Preparation and properties of antibacterial Poly(vinyl alcohol) nanofibers by nanoparticles

Poly(vinyl alcohol) (PVA)/Ag-zeolite nanofiber webs were prepared with different concentrations of Ag-zeolite nanoparticles by the electrospinning technique. Scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM), Fourier transform-infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Instron, and antibacterial activities analysis were utilized to characterize the morphology and properties of the PVA/Ag-zeolite nanofiber webs. The study results showed that the polymer concentration, applied voltages and tip-to-collector distances were the main factors influencing the morphology of the electrospun nanofiber webs. The introduction of Ag-zeolite nanoparticles improved the mechanical properties and thermal stability of the PVA nanofiber webs. TEM data demonstrated that the Ag-zeolite nanoparticles were well distributed within the nanofiber. FTIR revealed a possible interaction between the PVA matrix and the Ag-zeolite nanoparticles. These fibers showed an antibacterial efficacy of 99.8 % and over against Staphylococcus aureus and Klebsiella pneumoniae at Ag-zeolite concentrations of 1 % and over, because of the presence of the silver nanoparticles in the zeolite.     

Flame retarding PC/ABS resins having superior thermomechanical properties

Triphenyl phosphate (TPP) is well known to be one of the most effective flame retardants for acrylonitrile-butadiene-styrene copolymer (ABS) and its blending resins, such as polycarbonate (PC)/ABS, among various phosphorous-based compounds. However, TPP can also play a role as a plasticizer, which decreases the mechanical properties of PC/ABS resins at high temperature. Furthermore considerable amount of TPP has to be evaporated during molding process due on its much lower evaporation temperature. To overcome these shortcomings, we tried to immobilize TPP by grafting on butadiene moiety of ABS. FT-IR analysis of prepared TPP-grafted ABS (ABS-g-TPP) comparing with TPP, ABS and their blend confirmed that chemical reactions happened between TPP and ABS resins and it was attributed to the graft reaction of TPP onto butadiene moieties. Prepared ABS-g-TPP resins were blended with PC at various compositions to be prepared as testing specimens by injection molding. The physical characteristics such as mechanical properties, thermal stability, and flame retarding properties of the PC/ABS-TPP graft copolymer were analyzed through Vicat softening temperature, IZOD impact strength, transmission electron microscope, and UL94 flame retardation tests. Results showed that PC/ABS-g-TPP resin takes better thermomechanical properties than the existing PC/ABS resins at relatively low additional TPP amounts.     

Rheological behavior of magnetic carbon nanotubes and their application as kevlar coating

Carbon nanotube (CNT)/magnetite (Fe₃O₄) nanocomposites were successfully fabricated by nanocoating. When the CNT/Fe₃O₄ nanocomposites were added to a carbonyl (CI) based magnetorheological fluid (MRF), the magnetic rheological properties of the MRF were enhanced. Such enhancement in magnetic rheological properties of the CI-CNT/Fe₃O₄ MRF is considered to be attributable to both the superparamagnetic property of the magnetic layer covering the CNT surface and the high length to diameter ratio of the CNT/Fe₃O₄ nanocomposite. Impact properties for CI-CNT/Fe₃O₄ MRF treated Kevlar fabrics were also tested, and improved impact properties were observed with external magnetic fields compared to CI-MRF treated Kevlar fabrics.     

A grid-based rainfall-runoff model for flood simulation including paddy fields

A grid-based, KIneMatic wave STOrm Runoff Model (KIMSTORM) is described. The model adopts the single flow-path algorithm and routes the water balance during the storm period. Manning’s roughness coefficient adjustment function of the paddy cell was applied to simulate the flood mitigation effect of the paddy fields for the grid-based, distributed rainfall-runoff modeling. The model was tested in 2296 km² dam watershed in South Korea using six typhoon storm events occurring between 2000 and 2007 with 500 m spatial resolution, and the results were tested through the automatic model evaluation functions in the model. The average values of the Nash–Sutcliffe model efficiency (ME), the volume conservation index (VCI), the relative error of peak runoff rate (EQ_p), and the absolute error of peak runoff (ET_p) were 0.974, 1.016, 0.019, and 0.45 h for calibrated storm events and 0.975, 0.951, 0.029, and 0.50 h for verified storm events, respectively. In the simulation of the flood mitigation effect of the paddy fields, the average values of the percentage changes for peak runoff, total runoff volume, and time to peak runoff were only −1.95, −0.93, and 0.19%, respectively.     

Dithiosquarylium-based colorimetric sensors for Hg<Superscript>2+</Superscript>

A new Hg²⁺-selective chemosensor based on dithiosquarylium (DTSQ) dye was investigated. Among various metal cations tested, exclusively Hg²⁺ ion responses to irreversible color change of DTSQ-1, along with the Hg²⁺-triggered desulfurization of dithiosquarylium into its oxygen analogue squarylium (SQ) dye.     

Effect of citral,eugenol, nerolidol and α-terpineol on the ultrastructural changes of Trichophyton mentagrophytes

The antifungal effects of citral, eugenol, nerolidol and α-terpineol on Trichophyton mentagrophytes were investigated. Citral over 0.1 mg/ml strongly inhibited the hyphal growth of T. mentagrophytes, and the antifungal activity of α-terpineol was less effective. The morphological changes of the fungus exposed to the terpenes were observed by electron microscopy. The hyphae were distorted and collapsed at 0.2, 0.4 and 1 mg/ml of eugenol, nerolidol and α-terpineol respectively, and cell membrane and organelles were irreversibly damaged at 0.2 mg/ml citral.     

