Effect of Water Quality Parameters on the Migration of Vinyl Chloride Monomer from Unplasticized PVC Pipes

The migration of vinyl chloride monomer (VCM) from unplasticizedpolyvinyl chloride (uPVC) pipes was investigated using locallymanufactured pipes. Specimens of 33 cm long were used throughoutthe research. The investigation was carried out under differentconditions of water temperature, pH and total dissolved solidsconcentration and at different durations of exposure. The VCMconcentration in the water was evaluated using the gaschromotography (GC)/head-space technique. A VCM concentration ofmore than 2.5 ppb was detected after 30 days of exposure at45 °C. The initial VCM concentration in the uPVC pipewas predicted using equations derived from Fick's first law ofdiffusion. Water tenperature did not affect the migration ofVCM, unless it was raised to high values (i.e. 45 °C).Total dissolved solids (TDS) and pH of water were found toaffect the release of VCM from uPVC pipes. Diffusion rate of VCMwas predicted as a function of pH or TDS values.     

Management practices to control premature senescence in Bt cotton

Commercial cultivation of Bt cotton produced higher boll load which led to stiff inter-original competition for photosynthates, resulting in early cessation of growth (premature senescence) due to more availability of sink and less sources. To overcome this problem, field experiment was conducted during 2011 and 2012 using five treatments of plant growth manipulation viz. no fruiting branch removal (F₁), removal of first fruiting branch (F₂), removal of first and second fruiting branch (F₃), removal of all squares from first fruiting branch (F₄), removal of all squares from first and second fruiting branches (F₅), and three potassium (K) application rates viz. 50 kg ha^?1 (K₁), 100 kg ha^?1 (K₂), and 150 kg ha^?1 (K₃). More nodes above white flower were recorded in F₅, followed by F₃, while minimum were recorded in F₁. Among potassium levels, maximum nodes above white flower were recorded in K₃ followed by K₂ and K₁ during both years of study. Plant height recorded at physiological cutout stage or at maturity stage showed that plants gained more height with removal of all squares from first tosecond fruiting branches with higher potassium dose. Leaf K increased with increasing applied potassium and also with square/branch removal. So early removal of squares/fruiting branches along with higher potassium dose helped in delaying canopy senescence in Bt cotton.     

Evaluation of sunflower (Helianthus annuus L.) single cross hybrids under heat stress condition

Sunflower is an important oilseed crop, which shows susceptibility to heat stress. In this study, 63 single cross hybrids were evaluated under heat stress condition for 2 years and compared with the two commercial hybrids. Genotype and genotype × environment (GGE) was used to differentiate single cross hybrids on the basis of multiple traits. GGE biplot showed that several single cross hybrids had higher seed yield potential than standard check. Moreover, seed yield per plant (SYP) was related to pollen viability percentage, showing that achene yield was the product of high gametophytic fertility under heat stress. Hybrids having high seed yield potential under heat stress had lower cell membrane injury. GGE biplot for SYP and its components showed that single cross hybrids were characterized into two major groups. Group I was further characterized into two sub group. Group Ia included hybrids with high 100-SW, while group Ib had the hybrids with high number of seeds per head and head diameter. Group II had the hybrids with high kernel weight and kernel to seed ratio. The hybrids could be recommended according to their potential utilization in the seed industry.     

Lead Toxicity in Cereals and Its Management Strategies: a Critical Review

Cereal grains such as wheat, rice, and maize are widely consumed as a staple food worldwide. Lead (Pb) is one of the non-essential trace elements and its toxicity in crops especially cereals is a widespread problem. The present review highlighted Pb toxicity in cereal and management strategies to reduce its uptake in plants. Lead toxicity reduced the cereal growth, photosynthesis, nutritional value, yield, and grain quality. The response of cereals to excess varies with plant species, levels of Pb in soil, and growth conditions. Reducing Pb bioavailability in the soil is a viable approach due to its non-degradability either by microbes, chemicals, or other means. Cultivation of low Pb-accumulating cultivars may reduce the risk of Pb toxicity in plants and humans via the food chain. Use of plant growth regulators, microbes, organic, and inorganic amendments might be promising techniques for further decreasing Pb contents in shoot and grains. Soil amendments along with selecting low Pb-accumulating cultivars might be a feasible approach to get cereal grains with low Pb concentrations. Furthermore, most of the studies have been conducted under controlled conditions either in hydroponic or pots and less is known about the effects of Pb management approaches under ambient field conditions.     

