Long-term realised and projected growth impacts caused by autumn gum moth defoliation of 2-year-old Eucalyptus nitens plantation trees in Tasmania,Australia

Insect damage to production forests has the potential to reduce financial returns by retarding tree growth and causing mortality, however, long-term realised quantification of these losses is rare. In order to help elucidate economic damage thresholds for making spray decisions we capitalised on a natural outbreak of autumn gum moth, Mnesampela privata, in a 2-year-old Eucalyptus nitens plantation. Following the partial chemical control of this insect outbreak we measured the tree growth variables diameter at breast height over bark and height of five differing tree defoliation classes for 75 months following tree damage. At the end of this period a threshold model was fitted to describe the relationship between tree defoliation and realised tree wood volumes. The model revealed that realised stand wood volume was not significantly affected up until defoliation exceeded 60% and then declined sharply after this defoliation level was reached. Further support for this defoliation threshold was evident from multiple comparisons among defoliation classes that showed 50% defoliated trees did not have significantly different wood volume compared to more lightly defoliated trees, but did have significantly greater wood volume compared to trees that were 72% or more defoliated. To determine if the realised differences in wood volume resulted in differences in yield over a plantation rotation the E. nitens growth model NITGRO was used to on-grow trees to age 15 years for a ‘best case’ (type 1 growth response, constant growth rates from last inventory until harvest) and ‘worst case’ (type 2 growth response, divergent growth rates from last inventory until harvest) scenario. The threshold model was then fitted to the outcomes of both scenarios and the economic consequences of defoliation were clearly dependent on the growth function assumed.     

Interaction of root colonizing biocontrol agents demonstrates the antagonistic effect against <Emphasis Type="Italic">Fusarium oxysporum</Emphasis> f. sp. <Emphasis Type="Italic">lycopersici</Emphasis> on tomato

Plant growth promoting Bacillus subtilis MSS9 and Bacillus licheniformis MSS14 were isolated from the tomato rhizosphere. These isolates were capable of inhibiting the fungal pathogen, Fusarium oxysporum f. sp. lycopersici causing fusarium wilt in tomato, tested by dual culture method and by mycolytic enzyme production. The isolates have the capacity to form biofilm on the microtitre plate. Scanning electron microscopy revealed good colonization capacity of Bacillus licheniformis MSS14 on tomato plant root as compared to Bacillus subtilis MSS9, pot experiments were also analyzed to study the effects of both rhizobacterial cultures on pathogen development and plant growth. It was observed that MSS14 reduces the incidence of Fusarium oxysporum f. sp. lycopersici in tomato and there was significant increase in vegetative parameters like root length, shoot length, plant wet weight, dry weight and chlorophyll content after which indicates that the root colonization property of the culture MSS14 helps in enhancing the biocontrol capacity against pathogen than that of MSS9.     

Wireworm damage reduction in potatoes with an attract-and-kill strategy using <Emphasis Type="Italic">Metarhizium brunneum</Emphasis>

Innovative wireworm control strategies are required to implement integrated pest management on the basis of the (EC) No regulation 1107/2009 and Directive 2009/128/EC. Entomopathogenic fungi, such as Metarhizium brunneum (Metschnikoff) Sorokin, are potential biological control agents for wireworm control but do not achieve high control efficacies in the field when applied as a conidia suspension. In a 2-year study, wireworm control with a novel attract-and-kill strategy aimed at enhancing M. brunneum efficacies in organic potato production systems in Lower Saxony, Germany. The approach is based on the attraction of wireworms (Agriotes spp. Eschscholtz) towards an artificial carbon dioxide-emitting source, using baker’s yeast (Saccharomyces cerevisiae Meyen ex Hansen) in combination with M. brunneum conidia for wireworm infection. Both components were encapsulated in alginate as a carrier material and applied in a mixture with two types of beads (one for encapsulated yeast and one for M.brunneum conidia). An application of these beads within the potato rows during potato planting reduced wireworm tuber damage by 37–75% relative to the untreated control and was able to enhance the efficacy of M. brunneum by up to 35% through an attract-and-kill approach compared to beads without a carbon dioxide source only. This strategy offers a high potential to promote biological wireworm control as an alternative to insecticide use by potentially reducing the inoculum compared to an inundate M. brunneum conidia release strategy.     

