Placotylene A,an Inhibitor of the Receptor Activator of Nuclear Factor-κB Ligand-Induced Osteoclast Differentiation,from a Korean Sponge Placospongia sp.

A new inhibitor, placotylene A (1), of the receptor activator of nuclear factor-κB ligand (RANKL)-induced osteoclast differentiation, and a regioisomer of placotylene A, placotylene B (2), were isolated from a Korean marine sponge Placospongia sp. The chemical structures of placotylenes A and B were elucidated on the basis of 1D and 2D NMR, along with MS spectral analysis and revealed as an iodinated polyacetylene class of natural products. Placotylene A (1) displayed inhibitory activity against RANKL-induced osteoclast differentiation at 10 μM while placotylene B (2) did not show any significant activity up to 100 μM, respectively.     

Giant piezoelectricity on Si for hyperactive MEMS

Microelectromechanical systems (MEMS) incorporating active piezoelectric layers offer integrated actuation, sensing, and transduction. The broad implementation of such active MEMS has long been constrained by the inability to integrate materials with giant piezoelectric response, such as Pb(Mg(1/3)Nb(2/3))O(3)-PbTiO(3) (PMN-PT). We synthesized high-quality PMN-PT epitaxial thin films on vicinal (001) Si wafers with the use of an epitaxial (001) SrTiO(3) template layer with superior piezoelectric coefficients (e(31,f) = -27 ± 3 coulombs per square meter) and figures of merit for piezoelectric energy-harvesting systems. We have incorporated these heterostructures into microcantilevers that are actuated with extremely low drive voltage due to thin-film piezoelectric properties that rival bulk PMN-PT single crystals. These epitaxial heterostructures exhibit very large electromechanical coupling for ultrasound medical imaging, microfluidic control, mechanical sensing, and energy harvesting.     

Docosahexaenoic Acid Is Naturally Concentrated at the sn-2 Position in Triacylglycerols of the Australian Thraustochytrid Aurantiochytrium sp. Strain TC 20

The Labyrinthulomycetes or Labyrinthulea are a class of protists that produce a network of filaments that enable the cells to glide along and absorb nutrients. One of the main two Labyrinthulea groups is the thraustochytrids, which are becoming an increasingly recognised and commercially used alternate source of long-chain (LC, ≥C₂₀) omega-3 containing oils. This study demonstrates, to our knowledge for the first time, the regiospecificity of the triacylglycerol (TAG) fraction derived from Australian thraustochytrid Aurantiochytrium sp. strain TC 20 obtained using ¹³C nuclear magnetic resonance spectroscopy (¹³C NMR) analysis. The DHA present in the TC 20 TAG fraction was determined to be concentrated in the sn-2 position, with TAG (16:0/22:6/16:0) identified as the main species present. The sn-2 preference is similar to that found in salmon and tuna oil, and differs to seal oil containing largely sn-1,3 LC-PUFA. A higher concentration of sn-2 DHA occurred in the thraustochytrid TC 20 oil compared to that of tuna oil.     

Effects of silver content and morphology on the catalytic activity of silver-grafted titanium oxide nanostructure

As titanium oxide is a well-known photocatalyst, we investigated the effects of silver content and nanostructural morphology on the photocatalytic degradation of two dyes, methylene blue and rhodamine B. Two nano-formulations were utilized, including nanofibers and nanoparticles. Silver-grafted titanium oxide nanofibers were synthesized using the electrospinning of silver nitrate/titanium isopropoxide/poly(vinyl acetate) sol-gel. The nanoparticulate form was obtained by calcination of a ground powder prepared from the same electrospun sol-gel. The results affirmed the advantage of the silver-grafted titanium oxide nanostructures over the silver-free ones. Increasing the silver content in the nanofibers led to increases in their surface area, which is an important parameter in heterogeneous catalytic chemical reactions. Therefore, the results strongly suggest the use of silver-grafted titanium oxide in a nanofibrous form. These results further support utilizing Agloaded titanium oxide nanofibers as a photocatalyst.     

