水平圆盘精密排种器新型推刮种器

从水平圆盘精密排种器的工作原理出发，分析了现有推刮种器影响排种精度和导致种子破碎的原因，设计了新型滚珠式推刮种器。台架和田间试验结果表明，设计的推刮种器能降低种子破碎率并提高排种性能指标。     

温室分层土壤条件下滴头流量和间距对湿润体的影响

基于温室田间土壤大多容重分层和不均匀的特点,进行了原状分层、分层筛分均质和筛分均质3种土壤对湿润体影响的对比研究。试验地土壤为粉土(中国制分类),原状分层和分层筛分均质土壤0~20 cm容重为1.44 g/cm3,20~40 cm为1.63 g/cm3,40~60 cm为1.55 g/cm3,筛分均质土壤采用0~60 cm平均容重1.54 g/cm3。滴头流量设2.7 L/h和1.4 L/h二种,滴头间距有30,50,70,100 cm四种,采用剖面法观测土壤含水率和湿润体发展。试验结果表明:①湿润体在现场原状分层土壤、分层均质和均质土壤中有很大的区别,分层筛分均质和筛分均质土壤中均为碗状原状,而分层土壤的湿润体形状在灌水量较小时为碗状,随灌水时间的延长,其形状逐渐变为椭柱体;②土壤容重分层情况对湿润锋的运移影响很大,分层土壤由于20~40 cm容重较大纵向湿润锋发展缓慢,灌水历时8 h时最大纵向湿润锋分别为27 cm和25 cm,且原状分层土壤灌水量较大时出现0 cm深度处横向湿润锋小于-7~-13 cm深度处湿润锋现象;而筛分均质土壤中纵向湿润锋明显大于分层土壤,灌水历时8 h时最大纵向湿润锋为32 cm;③原状分层土壤湿润体内平均含水率高于分层筛分均质和筛分均质土壤,但各组均高于田持,土壤含水率均匀度均在82%以上。基于这种结果,建议设计湿润比应根据温室土壤特点和设计灌水量进行现场测试确定,这样更符合实际情况。     

粳型杂种稻米品质性状的表现及遗传控制

研究了由4个不育系及其保持系与7个恢复系配组的24个粳型杂种的9个品质性状的遗传表现 , 结果表明： (1)杂种粳米的品质性状表现普遍介于双亲之间, 但粒宽和直链淀粉含量有 较多的超高亲组合, 糙米率和精米率有较多的超低亲组合。 (2)杂种的整精米率、 粒长、 粒宽、 垩白率、 糊化温度5个性状与不育系呈显著正相关; 糙米     

不同类型水稻品种的产量与食味品质的关系比较

本试验采用辽宁省近年来主栽的13个水稻品种为试验材料,研究不同类型水稻品种的产量与品质间的差异和相互关系,以期为高产优质栽培及育种提供理论基础.结果表明:不同类型水稻品种的产量为:密穗型>中间型>散穗型.密穗型品种的成粒数、总颖花数均高于散穗型品种.密穗型品种的食味值高于散穗型品种;密穗型品种的蛋白质含量低于散穗型品种.着粒密度8.5～9.2粒/cm,320万～330万穗/hm2,每穗颖花数150～170个,成粒数达125～150粒/穗,产量和食味品质均能达到较高水平,因此,中间类型品种具有更高产优质的潜力.     

黄瓜根腐病致病病原的鉴定

在天津市及周边地区采集病株进行组织分离，同时分离到两类病原菌，经初步的生物学特性鉴定表明，引起黄瓜根腐病的主要病原菌为甜瓜疫霉、尖孢镰刀菌和茄病镰刀菌。经接种试验，认为甜瓜疫霉为主要致病菌。     

Effects of fruit bagging on coloring and related physiology,and qualities of red Chinese sand pears during fruit maturation