Removal of As(III) from Aqueous Solution Using Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles: Process Modeling and Optimization Using Statistical Design

In this study, Extran (biodegradable surfactant) was used for the preparation of Fe₃O₄ nanoparticles by microemulsion process to improve removal efficiency of As(III) from aqueous solution. Fe₃O₄ nanoparticles were characterized by XRD, FTIR, FESEM, TEM, HRTEM, and VSM instrumental techniques. The effect of different parameters such as adsorbent dose, initial As(III) concentration, and solution pH were studied by response surface methodology (RSM) based on Box-Behnken design (BBD). The optimized condition for adsorption of As(III) from aqueous solution was obtained as adsorbent dose of 0.70 mg/g, solution pH of 7.7, and initial As(III) concentration of 33.32 mg/L. In this optimum condition, about 90.5% of As(III) was removed from the aqueous solution. Isotherm studies have been done at optimal condition, and it was observed that the Langmuir isotherm models were fitted well with experimental data having a high correlation coefficient of 0.993. From the Langmuir isotherm data, the maximum adsorption capacity of Fe₃O₄ nanoparticles was found to be 7.18 mg/g at pH 7.7 in room temperature. This study revealed that Fe₃O₄ nanoparticles can be used as an efficient, eco-friendly, and effective material for the adsorptive removal of As(III) from aqueous system.     

Synthesis, characterization and application of quinazolinone based reactive dyes for various fibers

Seven hot brand heterocyclic mono azo reactive dyes (7a–g) have been synthesized by coupling diazotized 2-phenyl-3{4′-[(4″-aminophenyl)sulphonyl]phenyl}-quinazoline-4(3H)-one-6-sulphonic acid (4) with various 2-chloro-4-nitro anilino cyanurated coupling components (6a–g) and their dyeing performance on silk, wool, and cotton has been assessed. The purity of dyes was checked by thin layer chromatography. These dyes were identified by recording IR and ¹H-NMR spectra. The λ _max, R _f value, %exhaustion, %fixation, light fastness, wash fastness, rubbing fastness, reflectance (%R) value, and K/S value have also been studied.     

印度西部5种热带干落叶林中凋落物中生物元素和返回到绿叶中的季节性变化(英文)

本文对印度西部5种热带干落叶林中凋落物里生物元素的季节性变化和它们返回到新鲜叶中季节性变化进行研究。对5个树种:阿拉伯金合欢(Acacia nilotica L.)、金合欢(Acacia leucophloea Roxb.)、柚木(Tectonagrandis L.f.)、绒毛野独活(Miliusa tomentosa Roxb.)和紫矿(Butea mono-sperma Lain.)中凋落物的成熟叶、枝和再生部分的N、P、Ca、Mg、K和Na的浓度,以及老叶和幼叶中浓度间的关系进行调查。对这些树种的总干物质进行记录,并分析它们所含的N、P、Ca、Mg、K和Na的含量。其中阿拉伯金合欢叶子中N的含量最高,而金合欢的叶子里Ca和Mg含量最高。叶中含P最多的是阿托伯金合欢、金合欢和紫矿,而含P最少的是柚木和绒毛野独活。K和Na含量在这些树种中没有明显的区别。观察发现,N、P和K的浓度随季节变化大,但Ca和Mg则不然。唯有钾在所有树种中都是最稳定的,吸收N和P可以用于来年新叶的生长。从老叶和凋落物中吸收的营养会支持新叶的生长,并增加土壤的肥力。图1表4参30。     

Modelling regional level spatial distribution of aphid (Lipaphis erysimi) growth in Indian mustard using satellite-based remote sensing data

Abstract

We developed a procedure for preparing a model for mapping spatially distributed zones of aphid pest (Lipaphis erysimi) outbreaks at a regional level. This study employed near-surface meteorological parameters derived from National Oceanic and Atmospheric Administration (NOAA) Television and Infra-Red Operational Satellites (TIROS) Operational Vertical Sounder (TOVS) data and field observations of disease infestation. The study area comprised three sites representing semi-arid and sub-humid regions of dominant Indian mustard (Brassica juncea L.)-growing regions of India. A model based on TOVS-derived cumulative surface air temperature and minimum specific humidity (SpH) was developed to estimate the date of ‘aphid onset’ (first appearance), date of peak infestation and location of severity with respect to aphid population density. Aphid population growth rate during the linear growth phase between aphid onset to peak was computed using SpH-weighted temperature and dates of sowing of the crop (crop age). Sowing dates of mustard crop, of northwest India, were obtained from spectral growth profiles derived from time series remote sensing (RS) products of the SPOT-4 VEGETATION sensor. Estimated dates of peak aphid infestation and peak population showed a strong match with the observed data. The location of peak aphid population density was depicted in each spatial grid of 25×25 km² for parts of northwest India. The simulated aphid population build-up and date of peak population density was validated with observed data for an unknown site in the Sriganganager district, Rajasthan state, India. Comparison of predicted dates of attaining peak aphid population with observations showed a deviation of ±7 days. After validation, the regional level model was applied over a large area of a mustard-growing region for varying dates of sowing, surface air temperature and specific humidity, to show the spatial distribution of aphid growing severity zones (population density) and to predict dates of severe aphid infestation (peak population) at each grid level in the region.