Species-barrier on the cross-species oral transmission of bovine AA amyloidosis in mice

In AA amyloidosis, cross-species oral transmission has been demonstrated in several animal models. While it is known that the transmission efficiency of AA amyloidosis between different species is lower than that among the same species, the mechanism of this species-barrier is unclear. In this study, we found at first that mice orally given a large amount of bovine AA simultaneously with inflammatory stimulation did not develop AA amyloidosis. Therefore, we hypothesized that the low efficiency of the cross-species oral transmission of AA amyloidosis might be due to the low absorption rate in Peyer’s patches. To evaluate the hypothesis, we next investigated whether bovine AA was taken up by Peyer’s patches and translocated to other organs in vivo and ex vivo models. The direct absorption of bovine AA by Peyer’s patches was not observed. Besides, translocation of bovine AA to the mesenteric lymph nodes, spleen, liver, or kidney was not observed except the mesenteric lymph node of a single mouse. Thus, absorption of bovine AA by Peyer’s patches occurred much less efficiently in mouse models of cross-species oral transmission of AA amyloidosis. The present study suggests that the less efficient amyloid uptake by Peyer’s patches may be involved in the species-barrier of oral transmission of AA amyloidosis.     

Treatment of poplar callus with ferulic and sinapic acids I: incorporation and enhancement of lignin biosynthesis

Ferulic acid (FA), tetradeuteroferulic acid (DFA), sinapic acid (SA), or heptadeuterosinapic acid (DSA) was exogenously supplied to poplar (Populus alba L.) callus. Administration of FA or SA increased the lignin content of the callus to about twice that of the control callus. Gas chromatographic analysis of the alkali hydrolysate of the cell wall residue revealed that only a trace amount of SA was bound to the cell wall, and the amount of FA was less than 2% of the total callus lignin. Thioacidolysis of the DFA-treated callus indicated that DFA is effectively converted to both coniferyl and sinapyl alcohols and then incorporated into the corresponding lignin. Incorporation of DSA into syringyl lignin or guaiacyl lignin was not observed, but yields of syringyl lignin thioacidolysis products were markedly increased by DSA treatment of the callus. These results suggest that SA may not be a precursor of sinapyl alcohol and syringyl lignin per se, but it may induce or enhance the biosynthesis of syringyl lignin in poplar callus.     

Structure of cellulose microfibrils and the hydration effect in <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>: a small-angle X-ray scattering study

The nanometer scale structure of cell walls in sugi wood (Cryptomeria japonica D. Don) and the hydration dependence were examined by the small angle X-ray scattering technique. Disk-shaped scattering patterns were observed for sugi wood. The radial average of two-dimensional data from the cross section could supply the scattering intensity with statistical accuracy much higher than that obtained from the sector average of the streak-shaped scattering pattern, and both the scattering intensities provided similar structural information. The scattering patterns from the cross section of the wood are characterized by rhombic or cross-shaped isointensity curves for the lower q region and by circularly symmetric isointensity curves for the higher q region. This shows that the disk-shaped scattering has two different kinds of scattering origins. The microfibril radii in the cell wall were determined by fitting the model scattering function of cylindrical fibrils to the scattering data. Values of 12.3 ± 0.3 and 12.2 ± 0.3 were obtained for the fibril radii of the neighboring earlywood and latewood, respectively, in dry specimens. A drastic structural change of the cell walls was detected with increasing water content from 40% to 100%. A low q rise in the scattering intensities below 0.1^–1 became weak and changed into a flat pattern, and the rhombic isointensity curves changed to cross-shaped patterns in the two-dimensional scattering from the cross section. The calculated radii R increased from 12.2 ± 0.3 to 13.3 ± 0.1.Part of this report was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, Japan, April 2002     

Interspecific variation of photosynthesis and leaf characteristics in canopy trees of five species of Dipterocarpaceae in a tropical rain forest

