Effect of reducing dietary mineral content on growth performance, water intake, excreta dry matter content and blood parameters of broilers

1. The objective of this study was to investigate whether it is possible to reduce phosphorus (P) excretion by feeding a lower level of dietary P than that currently recommended, without compromising welfare, and whether this is sensitive to the level of dietary calcium (Ca). 2. A randomised complete block design was used with a total of 224 1-d-old male chicks of a commercial genotype in two batches. Chicks had a 10-d adaptation period. After this, they were moved to cages and allocated to one of 4 dietary treatments (4 and 3 birds per cage in batch 1 and 2, respectively). A standard level of Ca and P (8.3 and 6.6 g/kg, respectively) was compared with three lower levels of Ca (7.3, 6.3 and 5.3 g/kg) all at the same reduced level of P (5.5 g/kg). Records were made of live weight of birds on an individual basis and feed and water consumption on a cage basis. Every 7 d, the dry matter (DM) content of a sample of mixed excreta from each cage was measured. Birds were slaughtered and samples taken for analysis of plasma mineral content, retention of N, Ca and P and tibia bone strength. 3. The initial reduction in dietary mineral level did not adversely affect performance or bone strength. However, decreasing dietary Ca level below 7.3 g/kg, at constant P, led to reduced feed consumption and bone strength. Dietary treatment had no significant overall effect on water intake, water : feed ratio, excreta DM content, Ca and P retention or metabolisability of DM. There was no significant correlation between mean plasma Ca or P level and DM content of rectal digesta. 4. In conclusion, reducing dietary P from 6.6 to 5.5 g/kg to reduce potential environmental impact of broiler production had an adverse effect on bird welfare when the level of Ca was reduced below 7.3 g/kg, as a result of decreased feed intake in the early growth period and reduced skeletal strength.     

Comparison of larval thermal maxima between <Emphasis Type="Italic">Fundulus heteroclitus</Emphasis> and <Emphasis Type="Italic">F. grandis</Emphasis>

Fundulus heteroclitus and F. grandis are resident salt marsh fishes that overlap in distribution over a narrow range in northeastern Florida. The objective of the present study was to examine whether the limits of the species’ ranges could be explained by differences in thermal tolerance. Two populations of each species were collected and then spawned in the laboratory, and 9-day-old larvae were used for critical thermal maxima trials. Mean LOE temperatures of larvae ranged from 43.04 to 43.65°C and showed little difference between species. Therefore, differences in high temperatures experienced cannot account for the differences of the distributions of the two species. Condition-specific competition may play a greater role in determining the observed range of the two species.     

Estimation of the effect of lead and cadmium ions on fluctuating asymmetry in leaves of the common bean (Phaseolus vulgaris L.)

The effect of lead and cadmium ions on the fluctuating asymmetry of the side leaflets’ central veins of the common bean (Phaseolus vulgaris L.) was estimated. The impact of heavy metals on the parameter with the lead or cadmium content in the ground in the concentration of 650 mg/kg or 10 mg/kg respectively was not revealed.     

Effects of some nonionic polyoxyethylene surfactants on uptake of ethirimol and diclobutrazol from suspension formulations applied to wheat leaves

The influence of a number of commercial nonionic polyoxyethylene surfactants on the foliar penetration and movement of two systemic fungicides, ethirimol and diclobutrazol, was studied in outdoor-grown wheat plants at different growth stages and post-treatment temperatures in two consecutive growing seasons. Both fungicides were applied as ca 0·2 μl droplets of aqueous suspension formulations containing 0·5 g litre^?1 of ¹⁴C-labelled active ingredient; surfactants were added to these suspensions at concentrations ranging from 0·2-10 g litre^?1. To achieve optimum uptake of each fungicide the use of surfactants with different physicochemical properties was required. For diclobutrazol, a lipophilic compound, uptake of radiolabel was best with surfactants of low mean molar ethylene oxide (E) content (5-6) but it was necessary to use concentrations of ca 5 g litre^?1 to attain this. The surfactant threshold concentration for uptake enhancement of radiolabel from ethirimol formulations (< 2 g litre^?1) was much lower than that for diclobutrazol but surfactants with E contents > 10 induced the greatest amount of uptake. For both fungicides, surfactants with an aliphatic alcohol hydrophobe were generally more efficient in promoting their uptake than those with a nonylphenol moiety. The sorbitan-based surfactant ‘Tween 20’ proved to be an effective adjuvant only for the ethirimol formulation; the uptake enhancing properties of the block copolymer ‘Synperonic PE/F68’ were weak. Uptake performance could not be related to the spreading properties of the respective formulations on the wheat leaf surface or to differences in solubilisation of the two fungicides by the surfactants. Although surfactants could substantially increase the amount of acropetal transport of radiolabel from both fungicides, none of those tested specifically promoted it; a constant proportion of the radioactive dose absorbed by a treated leaf was usually exported away from the site of application. The results are discussed in the light of current theories about the mode of action of surfactants as spray adjuvants.     

