的光合速率日变化为双峰曲线,峰值大约出现在上午10:00与下午14:00时;不同品种弱光下的光合速率有明显的差异,以NJN较高,其次为五月火与麦香。遮阴降低了桃叶片的光合速率,以NJN光合速率降低的较少,说明NJN能适应设施栽培。气孔阻力与蒸腾速率则随着遮阴程度的增加而增加。桃中位叶的光合速率较幼叶高。     

穿龙薯蓣根的诱导和快繁及薯蓣皂苷元含量的测定

以穿龙薯蓣的丛生芽为材料,对根的诱导及快速繁殖进行了研究,并利用反相高效液相色谱技术对根中薯蓣皂苷元含量进行了测定,结果如下：不添加任何激素的1/2MS培养基是诱导生根的最佳培养基,生根率最高达76.7%;MS＋0.2 mg/L NAA＋0.5 mg/L IBA＋0.2-0.5 mg/L PP333为根增殖的最佳培养基,60 d时增殖倍数超过93;快繁过程中根的生长形态发生变化,不同类型的根中薯蓣皂苷元含量差异不显著,平均为0.21%     

利用SSR标记构建贵州山区玉米杂交种的指纹库

对贵州山区目前在生产上正在使用的西山系列玉米杂交种12份进行了SSR分析。从60对引物中筛选到稳定性好、多态性丰富的8对引物作为核心引物。用这8对引物的指纹组合构建了贵州山区西山系列玉米杂交种的DNA指纹数据库。结果表明,利用SSR技术进行玉米杂交种真实性的鉴定是可行、有效的。     

穿龙薯蓣根的诱导和快繁及薯蓣皂苷元含量的测定

以穿龙薯蓣的丛生芽为材料,对根的诱导及快速繁殖进行了研究,并利用反相高效液相色谱技术对根中薯蓣皂苷元含量进行了测定,结果如下:不添加任何激素的1/2MS培养基是诱导生根的最佳培养基,生根率最高达76.7%;MS 0.2 mg/L NAA 0.5 mg/L IBA 0.2～0.5 mg/L PP333为根增殖的最佳培养基,60 d时增殖倍数超过93;快繁过程中根的生长形态发生变化,不同类型的根中薯蓣皂苷元含量差异不显著,平均为0.21%     

Advances in Pharmacological Studies of Coptis Chinesis

A Coptis Chinesis is the dry rhizoma of ranunculaceous Coptis Chinesis Franch or Coptis deltoidea C. 7. Cheng et Hisao, or Coptis teeta Wall. It is the traditional Chinese herb, which is used in the contagious diseases. In recent years, its new pharmacological actions have been reported, which are antitumour, hypoglycemic response, immunoloregulation, improving the functions of cardiovascular. The important pharmacological functions of Coptis Chinesis are hypoglycemic response, improving the functions of cardiovascular, antitumour. With the deeply researching of Coptis Chinesis pharmacology, and the continuous founding of pharmacological mechanism, new preparation will be widely applied in the clinic.     

Electro-circuit Design About the Data Acquisition and Wireless Transmission System Based on High-speed SCM

Considering the difficult of acquiring and transmission the signal from the moving equipment, a new fault diagnosis monitoring system is presented. The system acquires the state signal from the moving equipment by data acquisition module that based in W77E58 high-speed SCM, and transmits the data fast by wireless mode. The signal data can be use for fault diagnosis and precise analysis. The system has the ability for acquiring abundance of data with a high speed, the ability for high accuracy data conversion, and has a function of programme controlling gain and programme controlling low-pass filtering. The successful application of this system on the vibration monitor about the material-transporting bogie in an iron works of a domestic steel enterprise proves the stability and credibility about the design project, also testifies its practical value and versatility.     

Calculating the Hollowing-center Grounding Device Resistance Based on the Surface Charge Simulation Method

An equivalent model for hollowing-center grounding device is proposed, the hollowing-center grounding device resistance is calculated with the surface charge simulation method and the computer programme is programmed based on this model. The accuracy of the model and method is validated by experimentation.     

Transmission Congestion Management Based on Power Influence Coefficient

Basing eliminating on the idea that the generator who has the most influence on the power flow of line is mostly in favor of transmission congestion, the model of congestion management with the object of minimizing adjustments of bufions varied with generation outputs is proposed. It can eliminate the congestion effectively by judging the generators who should be adjusted and the amounts of adjustment. The test on IEEE-RTS24 buses system and other practical systems show that the proposed method is effective.