Photosynthetic rate, nitrogen concentration and morphological properties of canopy leaves were studied in 18 trees, comprising five dipterocarp species, in a tropical rain forest in Sarawak, Malaysia. Photosynthetic rate at light saturation (Pmax) differed significantly across species, varying from 7 to 18 micro mol m(-2) s(-1). Leaf nitrogen concentration and morphological properties, such as leaf blade and palisade layer thickness, leaf mass per area (LMA) and surface area of mesophyll cells per unit leaf area (Ames/A), also varied significantly across species. Among the relationships with leaf characteristics, Pmax had the strongest correlation with leaf mesophyll parameters, such as palisade cell layer thickness (r2 = 0.76, P < 0.001) and Ames/A (r2 = 0.73, P < 0.001). Leaf nitrogen concentration and Pmax per unit area also had a significant but weaker correlation (r2 = 0.46, P < 0.01), whereas Pmax had no correlation, or only weakly significant correlations, with leaf blade thickness and LMA. Shorea beccariana Burck, which had the highest P(max) of the species studied, also had the thickest palisade layer, with up to five or more layers. We conclude that interspecific variation in photosynthetic capacity in tropical rain forest canopies is influenced more by leaf mesophyll structure than by leaf thickness, LMA or leaf nitrogen concentration.     

Estimating individual tree heights of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR

Recently, it was shown that individual tree heights could be accurately estimated using small-footprint airborne light detection and ranging (LiDAR) remote sensing. Because most of the areas studied previously were limited to flat terrain, we investigated the accuracy of LiDAR-derived individual tree height estimates for different types of topographical features in mountainous forests with a steeper and more complex topography. Several middle-aged (40–50 years old) sugi (Cryptomeria japonica D. Don) plantations are found in the mountainous regions in Japan; hence, we chose 48-year-old sugi plantations to investigate the accuracy of these estimates. The surveyed area was divided into three types of topographical features; steep slope (mean slope ± SD; 37.6° ± 5.8°), gentle slope (15.6° ± 3.7°), and gentle yet rough terrain (16.8° ± 7.8°). Before estimating tree heights, the number of detected trees within each topographical feature was researched. In each of these terrains, the percentage of trees detected correctly was 74%, 86%, and 92%; the average error between LiDAR-derived and field-measured tree heights was 0.227m, –0.473m, and –0.183m; and the accuracy of the LiDAR-derived tree height estimates, given as root mean square error (RMSE), was 0.901m, 0.846m, and 0.576m, respectively. Consequently, the procedure presented in this study could detect most canopy trees and estimate individual tree heights with an accuracy better than 1m, even in a forest with a mean slope angle of approximately 38°; thus, indicating that small-footprint airborne LiDAR will be a useful tool for accurately estimating the heights of individual canopy trees in sugi plantations in mountainous areas.     

Lignification and peroxidase in tension wood ofEucalyptus viminalis seedlings

Seedlings ofEucalyptus viminalis were grown for 50 days with their stems bent so tension wood would form. Every 10 days the lignin content, monomeric composition, and peroxidase activity in the tension wood were compared with those in the lower side (opposite wood) and in vertically grown controls. The lignin content in the developing tension wood started to decrease after 10 days of bending and kept decreasing for 50 days, whereas those in control plants and opposite wood remained almost unchanged. The yields of syringaldehyde from tension wood by nitrobenzene oxidation increased, and consequently the syringyl/ guaiacyl ratio of the lignin was higher in tension wood than in opposite wood and control plants. The peroxidase ionically bound to the cell walls (IPO) catalyzed oxidation of guaiacol and syringaldazine. The syringaldazineoxidizing activity of IPO from tension wood increased, whereas the activities of IPO from opposite wood and control plants did not show any marked change. In tension wood the increase in syringaldazine-oxidizing activity of IPO was consistent with an increase in the syringaldehyde yield. This suggests that IPO contributes to syringyl lignin deposition as other enzymes involved in the monolignol biosynthesis do in tension wood formation.This study was presented at the 50th Annual Meeting of the Japan Wood Research Society, Kyoto, April 2000     

The penetration rate of laser pulses transmitted from a small-footprint airborne LiDAR: a case study in closed canopy, middle-aged pure sugi (Cryptomeria japonica D. Don) and hinoki cypress (Chamaecyparis obtusa Sieb. et Zucc.) stands in Japan

Penetration rates of laser pulses transmitted from a small-footprint airborne light detection and ranging (LiDAR) system in closed-canopy, middle-aged (40–50 years old) hinoki cypress (Chamaecyparis obtusa Sieb. et Zucc.) and sugi (Cryptomeria japonica D. Don) plantations that had similar levels of canopy openness were studied. The number of transmitted pulses was 107 427 points/ha for the hinoki cypress stand and 122 883 points/ha for the sugi stand. The penetration rates of the first (P_f) and second pulses (P_s) that reached the ground were 0.1% and 1.0% in the hinoki cypress stand, and 2.6% and 5.5% in the sugi stand, respectively. Penetration rates for the total number of pulses (P_f+s) that reached the ground within each stand were 1.1% and 8.1%, respectively, and values for P_f+s, P_f, and P_s for sugi and hinoki cypress stands were significantly different (P < 0.001). The results of this study indicated that the generation of accurate digital terrain models in dense hinoki cypress stands with complex topographies using only the data from laser pulses with poor laser penetration rates is likely to be difficult.     

