Preparation and characterization of electroless nickel-coated cellulose fibres

The aim of this project was to fabricate electroless nickel-coated cellulose fibres. Ultimately, these nickel-coated cellulose fibres will be used to develop a cost-effective polymer composite for electromagnetic interference (EMI) shielding and/or electrostatic discharge (ESD) applications. An attempt has been made to impart electrical conductivity onto cellulose fibres via an electroless nickel plating process. The aim was to achieve a homogeneous, continuous layer of Ni on the cellulose fibres, and the plating conditions were optimized to achieve this. The relationship between the coating morphology and the performance of the coated fibre was also of interest. Testing was carried out using cellulose filter paper and then loose cellulose fibres. Scanning electron microscopic (SEM) images of nickel-coated filter paper showed that nickel particles are bonded to the cellulose fibres. The coating appeared more compacted and continuous as plating time increased, corresponding to lower surface resistivity. This observation suggested a correlation between morphology and electrical conductivity of the coating. For nickel-coated cellulose fibres, after optimization of plating conditions, a uniform deposition of nickel particles around the cellulose surfaces was confirmed by SEM images. EDS and XRD results confirmed similar coating could be produced on filter paper and cellulose fibres. SEM images of cross-sectioned nickel-coated cellulose fibres illustrated nickel particles had penetrated into the inner walls of the cellulose fibres. This impregnation of the fibres should act to increase the bonding between nickel coating and cellulose fibres. These nickel-impregnated cellulose fibres could now be incorporated into a polymer matrix to create an electrically conducting composite with the right processing parameters.     

越南安息香的低温半致死温度与抗寒适应性

以越南河内(Hanoi)、江西吉水(Jishui)、湖南资兴(Zixing)3个产地1年生越南安息香幼苗为试材,采用人工模拟低温处理技术进行低温处理,测定电解质外渗率,并配合Logistic方程对不同产地枝条的半致死温度(LT50)进行了拟合;测定低温处理下各产地越南安息香的MDA含量、根系活力,并观察不同产地越南安息香1年生幼苗的恢复情况.结果表明,3个产地越南安息香耐低温能力差异显著,半致死温度值LT50在-14.93～-9.48℃之间,抗寒性强弱排序依次为:Zixing＞ Jishui＞ Hanoi;幼苗叶片MDA含量、根系活力及抽条指数均反映出产地抗寒性强弱与半致死温度基本一致.     

Tilapia Lake Virus was not detected in non-tilapine species within tilapia polyculture systems of Bangladesh

Sixteen countries, including Bangladesh, have reported the presence of tilapia lake virus (TiLV), an emerging tilapia pathogen. Fish polyculture is a common farming practice in Bangladesh. Some unusual mortalities reported in species co-cultivated with TiLV-infected tilapia led us to investigate whether any of the co-cultivated species would also test positive for TiLV and whether they were susceptible to TiLV infection under controlled laboratory experiments. Using 183 samples obtained from 15 farms in six districts across Bangladesh, we determined that 20% of the farms tested positive for TiLV in tilapia, while 15 co-cultivated fish species and seven other invertebrates (e.g. insects and crustaceans) considered potential carriers all tested negative. Of the six representative fish species experimentally infected with TiLV, only Nile tilapia showed the typical clinical signs of the disease, with 70% mortality within 12 days. By contrast, four carp species and one catfish species challenged with TiLV showed no signs of TiLV infection. Challenged tilapia were confirmed as TiLV-positive by RT-qPCR, while challenged carp and walking catfish all tested negative. Overall, our field and laboratory findings indicate that species used in polycultures are not susceptible to TiLV. Although current evidence suggests that TiLV is likely host-specific to tilapia, targeted surveillance for TiLV in other fish species in polyculture systems should continue, in order to prepare for a possible future scenario where TiLV mutates and/or adapts to new host(s).     

CD34 protein is expressed in murine,canine, and porcine lungs

The cell surface protein CD34 is expressed in various human tissues and cells, including hematopoietic stem cells, vascular endothelial cells, mucosal dendritic cells, mast cells, eosinophils, microglia, fibrocytes, muscle satellite cells, and platelets. There is a lack of data on the expression of CD34 in canine and porcine tissues. Therefore, we designed a series of immunoblotting, immunohistochemistry, and immunofluorescence experiments to observe CD34 expression in murine, canine, and porcine lungs. We used a rabbit antibody (clone EP373Y) to target the conserved human CD34 C-terminal region and validated its immunoreactivity against mouse lung homogenates. The data showed diffuse bronchiolar and alveolar epithelial localization of CD34 protein in normal murine, canine, and porcine lungs. At 9 or 24 h after bacterial endotoxin exposure, murine CD34 protein shifted to specific bronchoalveolar cells with a punctate pattern, as quantified by CD34 fluorescence. Specific porcine bronchoalveolar cells and leukocytes had significant CD34-positive immunostaining after H3N1 influenza infection. Thus, our study provides fundamental data on the expression of CD34 in lungs and validates an antibody for use in further experiments in these animal species.     

