Influence of crop establishment methods on yield,economics and water productivity of rice cultivars under upland and lowland production ecologies of Eastern Indo-Gangetic Plains

A field study on assessment of crop establishment methods on yield, economics and water productivity of rice cultivars under upland and lowland production ecologies was conducted during wet seasons (June–November) of 2012 and 2013 in Eastern Indo-Gangetic Plains of India. The experiment was laid-out in a split-plot design (SPD) and replicated four times. The main-plot treatments included three crop establishment methods, viz. dry direct-seeded rice (DSR), system of rice intensification (SRI) and puddled transplanted rice (PTR). In sub-plots, five rice cultivars of different groups like aromatic (Improved Pusa Basmati 1 and Pusa Sugandh 5), inbreds (PNR 381 and Pusa 834) and hybrid (Arize 6444) were taken for their evaluations. These two sets of treatments were laid-out simultaneously in two production ecologies, upland and lowland during both years. In general, lowland ecology was found favourable for rice growth and yield and resulted in 13.2% higher grain yield as compared to upland ecology. Rice grown with SRI method produced 19.4 and 7.0% higher grain yield in 2012 and 20.6 and 7.1% higher in 2013, over DSR and PTR. However, PTR yielded 13.1 and 14.5% higher grain over DSR during 2012 and 2013, respectively. On an average, Arize 6444 produced 26.4, 26.9, 28.9 and 54.7% higher grain yield as compared to PS 5, P 834, PNR 381 and IPB1, respectively. Further, the interaction of production ecologies × crop establishment methods revealed that, in upland ecology, SRI recorded significantly higher grain yield as compared to PTR and DSR, but in lowland, grain yield resulting from SRI was similar to the yield obtained with PTR and significantly higher than DSR. The latter two methods (PTR and DSR) yielded alike in lowland ecology in both study years. The production ecologies × crop establishment methods × cultivars interaction on grain yield showed that the growing of Arize 6444 cultivar using SRI method in upland ecology resulted in the higher grain yield (8.87 t/ha). But the cost of production was also highest in SRI followed by PTR and DSR across production ecologies and cultivars. Cultivation of hybrid (Arize 6444) involved higher cost of production than all other cultivars. Irrespective of crop establishment methods and cultivars, gross returns, net returns and B:C ratio were significantly higher in lowland compared to upland ecology. Owing to higher grain yield, SRI method fetched significantly higher gross returns and net returns over PTR and DSR. Average increase in net return with Arize 6444 was 68.8, 41.0, 37.7 and 33.1% over IPB 1, PNR 381, P 834 and PS 5, respectively. There was a saving of 30.7% water in SRI and 19.9% in DSR over PTR under upland ecology. Similarly in lowland ecology, water saving of 30.2% was observed in SRI and 21.2% in DSR over PTR. Due to higher yield and saving on water, SRI returned significantly higher total water productivity (TWP) (5.9 kg/ha-mm) as compared to DSR (3.5 kg/ha-mm) and PTR (3.6 kg/ha-mm) under upland ecology. In lowland ecology, also SRI (6.2 kg/ha-mm) resulted in higher TWP as compared to other two methods. However, DSR gave significantly higher TWP as compared to PTR. Among cultivars, hybrid Arize 6444 recorded the highest TWP in both upland and lowland production ecologies across crop establishment methods. Hence, growing of hybrid Arize 6444 with SRI method can enhance rice productivity and water-use efficiency in lowland and upland production ecologies of Eastern Indo-Gangetic Plains and in other similar regions.     