Influences of forest tending works on carbon distribution and cycling in a Pinus densiflora S. et Z. stand in Korea

This study was conducted to determine carbon (C) dynamics following forest tending works (FTW) which are one of the most important forest management activities conducted by Korean forest police and managers. We measured organic C storage (above- and below-ground biomass C, forest floor C, and soil C at 50 cm depth), soil environmental factors (soil CO₂ efflux, soil temperature, soil water content, soil pH, and soil organic C concentration), and organic C input and output (litterfall and litter decomposition rates) for one year in FTW and non-FTW (control) stands of approximately 40-year-old red pine (Pinus densiflora S. et Z.) forests in the Hwangmaesan Soopkakkugi model forest in Sancheonggun, Gyeongsangnam-do, Korea. This forest was thinned in 2005 as a representative FTW practice. The total C stored in tree biomass was significantly lower (P < 0.05) in the FTW stand (40.17 Mg C ha⁻¹) than in the control stand (64.52 Mg C ha⁻¹). However, C storage of forest floor and soil layers measured at four different depths was not changed by FTW, except for that at the surface soil depth (0–10 cm). The organic C input due to litterfall and output due to needle litter decomposition were both significantly lower in the FTW stand than in the control stand (2.02 Mg C ha⁻¹ year⁻¹ vs. 2.80 Mg C ha⁻¹ year⁻¹ and 308 g C kg⁻¹ year⁻¹ vs. 364 g C kg⁻¹ year⁻¹, respectively, both P < 0.05). Soil environmental factors were significantly affected (P < 0.05) by FTW, except for soil CO₂ efflux rates and organic C concentration at soil depth of 0–20 cm. The mean annual soil CO₂ efflux rates were the same in the FTW (0.24 g CO₂ m⁻² h⁻¹) and control (0.24 g CO₂ m⁻² h⁻¹) stands despite monthly variations of soil CO₂ efflux over the one-year study period. The mean soil organic C concentration at a soil depth of 0–20 cm was lower in the FTW stand (81.3 g kg⁻¹) than in the control stand (86.4 g kg⁻¹) but the difference was not significant (P > 0.05). In contrast, the mean soil temperature was significantly higher, the mean soil water content was significantly lower, and the soil pH was significantly higher in the FTW stand than in the control stand (10.34 °C vs. 8.98 °C, 48.2% vs. 56.4%, and pH 4.83 vs. pH 4.60, respectively, all P < 0.05). These results indicated that FTW can influence tree biomass C dynamics, organic C input and output, and soil environmental factors such as soil temperature, soil water content and soil pH, while soil C dynamics such as soil CO₂ efflux rates and soil organic C concentration were little affected by FTW in a red pine stand.     

Changes in anthocyanin and isoflavone concentrations in black seed-coated soybean at different planting locations

This study assessed the altitudinal variations in the anthocyanin and isoflavone contents of six black seed coated soybean [Glycine max (L.) Merrill] cultivars. The black soybean cultivars Heugcheong, Seonheuk, Geomjeong 1, Geomjeong 2, Cheongja 2, and Cheongja 3 were planted at Milyang (12 m above mean sea level — low altitude) and Muju (600 m — high altitude), Korea on 10 June 2005 and 2006. The total anthocyanin and isoflavone contents and individual components were investigated by reverse-phase high performance liquid chromatography (HPLC). All black soybean cultivars cultivated in high altitude possessed significantly higher total anthocyanin (p < 0.01) and isoflavone (p < 0.01) contents than those grown in low altitude. For anthocyanin composition, cyanidin-3-O-glucoside, cyanidin-3-O-galactoside, and peonidin-3-O-glucoside contents were significantly higher while delphinidin-3-O-glucoside contents was significantly lower at high altitude. The composition of individual isoflavones, 6″-O-malonyldaidzin, and 6″-O-malonylgenistin contents significantly increased at high altitude.     

Methyl jasmonate alleviated salinity stress in soybean

We studied the role of methyl jasmonate (MeJA) in alleviating NaCl-induced salt stress on soybean growth and development in hydroponics medium. Soybean seedlings were exposed to 60 mM NaCl stress for 2 weeks, 24 h after the application of 20 and 30 μM MeJA. NaCl stress induced a significant reduction in plant growth, endogenous bioactive gibberellin (GA4), photosynthesis and transpiration rate, while a marked increase in the endogenous abscisic acid (ABA) and proline contents were recorded. MeJA application greatly mitigated the adverse effects of NaCl on soybean growth and endogenous hormones. MeJA significantly increased ABA levels, while the endogenous amount of GA4 was reduced by the application of NaCl. Our study revealed that MeJA counteracted the negative effects of NaCl stress on plant growth, chlorophyll content, leaf photosynthetic rate, leaf transpiration rate, and proline content.     

Starch properties of native foxtail millet, Setaria italica Beauv.

Properties of foxtail millet (Setaria italica Beauv.) starches have been studied. Amylose content ranged between 3.3 and 11.4%. Starch content was from 67.5 to 68.7%. The onset temperature (To) of all samples ranged from 66.4 to 69.6°C, peak temperature (Tp) ranged 71.0 to 74.2°C, and their gelatinization enthalpy varied from 0.44 to 8.22 J/g, respectively. A highest gelatinization temperature was obtained for Bongseongjaerae (69.6°C). The enthalpy of the gelatinization (Δ H _gel ) was highest in Andongjaerae. The highest peak, highest breakdown, very high final viscosity, and very low setback were noted in Jucheonjaerae. The starch granule sizes ranged 10.1–25.0 in length and 4.7–12.5μm in diameter. X-ray diffraction angles indicated that all starch samples possess a typical A-type crystallinity.