Sedimentary characterization of Tagus estuarine beaches (Portugal)

Background, Aim and Scope  The distribution of sediments in estuarine beaches is controlled by the interactions between sediment supply, hydrodynamic processes and human intervention. The main purpose of this study is to characterize the sediments of Tagus estuarine beaches in order to understand their origin and to contribute to a better knowledge of the Tagus estuary sediment budget. Methods  Surface sediment samples were collected across beach profiles and sand grain size analysis was performed by dry sieving. Grain size statistics for the median (d₅₀) and standard deviation (SDM) were obtained using the Moment method. This study was complemented by a qualitative evaluation of the sediment composition. Cross-shore topographic surveys were conducted for selected sampling sites. Results  Tagus estuarine beach sediments are mainly composed of quartz sand particles which are fine-grained and well sorted near the mouth of the estuary and medium to coarse-grained and moderately sorted in the inner domain. Compositional results show evidence of active anthropogenic sediment sources, especially in the coarser fractions. Discussion  The analysis of the textural and compositional characteristics of beach sediments in the inner estuarine domain is compatible with local sedimentary sources, while a marine signature is present at the mouth and inlet channel sediments. In the inner domain, differences in the sedimentary processes are represented by the textural characteristics of the sediments, such as the sorting degree and the gravel content. Sediment characteristics also reflect human intervention in the system, with the introduction of anthropogenic and allochthonous particles and the mixture of sediments from different sources. Conclusions  The sediments of the inner Tagus estuarine beaches are derived from local Plio-Pleistocene outcrops while inlet and outer estuary beaches reveal a dominant marine source. Beach textural variability observed in the inner domain is not related to wave forcing gradients, but mainly to variations in the sedimentary processes along the estuarine margins and to human intervention. Results show that the Tagus estuarine beaches depended, almost exclusively, on sediment input from local sources until the last century. With increasing human occupation, sediment transfers became dominated by anthropogenically related activities mainly connected with the occupation of estuarine margins and dredging. Recommendations and Perspectives  Further studies should extend the present level of knowledge in what concerns sand transport patterns through additional compositional and geochemical analysis, and the development of new techniques in order to allow the quantitative evaluation of the impact of human activities on the sediment budget.     

Effects of inbreeding on nodal root system morphology and architecture of white clover (<Emphasis Type="Italic">Trifolium repens</Emphasis> L.)

Plants of white clover (Trifolium repens L.) cultivar Crau, a self-fertile Crau genotype, and nine generations of inbred progeny were raised in sand culture in a glasshouse experiment. Digital images of the root systems were made and root morphological characteristics were determined on all the plants. Root architectural parameters were measured on the Crau parent and the S₁, S₄, S₆, and S₉ inbred lines. The clover roots became shorter and thicker with inbreeding but the number of root tips per plant was unchanged. Root architecture (branching pattern) was largely unaffected by inbreeding. It is concluded that inbreeding white clover will lead to shorter, thicker roots, and reduced nutrient uptake efficiency compared with the parent clover. The degree to which these deleterious traits are overcome during the development of F₁ hybrids needs to be determined.     

Production of mutants with high cold tolerance in spring canola (<Emphasis Type="Italic">Brassica napus</Emphasis>)

A major factor affecting spring canola (Brassica napus) production in Canada is killing frosts during seedling development in the spring and seed maturation in the fall. The objective of this study was to explore the possibility of producing spring canola lines with mutations that have altered biochemical pathways that increase cold tolerance. The approach was to generate UV point mutations in cultured microspores followed by chemical in vitro selection of individual mutant microspores or embryos resulting in measurable alterations to various biochemical pathways with elevated levels of key defense signaling molecules such as, salicylic acid (SA), p-Fluoro-d,l-Phenyl Alanine (FPA), and jasmonic acid (JA). In addition, since proline (Pro) is known to protect plant tissues in the cold-induced osmotic stress pathway, mutants that overproduce Pro were selected in vitro by using three Pro analogues: hydroxyproline (HP), azetidine-2-carboxylate (A2C); and, 3,4-dehydro-d,l-proline (DP). Of the 329 in vitro selected mutant embryos produced, 74 were identified with significant cold tolerance compared to their donor parents through indoor freezer tests at −6°C, and 19 had better winter field survival than winter canola checks. All chemically selected mutant doubled haploids with increased cold tolerance compared well with parent lines for all seed quality and agronomic parameters. Development of increased frost tolerant cultivars should allow for spring canola to be produced in western Canada without compromising seed quality.     