Accumulation and distribution of Zn and Mn in soybean seeds after nutrient seed priming and its contribution to plant growth under Zn- and Mn-deficient conditions

Nutrient seed priming is a strategy to increase the seed reserves of mineral nutrients as primary source for mineral nutrition during seedling development and early growth. The present study investigates the effects of zinc (Zn) and manganese (Mn) seed priming on growth and nutritional status of soybean under conditions of Zn and Mn limitation. Nutrient seed priming increased the natural seed reserves for Zn by, approximately, sixfold and by fivefold for Mn; however, 40–60% of the primed nutrients were adsorbed to the seed coat. Zinc seed priming was able to maintain plant growth for 5 weeks in the same way as Zn supply via the nutrient solution. It is concluded that nutrient seed priming offers perspectives to improve seed quality of soybean for early seedling development under limited nutrient supply or availability and needs further investigation on performance under various stress conditions.     

Zinc fertilization of lentil for grain yield and grain zinc concentration in ten Saskatchewan soils

Fertilization of grain legumes with zinc (Zn) can affect both marketable yield and Zn content of the grain, which is important in addressing human nutritional deficiencies in certain regions of the world. A pot experiment was conducted to determine the response of three different market classes of lentil to Zn fertilization using ten surface soils from Saskatchewan (Canada). The distribution of Zn among labile and stable fractions chemically separated from the soil was also determined in the ten prairie soils and related to the lentil responses observed. The three market classes of lentils (large and small green, small red) were grown without Zn (control), and with 2.5 and 5 kg Zn ha^?1 added as zinc sulfate to each soil prior to planting. Zinc fertilizer application significantly influenced grain yield and was soil dependent. A significant increase in grain yield over the control was observed from application of Zn on some low organic matter, high pH Brown Chernozem soils whereas a decrease in grain yield over control was observed in other soils such as a Black Chernozem of high organic matter content and low (<7) pH. Lack of positive yield response to addition of Zn were related to measured high diethylene triamine pentaacetic acid (DTPA) extractable and plant root simulator (PRS) resin membrane probe Zn, and large amounts of native Zn in exchangeable and iron/manganese (Fe/Mn) oxide bound fractions. Application of Zn fertilizer generally increased the grain concentration of Zn. For example, an increase of ～20% in Zn concentration over control was observed when 5 kg Zn ha^?1 was added to a loamy textured low organic matter Brown Chernozem soil. Overall, small green lentil was more consistent in producing a positive response to Zn fertilizer application on soils with low plant available Zn compared to large green lentil and small red lentil.     

Effectiveness of potassium in mitigating the salt-induced oxidative stress in contrasting tomato genotypes

To check the efficacy of potassium in alleviating oxidative stress under salt stress, salt-tolerant (Indent-1) and salt-sensitive (Red Ball) tomato (Lycopersicon esculentum Mill.) genotypes were exposed to three levels of sodium chloride (NaCl) (0, 75, 150 mM) and two levels of potassium (4.5 and 9 mM) in solution and foliar form. Thirty days of treatments revealed that increasing NaCl stress increased lipid peroxidation (malondialdehyde, MDA) and correspondingly the activity of antioxidant enzymes (superoxide dismutase, SOD; catalase, CAT; and glutathione reductase GR) in both genotypes. However, higher potassium (K) level in solution or foliar spray during the salt-induced stress decreased MDA and antioxidant activity and increased the growth in salt-tolerant genotype than in the salt-sensitive genotype. Decrease in MDA concentration, activity of antioxidant enzymes, and increase in the growth of tomato plants by the application of potassium under salt stress suggest that potassium is an effective ameliorating agent against salt-induced oxidative damage.     