Processing of maize germ oil cake into edible food grade meal and evaluation of its protein quality

The commercial oil cake produced during expeller pressing of maize germ, was extracted with n-hexane and 80 percent ethanol followed by seiving to remove undesirable materials. In defatted maize germ oil cake (DMGOC): protein, starch, fat, crude fiber (CF) and ash were respectively 24.69, 36.55, 5.68, 7.56 and 3.90 percent and they decrease after processing except ash, which increased slightly. It contains better quality protein having only 3 percent zein and 47 percent albumin. Its amino acids like lysine and tryptophan and biological value (BV) were higher than that of whole maize grain, and was comparable with that of the amino acid requirement of preschool children and casein diets both. Its digestible energy (DE) was lower compared with whole maize grain as well as the casein diets. After processing albumin, globulin and zein decreased whereas glutelin and the residual fraction increased. Not much differences were observed in chemical composition and different amino acids, in vitro protein digestibility (IVPD), true digestibility (TD), BV and DE improved after processing.     

Adoption and Impact of Modern Rice Varieties on Poverty in Eastern India

The factors affecting the adoption of modern varieties(MVs) of rice and impact on poverty in Odisha, India were discussed. A total of 363 households from Cuttack and Sambalpur districts of Odisha via multistage sampling technique participated in the survey. The Cragg's Double hurdle model was used to model the determinants of adoption and intensity of adoption of MVs of rice, and the propensity score matching was used to analyze the impact of adoption on poverty. The results showed that age, education, risk aversion, land size, yield, perception of MVs as high yielding, resistant to diseases and availability of MVs positively influenced the decision to adopt. However, variables such as household size, experience of a farmer, off-farm job participation, amount of credit received, cost of seeds, insecticides and fertilizers negatively influenced the adoption of MVs. Intensity of adoption of MVs was negatively influenced by experience of a farmer, cost of fertilizer and marketability of MVs, and positively affected by household size, risk aversion, land size, cost of insecticides, perception of MVs as high yielding and availability of MV seeds. Poverty incidence, gap and severity were high among non-adopters to adopters of MVs. After matching adopters and non-adopters of MV groups using four different algorithms of nearest neighbour matching, stratification matching, radius matching and kernel matching, the impact of MV adoption resulted in higher per capita monthly household expenditure by about US$ 52.82 to US$ 63.17.     

Comparative analysis of mechanical properties of size film. I. Performance of individual size materials

Starch has been the most popular and economic size material. Synthetic binders have also been developed to be used as size material to improve weaving loom efficiency. Some synthetic size materials have got restrictions in use mainly because of ecological reasons. In the recent years, many modifications have come up in the starch as a sizing agent. Different modification can give different properties, which can be suited for a particular application. In the present study, for comparative analysis of different varieties of natural starch, modified starch and synthetic size material have been evaluated and mechanical properties like cohesion power, adhesion power, abrasion resistance, bending rigidity etc. were studied. PVA shows best properties among all size material. Among modified starch, starch ester shows better properties.     

Combining ability and inheritance studies for protein content in mungbean

The present investigation was carried on a 8 parent diallel of mungbean involving 28 F₁'s and 28 F₂'s excluding reciprocals grown at three different locations including Meerut, Ludhiana and Hissar. Three different analyses including combining ability, graphical and component analysis were utilized.From the combining ability analysis over different environments it was reported that g.c.a. effects are relatively more consistent over environments than s.c.a. effects. The parents P₃ and P₅ were ranked as the best general combiners and the cross P5 × P7 was the good specific combination in both the diallel sets. The graphical analysis suggested that high protein content is governed by dominant genes. Further all the analyses revealed that non-additive variance was mostly responsible for this character. Thus two methods, including biparental mating system among the selected F₂/F₃ plants from P₅×P₇ cross; and modified diallel selective mating system for the selected parents with good or average general combining ability were suggested. From these populations the desirable combinations with high protein content and other desirable attributes, be selected which can constitute a future variety.     