The inheritance of chemical phenotype in <Emphasis Type="Italic">Cannabis sativa</Emphasis> L. (III): variation in cannabichromene proportion

The mechanism that controls the proportion of cannabichromene (CBC), a potential pharmaceutical, in the cannabinoid fraction of Cannabis sativa L. is explored. As with tetrahydrocannabinol (THC) and cannabidiol (CBD), CBC is an enzymatic conversion product of the precursor cannabigerol (CBG). CBC is reported to dominate the cannabinoid fraction of juveniles and to decline with maturation. This ontogeny was confirmed in inbred lines with different mature chemotypes. A consistent CBC presence was found in early leaves from a diverse clone collection, suggesting that CBC synthase is encoded by a fixed locus. Morphological variants possessing a ‘prolonged juvenile chemotype’ (PJC), a substantial proportion of CBC persisting up to maturity, are presented. PJC is associated with a reduced presence of floral bracts, bracteoles, and capitate-stalked trichomes. Genetic factors causing these features were independent of the allelic chemotype locus B that was previously postulated and regulates THC and CBD synthesis and CBG accumulation. In contrast to previously described Cannabis chemotypes, the cannabinoid composition of PJCs showed plasticity in that reduced light levels increased the CBC proportion. The ability of PJC plants to enable the production of pharmaceutical raw material with high CBC purity is demonstrated.     

Soil compaction and forest floor removal reduced microbial biomass and enzyme activities in a boreal aspen forest soil

Soil enzymes are linked to microbial functions and nutrient cycling in forest ecosystems and are considered sensitive to soil disturbances. We investigated the effects of severe soil compaction and whole-tree harvesting plus forest floor removal (referred to as FFR below, compared with stem-only harvesting) on available N, microbial biomass C (MBC), microbial biomass N (MBN), and microbial biomass P (MBP), and dehydrogenase, protease, and phosphatase activities in the forest floor and 0–10 cm mineral soil in a boreal aspen (Populus tremuloides Michx.) forest soil near Dawson Creek, British Columbia, Canada. In the forest floor, no soil compaction effects were observed for any of the soil microbial or enzyme activity parameters measured. In the mineral soil, compaction reduced available N, MBP, and acid phosphatase by 53, 47, and 48%, respectively, when forest floor was intact, and protease and alkaline phosphatase activities by 28 and 27%, respectively, regardless of FFR. Forest floor removal reduced available P, MBC, MBN, and protease and alkaline phosphatase activities by 38, 46, 49, 25, and 45%, respectively, regardless of soil compaction, and available N, MBP, and acid phosphatase activity by 52, 50, and 39%, respectively, in the noncompacted soil. Neither soil compaction nor FFR affected dehydrogenase activities. Reductions in microbial biomass and protease and phosphatase activities after compaction and FFR likely led to the reduced N and P availabilities in the soil. Our results indicate that microbial biomass and enzyme activities were sensitive to soil compaction and FFR and that such disturbances had negative consequences for forest soil N and P cycling and fertility.     

Influence of non-cellulose structural carbohydrate composition on plant material decomposition in soil

The C mineralisation pattern during the early stage of decomposition of plant materials is largely determined by their content of different carbohydrates. This study investigated whether detailed plant analysis could provide a better prediction of C mineralisation during decomposition than proximate analysis [neutral detergent solution (NDF)/acid detergent solution (ADF)]. The detailed analysis included sugars, fructans, starch, pectin, cellulose, lignin and organic N. To determine whether differences in decomposition rate were related to differences in hemicellulose composition, the analysis particularly emphasised the concentrations of arabinose and xylose in hemicelluloses. Carbon dioxide evolution was monitored hourly in soil amended with ten different plant materials. Principal component and regression analysis showed that C mineralisation during day 1 was closely related to free sugars, fructans and soluble organic N components (R ² = 0.83). The sum of non-cellulose structural carbohydrates (intermediate NDF/ADF fraction) was not related to C mineralisation between days 1 and 9. In contrast, a model including starch and protein in addition to the non-cellulose structural carbohydrates, with the hemicelluloses replaced by arabinose and xylose, showed a strong relationship with evolved CO₂ (R ² = 0.87). Carbon mineralisation between days 9 and 34 was better explained by xylan, cellulose and lignin (R ² = 0.72) than by lignocellulose in the ADF fraction. Our results indicated that proximate analyses were not sufficient to explain differences in decomposition. To predict C mineralisation from the range of plant materials studied, we propose a minimum set of analyses comprising total N, free sugars, starch, arabinose, xylan, cellulose and lignin.     