Application of the Cropping System Model (CSM)‐CROPGRO‐Soybean for Determining Optimum Management Strategies for Soybean in Tropical Environments

The determination of optimum crop management practices for increasing soybean production can provide valuable information for strategic planning in the tropics. However, this process is time consuming and expensive. The use of a dynamic crop simulation model can be an alternative option to help estimate yield levels under various growing conditions. The objectives of this study were to evaluate the performance of the Cropping System Model (CSM)‐CROPGRO‐Soybean and to determine optimum management practices for soybean for growing conditions in the Phu Pha Man district, Thailand. Data from two soybean experiments that were conducted in 1991 at Chiang Mai University and in 2003 at Khon Kaen University were used to determine the cultivar coefficients for the cultivars CM 60 and SJ 5. The CSM‐CROPGRO‐Soybean model was evaluated with data from two experiments that were conducted at Chiang Mai University. The observed data sets from farmers’ fields located in the Phu Pha Man district were also used for model evaluation. Simulations for different management scenarios were conducted with soil property information for seven different soil series and historical weather data for the period 1972–2003 to predict the optimum crop management practices for soybean production in the Phu Pha Man district. The results of this study indicated that the cultivar coefficients of the two soybean cultivars resulted in simulated growth and development parameters that were in good agreement with almost all observed parameters. Model evaluation showed a good agreement between simulated and observed data for phenology and growth of soybean, and demonstrated the potential of the CSM‐CROPGRO‐Soybean model to simulate growth and yield for local environments, including farmers’ fields, in Thailand. The CSM‐CROPGRO‐Soybean simulations indicated that the optimum planting dates from June 15 to July 15 produced maximum soybean yield in a rainfed environment. However, the planting date December 15 produced the highest yield under quality irrigation. Soybean yield was slightly improved by applying nitrogen at a rate of 30 kg N ha^?1 at planting. Soybean yield also improved when the plant density was increased from 20 to 40 plants m^?2. The results from this study suggest that the CSM‐CROPGRO‐Soybean model can be a valuable tool in assisting with determining optimum management practices for soybean cropping systems in the Phu Pha Man district and might be applicable to other agricultural production areas in Thailand and southeast Asia.     

Genetic control of acquired high temperature tolerance in winter wheat

Summary The development of high temperature-tolerant wheat (Triticum aestivum L.) germplasm is necessary to improve plant productivity under high-temperature stress environments. The quantification of high temperature tolerance and the characterization of its genetic control are necessary for germplasm enhancement efforts. This study was conducted to determine the genetic control of acquired high temperature tolerance in common bread wheat cultivars. Reduction of 2,3,5-triphenyltetrazolium chloride (TTC) by heat-stressed seedling leaves was used as a quantitative measure to characterize acquired high temperature tolerance. Eleven-day-old seedlings of 20 F₁ progeny produced through a complete 5×5 (Payne, Siouxland, Sturdy, TAM W-101, and TAM 108) diallel mating design were acclimated at 37° C for 24 hours, followed by a 2-hour incubation at 50° C. Under these test conditions, acquired high temperature tolerance ranged from a high of 75.7% for the genotype TAM W-101 × TAM 108, to a low of 37.3% for the genotype Payne × Siouxland. Partitioning of genotypic variance revealed that only the general combining ability component effect was statistically highly significant, accounting for 67% of the total genotypic variation. These results suggest that enhancing the level of high temperature tolerance in wheat germplasm is feasible utilizing existing levels of genetic variability and exploiting additive genetic effects associated with high temperature tolerance.Contribution of the Texas Tech College of Agric. Sci. Journal no T-4-386. This work was supported by USDA specific agreement No. 58-7MNI-6-114 from the Plant Stress and Water Conservation Laboratory, USDA-ARS, Lubbock, Texas, USA     

Conservation costs: Nature‐based tourism as development at Cuc Phuong National Park,Vietnam

Abstract: Local communities are frequently displaced from areas selected for environmental protection. Development of nature‐based tourism, believed to be more environmentally benign than traditional agricultural systems, has been encouraged by governments and national park managers in the hope of providing alternative livelihoods for local people. This paper examines the extent to which indigenous peoples resettled from within one Vietnamese national park have engaged with the nascent tourism industry, thereby providing a perspective on the success of their resettlement, through the eyes of those communities affected. The perspectives of resettled peoples are contrasted with those of villagers who have continued to reside within the national park, using traditional means of survival, along with new initiatives designed to supplement their livelihoods and to reduce their dependence on national park resources for survival. Resettled villagers are unable to survive on agricultural activity alone, tourism has done little to provide an alternate livelihood and the park environment is still threatened by the use of park resources by resettled communities in their struggle to survive.