Influence of variety on the within-plant distribution of cassava green spider mite (Acari: Tetranychidae), and leaf anatomical characteristics and chemical components in relation to varietal resistance

The within-plant distribution of the cassava green spider mite, Mononychellus tanajoa Bondar, and the anatomical characteristics and the chemical components relating to varietal resistance of cassava, were studied using 11 cassava genotypes with varying levels of resistance for two dry seasons and one wet season. The results show that M. tanajoa aggregates on the top leaves of cassava at low levels of resistance as compared with a more even within-plant distribution at higher levels of resistance. Thus, for accurate sampling of mite populations, it might be important to consider young and old leaves, not just the young leaves, in fields containing resistant and susceptible cassava genotypes. Correlations between the anatomical characteristics and mite population density and damage scores were not consistent across months, either within or over seasons. This suggests that leaf anatomical characteristics may not be important in the varietal resistance of cassava to M. tanajoa. During the dry season, mite population density was positively correlated with leaf nitrogen, potassium and phosphorus and negatively correlated with leaf calcium and fat. Only calcium was negatively associated with mite damage at the peak of the dry season (January 1993 and 1994). Breeding cassava genotypes with high levels of leaf calcium and fat, and low levels of leaf nitrogen, potassium and phosphorus, may improve the level of resistance to M. tanajoa.     

Genotyping Common Bean for the Potyvirus Resistance Alleles I and bc-1(2) with a Multiplex Real-Time Polymerase Chain Reaction Assay

ABSTRACT A multiplex real-time polymerase chain reaction (PCR) assay was developed to simultaneously genotype plants for the I and bc-1(2) alleles, which condition resistance in beans to Bean common mosaic virus and Bean common mosaic necrosis virus. A segregating F(2) population was derived from the cross between pinto bean breeding line P94207-189A (bc-1 bc-1 I I) and Olathe (bc-12 bc-1(2) i i). Real-time PCR assays were developed that were specific for each allele, and a multiplex PCR reaction could unambiguously assign F(2) plants to one of nine genotypes. Remnant F(1) plants were used as a comparative reference sample. PCR results among this sample fit a normal distribution for both real-time PCR assays, and 99% probability distributions were determined for heterozygotes. F(2) plants were genotyped based on results relative to the probability distributions for heterozygotes. F(2) plants also were genotyped for the I and bc-1(2) alleles by performing F(3) family progeny tests for virus resistance. Agreement between the two methods was 100% (198/198) for the bc-1(2) allele, and 92.4% (183/198) for the I allele. Erroneous genotyping was due to recombination between the amplicon and the I allele. Realtime PCR assays provide a robust method for genotyping seedlings and, in some cases, may eliminate the need for progeny testing.     

Pflanzenschutz und Schädlingsbekämpfung — Rechtsvorschriften

Ohne Zusammenfassung     

Response of Ugandan common bean varieties to Pseudocercospora griseola and Angular leaf spot disease development in varietal mixtures

Angular leaf spot (ALS) is one of the most economically important bean diseases in Africa. One promising control option for the disease is the use of mixtures of resistant and susceptible varieties. This research evaluated (1) the reaction of farmer preferred bean varieties to ALS in the screenhouse and on-station and (2) the effect of different spatial arrangements of resistant and susceptible bean varieties on ALS disease development. For the latter, five mixture combinations and two controls were laid out in a Randomized Complete Block Design having three replicates. Analysis of variance and least significant differences (LSDs) were used to compare disease levels in both studies above. Varietal screening showed significant differences in varietal reaction to ALS. Screenhouse disease scores ranged between 0 and 5, compared to 0.7–3.9 in the field. For the varietal mixture trial, the lowest disease levels and the highest mixture efficiencies were observed for the combination of equal proportions of the susceptible and resistant varieties randomly mixed (even mixture) prior to planting. We conclude that even mixtures reduce the amount of ALS disease that develops in the season.     

Using 3D animations to teach intracellular signal transduction mechanisms: taking the arrows out of cells

Traditional methods of teaching intracellular biological processes and pathways use figures or flowcharts with the names of molecules linked with arrows. Many veterinary students, presented with such material, simply memorize the names or chemical structures of the molecules and are then likely to forget the material once the examination is completed. To address this problem, the authors designed, created, and field-tested new teaching media that incorporate realistic three-dimensional (3D) animations depicting the dynamic changes that occur in intracellular molecules during cellular activation. Testing found that veterinary students taught using traditional teaching media (e.g., lectures, handouts, textbooks) are proficient in memorizing the names and order of intracellular molecules but unable to appreciate the interactions between these elements or their spatial relationships within cells. In contrast, more than 90% of veterinary students taught using 3D animations not only recall the facts about the intracellular elements but also develop accurate mental images of the interactions among these molecules and their spatial relationships. These findings strongly suggest that the comprehension of complex biological processes by veterinary students can be enhanced by the use of dynamic 3D depictions of these processes in the classroom.