Isolation of Nanocellulose from Water Hyacinth Fiber (WHF) Produced via Digester-Sonication and Its Characterization

The successful isolation and characterization of water hyacinth fiber (Eichornia crassipes) (WHF) nanocellulose is presented in this study. The novelty was in exploring a wider range of properties of highly purified samples of WHF after each stage of production in more depth. The isolation was accomplished by pulping in a digester and sonication. Morphological changes before and after treatment were demonstrated by scanning electron microscopy (SEM). The lignin and hemicellulose content decreased during chemical treatment. Transmission electron microscopy (TEM) and particle size analyzer (PSA) were used to determine the morphology of WHF after sonication for 1 h. TEM shows that the diameter and length of nanocellulose WHF were 15.61 and 147.4 nm, respectively. The crystallinity index and crystalline domain area significantly increased after chemical treatment. The highest crystallinity index was 84.87 % after an acid hydrolysis process. The increase in crystallinity leads to good thermal stability. Moisture absorption tests of WHF were carried out before and after treatment. The lowest moisture absorption was in the cellulose fiber after sonication (nanocellulose).     

Effect of pineapple protease on the characteristics of protein fibers

A pineapple protease, bromelain, was used to improve the dyeing properties of protein fibers such as wool and silk. The optimal condition for the activity of the pineapple protease was about 60 °C at pH 7. The wool and silk were treated with the protease extracted from a pineapple and the K/S values of the dyed wool and silk were measured using a spectrophotometer in order to compare the dye uptake. The protease treatment enhanced the dyeing properties of protein fibers without severe changes in mechanical properties. The surface appearances of protease-treated fibers were observed by microscopy.     

Development of a platform for realistic garment drape simulation

An integrated platform for garment drape simulation system has been developed. In this system, garment patterns from conventional two-dimensional CAD systems can be assembled into a three-dimensional garment on a parametrically resizable realistic human body model. A fast and robust particle-based physical calculation engine has been developed for garment shape generation. Then a series of geometric and graphical techniques were applied to create realistic impressions on simulated garments. This system can be used as the rapid prototyping tool for garments in the future quick-response system.     

Effect of Chelated Vanadium Spray on Concentration of Vanadium and Organic Compounds in Tea Shoots

The study aimed to develop vanadium tea products and evaluated the potential of chelated vanadium （V） absorption by tea shoots and effect of vanadium accumulation on tea quality during the first crop season.Chelated V application with three times foliar sprays at 5 days intervals starting from 15 days before plucking showed a significant increase in V content of new young shoots,which was much effective at higher concentration.However,one or two times sprays had no increase in V content regardless of spray concentration compared to non-treated.Despite V accumulation in the treated at 3 to 9 times higher that of than the non-treated plants,there were no significant changes in contents of total amino acids,theanine,caffeine,total polyphenols,crude fiber,and cathechins between the treated and the non-treated.     

Thermal characteristics of basalt fiber reinforced epoxy-benzoxazine composites

This study investigates the possibility of utilizing basalt chopped fiber in order to prepare a thermally stable fiber reinforced composite. Bi-component resin system using epoxy and benzoxazine monomer is proposed and its cure characteristic is evaluated by FT-IR and DSC. Copolymerization of epoxy resin upon curing with benzoxazine is carried out in the absence of a strong catalyst. Through the evaluation of T _g of the epoxy-benzoxazine copolymer resin and its composite, it is clear that the incorporation of basalt fiber in composite has a great role and advantage. Also, this study systematically evaluates the apparent char yield and net char yield gain of the composites using TGA thermograms. Based on the results of DSC and TGA, it is advised that the favorable composite composition can be prepared from the range of 20 % to 50 % of epoxy content with 10 % of basalt fiber.     

Panax ginseng extract rich in ginsenoside protopanaxatriol attenuates blood pressure elevation in spontaneously hypertensive rats by affecting the Akt-dependent phosphorylation of endothelial nitric oxide synthase

Nitric oxide (NO) produced by endothelial nitric oxide synthase (eNOS) is a fundamental regulator of systemic blood pressure. Ginsenosides from Panax ginseng have been investigated in vitro for the molecular and biochemical mechanisms by which they stimulate NO release in vascular endothelial cells; however, little research has been done to confirm the physiological relevance of these in vitro studies. To address this research gap, the effects of a P. ginseng extract rich in ginsenosides from protopanaxatriol on spontaneously hypertensive rats (SHRs) was examined. Ginseng extract administration stimulated nongenomic Akt-mediated eNOS activation, enhanced NO production, improved vessel wall thickening, and alleviated hypertension in SHRs, confirming the physiological relevance of previous in vitro studies with ginsenosides.