Can bioplastic or woodchip groundcover replace herbicides or plastic mulching for valuable broadleaf plantations in Mediterranean areas?

Weed control is fundamental in plantations of valuable broadleaved species. The most common weeding techniques are repeatedly applied herbicides and removable plastic mulching, both raising environmental concerns. We studied the performance of these techniques on a hybrid walnut plantation, compared with three biodegradable mulch alternatives: a prototype bioplastic film, a layer of composted woodchips and a layer of ramial chips. The durability and effect of the treatments on tree performance (survival, growth, physiological traits) and soil features (moisture and temperature) were evaluated over 4 years. Herbicide yielded the best results, while all the mulching treatments provided better results than controls for nearly all the variables. The performance of plastic and bioplastic films was similar, suggesting that the latter could replace plastic mulching. The performance of the two chip mulches was similar and slightly below that of the films, probably because of the excessive thickness of the former (13–14 cm). In summary, biodegradable mulches showed high effectiveness in controlling weeds and so could offer an alternative to herbicide application and plastic mulching when these are contra-indicated technically (accessibility, repeatability), economically (labour cost), legally or environmentally.     

An assessment of potential of hybrid poplar for planting in the Virginia Piedmont

Poplar species grow well across the temperate zone, but hybrid varieties have not previously been evaluated for planting in the Virginia Piedmont region. The top 12 clones in height growth and rust resistance from a screening trial involving 98 hybrid poplar varieties of three taxa (Populus deltoides × P. maximowiczii, DxM; P. deltoides × P. nigra, DxN; P. deltoides × P. trichocarpa, DxT) were selected for planting in replicated yield trials at two locations in the Virginia Piedmont. Results through the first four growing seasons showed that the DxM taxon had the most rapid height development. It was, however, the taxon most affected by a late spring frost at the Appomattox-Buckingham State Forest site and by Septoria stem canker at the Reynolds Homestead site. Analysis of variance of clonal and location effects showed highly significant differences among replicates within location and among clones within taxon. Among seven clones within the DxM taxon, pairwise comparison tests of height growth identified two groups: a group of four better clones that were significantly different (p = 0.05) from a second group of three. These early results suggest that multi-selection criteria, including growth, disease and frost resistance, are important when developing hybrid poplar clones for planting in the Piedmont region.     

Resilience of European larch (<Emphasis Type="Italic">Larix decidua</Emphasis> Mill.) forests to wildfires in the western Alps

European larch is a dominant species in the subalpine belt of the western Alps. Despite recent increases in wildfire activity in this region, fire ecology of European larch is poorly understood compared to other larch species around the world. This study aims to assess whether European larch forests are resilient to fires, and to find out the factors that drive such resilience. We assessed the recovery of larch forests along a gradient of fire severity (low, moderate, high) based on the abundance and dominance of post-fire larch regeneration. We established 200 plots distributed among burned larch forests in nine wildfires that occurred between 1973 and 2007 in the western Alps. We included variables regarding topography, climate, fire severity, fire legacies, ground cover, grazing intensity, and time since fire. To evaluate potential drivers of larch recruitment, we applied generalized linear mixed models (GLMM) and random forests (RF). Larch regeneration was much more abundant and dominant in the moderate- and high-severity fire classes than in the low-severity class. More than half of the plots in the moderate- and high-severity classes were classified as resilient, i.e., post-fire larch regeneration was enough to recover a larch stand. GLMM and RF produced complementary results: fire severity and legacies, such as snags, canopy cover and distance to seed source, were crucial factors explaining post-fire larch recruitment. This study shows that fire has a positive effect on larch regeneration, and we conclude that European larch forests are highly resilient to mixed-severity fires in the western Alps.     

Effects of drought and rewatering on growth and transpiration in European beech seedlings late in the growing season

Drought stress is one of the most important environmental factors affecting plant growth and survival. To date, most studies aim at understanding of post-stress physiological and anatomical adaptation to drought stress; however only few studies focus on plant recovery. In the present study, transpiration, shoot water potential, and anatomical and morphological measurements were performed on 4-year-old European beech seedlings with fully developed leaves. The seedlings were exposed to three levels of soil water potential (well-watered, moderate drought stress and severe drought stress) and followed by rewatering under greenhouse conditions. Reduced transpiration rates were observed in the stressed seedlings as a response to drought stress, whereas anatomical and morphological variables remained unchanged. Three days after rewatering, transpiration rates in both moderately and severely stressed seedlings recovered to the levels of those of well-watered seedlings. Drought stress promoted leaf budding, resulting in higher shoot dry mass of stressed seedlings. Our findings indicate that anatomical and morphological adaptations of European beech seedlings to drought stress are visibly limited during late-season growth stages. These results will help us to further understand factors involved in drought adaptation potential of European beech seedlings faced with expected climate-related environmental changes. To complete our findings, further experiments on plant recovery from drought stress should be focused on different periods of growing season.     