The Effect of Colchicine as a Chromosome Doubling Agent for Wheat-Rye Hybrids as Influenced by pH, Method of Application, and Post-Treatment Environment

Hybrids of wheat (Triticum durum) × rye (Secale montanum) (2n = 21) were treated with a 0.06 % solution of colchicine. In the induction of fertile plants, fertile spikes, and seed-set per spike, the root immersion technique was 21.7 %, 14.1 %, and 4.4 % respectively more effective than the use of the inverted vial. Colchicine solutions ranging in pH from 3.5 to 7.5 with the root immersion technique reached the highest frequencies of fertile (or partially fertile) hybrids (77.7 %), and fertile spikes (68.9 %) at a pH 5.5 used for the treatment, although the highest overall percentage of large Q seeds resulted from treatments at low pH (3.5). The overall mean frequency of induced fertile plants was six-fold higher when treated in a growth chamber (19/15 °C day/night temperature and 18 h photoperiod) compared to treatments conducted in a greenhouse. The frequency of euploidy (2n = 42) was found to be highest in the large seed class and lowest, i.e. just about 50 %, in the class of small seeds.     

Applicability of the quantification of genetically modified organisms to foods processed from maize and soy

The applicability of quantifying genetically modified (GM) maize and soy to processed foods was investigated using heat treatment processing models. The detection methods were based on real-time quantitative polymerase chain reaction (PCR) analysis. Ground seeds of insect resistant GM maize (MON810) and glyphosate tolerant Roundup Ready (RR) soy were dissolved in water and were heat treated by autoclaving for various time intervals. The calculated copy numbers of the recombinant and taxon specific deoxyribonucleic acid (DNA) sequences in the extracted DNA solution were found to decrease with time. This decrease was influenced by the PCR-amplified size. The conversion factor (Cf), which is the ratio of the recombinant DNA sequence to the taxon specific DNA sequence and is used as a constant number for calculating GM% at each event, tended to be stable when the sizes of PCR products of two DNA sequences were nearly equal. The results suggested that the size of the PCR product plays a key role in the quantification of GM organisms in processed foods. It is believed that the Cf of the endosperm (3n) is influenced by whether the GM originated from a paternal or maternal source. The embryos and endosperms were separated from the F1 generation seeds of five GM maize events, and their Cf values were measured. Both paternal and maternal GM events were identified. In these, the endosperm Cf was lower than that of the embryo, and the embryo Cf was lower than that of the endosperm. These results demonstrate the difficulties encountered in the determination of GM% in maize grains (F2 generation) and in processed foods from maize and soy.     

Effects of fertilization, crop year, variety, and provenance factors on mineral concentrations in onions

Mineral concentrations of onions (Allium cepa L.) grown under various conditions, including factors (fertilization, crop year, variety, and provenance), were investigated to clarify how much each factor contributes to the variation of their concentrations. This was because the mineral concentrations might be affected by various factors. The ultimate goal of this study was to develop a technique to determine the geographic origins of onions by mineral composition. Samples were onions grown under various conditions at 52 fields in 18 farms in Hokkaido, Japan. Twenty-six elements (Li, Na, Mg, Al, P, K, Ca, Mn, Fe, Co, Ni, Cu, Zn, Rb, Sr, Y, Mo, Cd, Cs, Ba, La, Ce, Nd, Gd, W, and Tl) in these samples were determined by inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry. Fertilization conditions and crop years of onions caused variations of P, Ni, Cu, Rb, Sr, Mo, Cs, and Tl concentrations in onions; different onion varieties also showed variations in numerous element concentrations. However, the variations of mineral compositions of onions by these factors were smaller than the differences between production places with a few exceptions. Furthermore, Na, Rb, and Cs in group IA of the periodic table, Ca, Sr, and Ba in group IIA, and Zn and Cd in group IIB showed similar concentration patterns by group; this result demonstrated that elements in the same periodic groups behaved similarly in terms of their absorption in onions.