Salinity and sodicity effects on respiration and microbial biomass of soil

An understanding of the effects of salinity and sodicity on soil carbon (C) stocks and fluxes is critical in environmental management, as the areal extents of salinity and sodicity are predicted to increase. The effects of salinity and sodicity on the soil microbial biomass (SMB) and soil respiration were assessed over 12weeks under controlled conditions by subjecting disturbed soil samples from a vegetated soil profile to leaching with one of six salt solutions; a combination of low-salinity (0.5dSm⁻¹), mid-salinity (10dSm⁻¹), or high-salinity (30dSm⁻¹), with either low-sodicity (sodium adsorption ratio, SAR, 1), or high-sodicity (SAR 30) to give six treatments: control (low-salinity low-sodicity); low-salinity high-sodicity; mid-salinity low-sodicity; mid-salinity high-sodicity; high-salinity low-sodicity; and high-salinity high-sodicity. Soil respiration rate was highest (56–80mg CO₂-C kg⁻¹ soil) in the low-salinity treatments and lowest (1–5mg CO₂-C kg⁻¹ soil) in the mid-salinity treatments, while the SMB was highest in the high-salinity treatments (459–565mg kg⁻¹ soil) and lowest in the low-salinity treatments (158–172mg kg⁻¹ soil). This was attributed to increased substrate availability with high salt concentrations through either increased dispersion of soil aggregates or dissolution or hydrolysis of soil organic matter, which may offset some of the stresses placed on the microbial population from high salt concentrations. The apparent disparity in trends in respiration and the SMB may be due to an induced shift in the microbial population, from one dominated by more active microorganisms to one dominated by less active microorganisms.     

Agronomical,quality, and molecular characterization of twenty Italian emmer wheat (<Emphasis Type="Italic">Triticum dicoccon</Emphasis>) accessions

Emmer wheat (Triticum dicoccon Schrank, 2n = 4x = 28) consists in a hulled wheat; its cultivation has been drastically reduced during the last century as a consequence of its low yield. Recently, its agronomic and nutritive values, as well as the increase of popularity of organic agriculture, have led to a renewed interest making its cultivation economically viable in the marginal lands with an increase of the cultivated areas. In Italy, it mainly survives in few marginal lands of central and southern Italy, where local varieties, adapted to the natural environment from where they originate, are used; moreover, some selected lines have also been developed. In the present work, agro-morphological and qualitative traits, together with molecular analyses of 20 emmer accessions consisting of Italian landraces, breeding lines, and cultivars, were performed. The field experiments were conducted for two consecutive years (2001/2002–2002/2003) in two locations: Viterbo in central Italy, and Foggia in south Italy. The analyzed emmer wheat accessions showed a good amount of genetic variability for both evaluated agro-morphological and molecular traits. This study illustrates an increase in earliness, GY, TW, TKW, and YI going from landraces, breeding lines to cultivars, while the variability does not change proportionally.     

Leaching characteristics of homologues of benzalkonium chloride from wood treated with ammoniacal copper quaternary wood preservative

In Japan, ammoniacal copper quaternary wood preservatives type-1 (ACQ-1), which contains copper and benzalkonium chloride as its active ingredients, is among the most widely used wood preservatives in the pressure treatment of wood. Benzalkonium chloride (BAC) in commercial ACQ-1 products mainly comprises C12 and C14 homologues. In the present study, the leaching characteristics of these BAC homologues were investigated using the heartwood and sapwood portions of Japanese cedar, Japanese larch, and Sakhalin fir treated with ACQ-1 and 1% monoethanolamine (MEA) solution containing equimolar amounts of homologues. Distilled water (DW) and artificial seawater (SW) were used as leaching media. Consequently, it was observed that the leaching rate of the C12 homologue tended to be higher than that of the C14 homologue in DW. The leaching of C12 homologues was accelerated by using SW, resulting in a significantly higher leaching rate than the C14 homologue using SW. It was thought that the difference in the hydrophobicities based on alkyl chain lengths resulted in these phenomena. However, when the heartwood portion of Japanese larch was treated with the homologues in MEA, the leaching rate of the C14 homologue was significantly higher than that of the C12 homologue.     

UV老化后氧化铁颜料着色木纤维-HDPE复合材料的性能变化

探讨了氧化铁颜料对木纤维．高密度聚乙烯复合材耐老化性能的改善作用。采用四种常用的氧化铁颜料与木纤维、高密度聚乙烯和其他加工助剂干混,并用自行设计的双螺杆／单螺杆双阶挤出机组制造木塑复合材料。对该木塑复合材料进行人工加速紫外循环老化处理,用CIE1976L^＊a^＊b^＊表色体系和ASTMD790标准分别对老化前后的材料进行测试,结果显示加入颜料以后木塑复合材料的抗弯弹性模量没有明显的变化,但是弯曲强度都有一定程度的提高。经过2000h人工加速紫外老化以后,不论是颜色要是力学性能都发生了明显的变化。铁红和铁黑着色的试样在整个老化过程中表现较好,颜料添加量约2．28％比较适宜。