Investigation of elastic constants and ultimate strengths of Korean pine from compression and tension tests

Korean pine (Pinus koraiensis) is a wood species recently adopted in China for the rehabilitation of traditional timber buildings. This paper investigates its mechanical properties with laboratory tests on typical specimens to obtain the moduli of elasticity, Poisson’s ratios, shear moduli, coefficients of mutual influence, crushing strengths and tension strengths in various directions. Highly different failure patterns of specimens in compression test were observed when loaded in different directions relative to the grain while only brittle failure mode was observed for tension specimens. The measured parameters of Korean pine were compared with those obtained from theory of orthotropic elasticity, the empirical formula and the Norris failure criterion, good agreements were reached for all examinations in general which indicate it is admissible to treat Korean pine as ideal orthotropic material.     

Relationship between <Superscript>137</Superscript>Cs concentration and potassium content in stem wood of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

To utilize forest resources in areas affected by fallout from the Fukushima Daiichi Nuclear Power Plant accident, it is important to understand the mechanisms of ¹³⁷Cs movement through the stem wood of contaminated trees. Understanding the mechanism of absorption and migration of ¹³⁷Cs to stem wood is necessary for clues to the future prediction of the transition of ¹³⁷Cs to xylem. In the present study, radial variations in ¹³⁷Cs concentration were investigated in Japanese cedar (Cryptomeria japonica D. Don) trees collected 1 year and 10 months after the accident. Additionally, the relationship between ¹³⁷Cs concentration and potassium (K) content was established. Trees with a higher moisture content and lower lightness value in heartwood tended to have a higher ¹³⁷Cs concentration in the heartwood. In these trees, ¹³⁷Cs concentration peaked at the heartwood–sapwood boundary and gradually decreased toward the pith. By contrast, K content within the heartwood remained nearly constant along the radial direction. The heartwood-to-sapwood ratio of ¹³⁷Cs concentration was significantly positively correlated with that of K content. Based on these results, we suggest that ¹³⁷Cs movement from sapwood to heartwood might be related to the K content ratio of heartwood and sapwood.     

Effects of tightening speed on torque coefficient in lag screw timber joints with steel side plates

To investigate the effects of tightening speed on the torque coefficient in lag screw timber joints with steel side plates, tightening tests were conducted on main timber members made from Cryptomeria japonica, Chamaecyparis obtusa and Pseudotsuga menziesii, under four tightening speed conditions (1, 4, 10, and 20 rpm). Major stick-slip behavior was observed in C. obtusa based on the relationship of tightening angle with clamp force, tightening torque, and thread torque at tightening speeds of 1 and 4 rpm. In addition, tightening speed’s effects on the torque coefficient (K) varied depending on the wood species of the main member. In P. menziesii, K was not affected by the tightening speed: the ratio of torque expended on tightening was 25% on average, and the ratio of torque expended on bearing surface friction was higher than the ratio of torque expended on thread friction.     

Temperature dependences of the dynamic viscoelastic properties of wood and acetylated wood swollen by water or organic liquids

In this study, to summarize the changes of thermal-softening behaviors of wood and acetylated wood due to differences in the kinds of swelling liquids, the following measurements were conducted. Untreated and acetylated wood samples were swollen by various liquids and the temperature dependences of the dynamic viscoelastic properties were measured after the heating and cooling histories were unified among the samples. The results obtained are as follows. Untreated samples swollen by high-polarity liquid had lower peak temperature of tanδ, however acetylated samples had higher peak temperature of tanδ than those of untreated wood. On the other hand, untreated wood samples swollen by low-polarity liquid had higher peak temperature of tanδ, however acetylated samples had lower peak temperature of tanδ than those of untreated wood. The amount of swelling is determined by interaction between wood and liquid due to proton-accepting power and molar volumes of liquid and so on, therefore the peak temperature of tanδ and degree of reduction in dynamic elastic modulus (E´) with increasing temperature were corresponded to the amount of swelling.     

Influence of pretreated wood dowel with CuCl<Subscript>2</Subscript> on temperature distribution of wood dowel rotation welding

This study examined the temperature distribution during rotation welding process using birch (Betula spp.) wood dowel and Chinese larch (Larix gmelinii) substrates. Wood dowels were divided into two categories including an untreated group and a group pretreated with cupric chloride. The mechanics test results indicated that the pullout resistance of the pretreated group with welded time 3 s showed the best performance. As a fitting analyses result, both the untreated group and pretreated group showed a significant nonlinear relationship among temperature, welded depth and welded time. In the untreated group case, a linear regression relationship was found between the highest temperature of the welding interface and the depth. However, two-stage fitting was used to fit the regression for the pretreated group. Compared with the untreated group, thermogravimetric (TG) analysis of the pretreated group welding interface presented two pyrolytic peaks, and it illustrated that the pretreatment promoted the depolymerization and pyrolysis of wood constituents.     

Experimental study on the fire performance of straight-line dovetail joints

To study the fire performance of the common dovetail joint in Chinese ancient architecture, we performed fire exposure and fire resistance tests of straight-line dovetail joints. The fire exposure test shows that the contact part of the dovetail joint was hardly charred because the gap between them is small. In the reference test, the displacement linearly varies with the load when the dovetail joint is fully pressed together. In the fire test, fire retardant coating can improve the fire resistance of the specimen, and its fire protection effect is remarkable. With the increase in load, the fire resistance of specimens obviously decreases. The effect of a tiny 2–4 mm gap between the tenon and the mortise on heat transfer is notably limited. The load level does not significantly affect the speed of temperature increase.