Effects of Low- Intensity Ultrasound Treatment on Excess Sludge

In this study the influence of the low-intensity ultrasound treatment on excess sludge has been observed.The oxygen uptake rate(OUR),soluble chemical oxygen demand(SCOD),soluble total nitrogen(TN) and soluble total phosphorus(TP) were examined for three power levels of 0.03 W/mL, 0.05 W/mL and 0.1 W/mL as well as two time series of 0~5 min and 0~30 min.It showed that there were two stages of ultrasonic treatment: the first stage took place within the flocs in four minutes,in which SCOD,TN,TP were dissolved from flocs.In the second stage,the microbial activities have been strengthened,as well as OUR,TN,TP have increased greatly.     

Hydrolysis and Condensation of Silane Agent for Metallic Surface Treatment

Novel surface treatment technique by silane film is developing for metallic anti corrosion and coat improvement. The key points, hydrolysis and condensation, for the stability of the Silane agent(SA) solution is investigated, and the effective factors of stability for silane agent solution and the relative rule are discussed. It is found that stability of SA solution is related to the temperature, pH, solvents, SA concentration and additive by studying the state of the solution and the conductivity-time curve of SA solution. Meanwhile, controlling factors and improving methods for SA stability are proposed to guide the practical application of metallic surface anti-corrosion treatment by SA.     

Analysis of Radial Forces on the Seal Block in a Compound Gear Pump with 3 Idle Gears

By analyzing the pressure distribution between gears and sealing blocks in compound gear pump with three idlers,the resultant hydraulic forces acting on seal blocks are obtained.The conclusion is the unbalanced resultant hydraulic forces are relatively small in magnitude.In the pump,the inner sealing edges are long and so it s Sealing effect is good,but the outer sealing effect is relatively poor because of its short sealing edges.The little unbalanced force pushes the sealing block to te pumping chamber,therefore it is advantageous to meliorating the pump's sealing effect,thereby to improving it's volumetric efficiency as well.     

Pd Pattern Recognition Based on Linear Discriminant Analysis in GIS

According to the character of PD in GIS, the authors design four kinds of GIS defection models. The GIS gray intensity images are constructed based on mass specimens gathered by the ultra - high frequency and high speeds systems, Aiming at the PD characteristics and its defections, A PCA-FDA method is put forward based on PD images. The principal component analysis is employed to condense the dimension of PD images, then the optimal sets of statistically uncorrelated discriminant vectors are extracted, and the minimum distance classifier is constructed as classifier. The identified results show that this method can effectively elevated the discrimination of the four kinds of defects in GIS PD.     

Monitoring of Vibration Exposure for Taxi Drivers

Vibration Exposure of taxi driver has not only impact on driverg health but the safety of driving. The constantspeed running test and a monitoring test in actually situationare done. The taxi driver vibration exposure testing data is analyzed, and it is found that the vibration exposure evaluation of constant speed test cant satisfy the actually situation. At last, animpersonalassessment is done according to the vibration exposure evaluation standard of ISO2631.     

Design for Precision Measurement System Based on Machine Vision

It is difficult to measure the geometric quantity of small parts in finishing, assembling and measuring, because it's easy to break the workpieces' surface and alter their position by means of traditional contact measuring methods.There are some non contact measurers, such as,light feeler pin and interference microscope etc., because of it's high price and strict working conditions,so it's difficult to promote them in widely use. Precision measurement system based on machine vision has the advantages of non contact measuring as well as high performance and low price. Some problems, such as light source, algorithm of edge fitting, auto focusing,are discussed.