Red Chinese sand pears (Pyrus pyrifolia Nakai) are particular to China. In order to determine the effects of fruit bagging treatments (including bag types, bag removal patterns and dates) on fruit qualities and to understand the mechanism of coloring of red Chinese sand pears, two experiments were carried out. In the first experiment, fruit of ‘Meirensu’ were firstly covered by light-impermeable paper bags with different levels of light permeable liners during their early development stage, then, the whole bag were/not removed or only the outer layer of bags were removed 3, 2 or 1 weeks before harvest. Thus, the fruit were/not totally re-exposed or were under different levels of sunlight transmission (80.31% or 34.71%). Non-bagged fruit were used as the control. Bagging treatments significantly affected the concentration of anthocyanin and the visual qualities of pear fruit. Compared to control, fruit re-exposed totally for 2 or 3 weeks accumulated the largest amount of anthocyanin and fruit receiving 80.31% and 34.71% of sunlight for 1–3 weeks could synthesize a little anthocyanin, indicating that high light intensity is imperative for coloring in red Chinese sand pears. Bagging treatments did not affect contents of total soluble sugars, but decreased organic acids contents in fruit. In the second experiment, fruit of ‘Meirensu’ and ‘Yunhongli No. 1’ were covered with only one type of light-impermeable bag during the early development stage and totally re-exposed after the bag removal 15 days before harvest. Fruit were then collected at different intervals to trace the time-course of coloring, and related physiology and inner qualities. With increasing time after the bag removal, the concentration of chlorophyll, carotenoid, flavonoid and total phenols changed little, but the concentration of anthocyanin accumulated extremely fast within 10 days after the bag removal in both cultivars and thereafter kept constant. ‘Yunhongli No. 1’ had higher anthocyanin contents and lower hue angle than ‘Meirensu’, indicating a higher potential of anthocyanin synthesis. After the bag removal, the sucrose contents and PAL activities increased gradually and correlation analysis revealed that they were highly correlated with anthocyanin accumulation in two cultivars. This study suggests that anthocyanin biosynthesis in red Chinese sand pears is a highly light dependent process and modified by genotypes. Based on the current results, in order to obtain red Chinese sand pear fruit with attractive appearance and good inner qualities, fruit must be covered with light-impermeable bags at the early stage of fruit development and the bag should be removed totally at least 10 days before harvest.     

草方格铺设机器人多体动力学仿真与试

采用Pro/E和ADAMS软件相结合的方法,建立了草方格铺设机器人动力学模型,同时探讨了二者联合建模仿真的一般步骤.模型添加必要的边界条件后,对纵向压轮和横向插刀正常动作时的草方格铺设机器人振动状态进行了仿真.通过仿真,得到了牵引车、纵向铺设机构、横向铺设机构、纵向压轮和横向插刀质心的位移、速度以及加速度曲线.分析了这些曲线出现波动的原因,为进一步的优化提供了数据.通过试验,得到实际状态下的试验曲线,并与仿真曲线进行对照,证实了草方格铺设机器人仿真模型和仿真结果的合理性和可靠性.     

温度对“杰兔”兔眼蓝莓花粉活力及柱头可授性的影响

以5年生兔眼蓝莓品种"杰兔"为试材,研究了温度对花粉活力和柱头可授性的影响,在此基础上开展了花粉活力和柱头可授性与温度的回归分析,以期阐明温度对蓝莓授粉的影响,明确蓝莓花粉活力和柱头可授性的最适温度,为蓝莓生产栽培花期管理,人工辅助授粉天气选择及温度抗性育种积累科学依据。结果表明:温度对"杰兔"的花粉活力和柱头可授性有显著影响,当温度显著降低或升高时花粉活力和柱头可授性均显著下降,当日均温为2.4℃时花粉活力仅为14.0%,同时柱头不具可授性,当最高温为32.3℃时花粉活力亦仅为41.0%,同时仅30.0%的柱头具强可授性。回归分析结果表明,"杰兔"花粉活力最高的适宜温度为21.5℃,柱头可授性最强的适宜温度为18.2℃。     

马铃薯高世代选系疮痂病抗性评价及SSR辅助筛选

利用国外种质资源创造的20 份高世代马铃薯无性系为试材,以尤金为感病对照,克新18 号为抗病对照,采用自然 病圃和人工接种的鉴定方式进行疮痂病抗性评价,利用SSR 分子标记分析试材之间的亲缘关系,并对比SSR 遗传相似性系 数聚类结果和试材抗病性分类结果,探究利用SSR 分子标记辅助筛选疮痂病抗病资源的可行性。从试验地土壤和感病块茎 共分离纯化具有链霉菌特征的菌株278 份,其中240 份来自于块茎,38 份来自于土壤。具有致病力的菌株127 株,经鉴定 全部属于Streptomyces scabies 菌种。试材间的抗病性存在明显差异,可分为高抗、中抗、中感和高感4 个类型。人工接种与 自然病圃抗性鉴定结果存在极显著相关（R²=0.946 7）。抗病类型与感病类型通过SSR 遗传相似性系数聚类大致可以区分。     

感应式高压静电喷头雾滴荷电效果影响因素分析

为研究如何在有限的充电电压下获得良好的雾滴荷电效果,首先建立了雾滴荷电过程的等效模型,对影响雾滴荷电效果的关键性参数进行理论推导;然后采取圆环形和仿形两种电极形式,取3个高压电极的关键性技术参数,设计4种不同的高压电极方案;最后配合2、2.5mm两种不同的绝缘层厚度,为雾锥角为80°的空心圆锥雾喷头TR 80-04设计了8种不同的高压静电罩,用网状目标法与法拉第筒法结合的荷质比测量系统对其荷电比进行测量,以荷质比评价其荷电效果的优劣。结果证明:理论分析与试验研究达到了良好的一致性,仿形电极的荷电效果明显优于圆环形电极,且电极宽度、电极中心到喷口的轴向距离与雾滴荷质比正相关,为高压静电罩的合理设计提供了可靠的理论和试验依据。