Technological Advances to Address Current Issues in Entomology: 2020 Student Debates

The 2020 Student Debates of the Entomological Society of America (ESA) were live-streamed during the Virtual Annual Meeting to debate current, prominent entomological issues of interest to members. The Student Debates Subcommittee of the National ESA Student Affairs Committee coordinated the student efforts throughout the year and hosted the live event. This year, four unbiased introductory speakers provided background for each debate topic while four multi-university teams were each assigned a debate topic under the theme ‘Technological Advances to Address Current Issues in Entomology’. The two debate topics selected were as follows: 1) What is the best taxonomic approach to identify and classify insects? and 2) What is the best current technology to address the locust swarms worldwide? Unbiased introduction speakers and debate teams began preparing approximately six months before the live event. During the live event, teams shared their critical thinking and practiced communication skills by defending their positions on either taxonomical identification and classification of insects or managing the damaging outbreaks of locusts in crops.     

Characterization of oil palm empty fruit bunch and glass fibre reinforced recycled polypropylene hybrid composites

The effects of hybridization of glass fibre on oil palm empty fruit bunch (EFB) and recycled polypropylene-based composites are described in this paper. The compounding process involved extrusion followed by injection moulding technique to prepare the samples for characterizations. Fibre loading were considered as 40 % of the total weight of the blends and EFB:glass fibre ratio was maintained as 30:70, 50:50, 70:30 and 90:10. Two types of coupling agents of maleic anhydride-grafted polypropylene such as polybond-3200 and fusabond P-613 of different molecular weight and maleic anhydride level were used to improve the interfacial adhesion between the fibres and the matrix. Composites were characterized by density, melt flow index, tensile, Izod impact and flexural testing. Morphological images of the fractured surfaces of the composites were examined by field-emission scanning electron microscopy. Samples were also characterized by thermal tests such as thermogravimetric analysis and differential scanning calorimetry to evaluate the thermal and crystalline properties, respectively. Optimization of hybridization of the fibres and effect of coupling agents were evaluated in terms of various properties of the samples. The composite prepared with EFB:glass fibre ratio of 70:30 showed better reinforcing properties than that of others.     

Molecular genetic mapping of quantitative trait loci associated with loaf volume in hexaploid wheat (Triticum aestivum)

Major efforts in wheat research are being made to improve the yield and quality of wheat. Loaf volume (Lv) is the main quality parameter deciding the bread making potential of wheat. To genetically dissect quantitative trait loci (QTLs) for Lv, a Recombinant Inbred Line (RIL) population (F₈) was developed from a cross between two Indian wheat varieties “HI 977” and “HD 2329”. A total of 914 SSR and 100 ISSR primers were used for molecular analysis and the genetic map comprising 19 chromosomes was constructed with 202 SSR markers and 2 HMW glutenin subunit loci: Glu-B1 and Glu-D1. The phenotypic data were collected from six environments including three different agro-climatic zones for 2 consecutive years. Dissection of Lv through AMMI model revealed significant G×E variance for the trait. QTL analysis was performed using composite interval mapping. A total of 30 QTLs for Lv were detected and significant QTLs were identified on 6B and 6D chromosomes; 1B, 1D, 2A, 3A, 5B and 5D also contributed genetically to Lv. Association between 6B and 6D QTLs and variable expression of gliadins on group 6 chromosomes were discussed. QTLs detected in this study were compared with other QTL analysis in wheat.     

Influence, optimization, energy budgeting and monetary considerations of different time intervals between fungicidal seed treatment and sowing on Sclerotium blight of soybean

Soybean (Glycine max (L.) Merrill) is susceptible to the fungal pathogen, Sclerotium rolfsii from seedling emergence to pod fill. A few systemic and non-systemic fungicides have been recommended as pre-sowing seed treatment (ST) for the management of Sclerotium blight of soybean worldwide. But farmers, especially in developing countries do not utilize ST mainly on account of preoccupation in other practices considered by them essential for sowing. The possibility of ST applied well in advance of sowing was therefore investigated. Results indicated that ST on average increased field emergence by 26.19%, reduced post-emergence mortality (POM) by 49.03% and enhanced seed yield by 23.00%. Seed treatment with carboxin 37.5% + thiram 37.5% @ 0.2% was the best. Seed treatment 50 days prior to sowing was superior by increasing emergence, reducing POM and enhancing seed yield with high monetary returns and energy output.