Management of human health risk in the context of kitchen gardens polluted by lead and cadmium near a lead recycling company

Purpose

At the global scale, gardening activities are often performed in urban areas with a historical background of pollution. In this study, a participatory program was developed with citizens concerned by gardening activities near a 50-year-old regulated lead recycling company, with the aim of co-constructing the tools for the assessment and management of potential sanitary risks induced by historic pollution with persistent (eco) toxic metals: lead and cadmium.

Materials and methods

Soils and vegetables (lettuce, leek, celery, carrot, chard, pumpkin, and celeriac) samples were collected from four kitchen gardens neighboring a 50-year-old secondary lead smelter. Both total and in vitro human bioaccessible metal concentrations in the cultivated plants were measured in relation to soil characteristics.

Results and discussion

The results showed that the soils of these gardens were slightly contaminated by metals (Pb, 77 to 236 mg kg^?1; and Cd, 0.5 to 1 mg kg^?1) in comparison with the natural geologic background. However, significant pollution of vegetables can occur especially with lead (Pb up to 9.8 mg kg^?1 in lettuce) and certainly as a result of direct foliar transfer. The washing of plants before consumption is therefore recommended in the context of atmospheric fallout of ultrafine particles enriched with metals.

Conclusions

Metal bioaccessibility measure integrates the influence of metal type, plant type, and soil physico-chemical properties. Based on the results, it is proposed that human bioaccessible fraction of metals may also be currently taken into account as well as total metal quantities and bioaccumulation factors in risk assessment studies performed in gardens. Overall, this study has led to reflections and functional recommendations aimed at reducing human exposure and to finally developing sustainable gardening practices.

     

New alkamides from maca (Lepidium meyenii)

Maca (Lepidium meyenii) has been used as a food in Peru for thousands of years. More recently a wide array of commercial maca products have gained popularity as dietary supplements, with claims of anabolic and aphrodisiac effects, although the biologically active principles are not fully known. In an earlier chemical investigation, two new alkamides and a novel fatty acid, as well as the N-hydroxypyridine derivative, macaridine, were isolated from L. meyenii. Further examination has led to the isolation of five additional new alkamides, namely, N-benzyl-9-oxo-12Z-octadecenamide (1), N-benzyl-9-oxo-12Z,15Z-octadecadienamide (2), N-benzyl-13-oxo-9E,11E-octadecadienamide (3), N-benzyl-15Z-tetracosenamide (4), and N-(m-methoxybenzyl)hexadecanamide (5). Their structures were established by spectrometric and spectroscopic methods including ESI-HRMS, EI-MS, (1)H, (13)C, and 2D NMR, as well as (1)H-(15)N 2D HMBC experiments. In addition, the identity of N-benzyl-15Z-tetracosenamide (4) was confirmed by synthesis. These compounds have been found from only L. meyenii and could be used as markers for authentication and standardization.     

Comparative Effects of Organic and Inorganic Fertilizers on Soil Organic Carbon and Wheat Productivity under Arid Region

ABSTRACT

Organic amendments in the soil perform better than synthetic fertilizers in regards to soil fertility and sustainable crop productivity. Experiments were conducted to compare the effects of organic and synthetic fertilizers on soil fertility and wheat (Triticum aestivum L.) productivity. Soil fertility and protein contents of wheat grains (13.2% and 13.3% during 2005–06 and 2006–07, respectively) were improved by organic amendments. However, synthetic fertilizer (at the rate of 150, 100, and 60 kg ha^?1 N, P₂O₅, and K₂O, respectively) applications resulted in the maximum grain yield (4.05 and 4.46 t ha^?1 during 2005–06 and 2006–07, respectively). The observed and simulated soil organic carbon (SOC) reasonably agreed during RothC model validation (R ² = 0.99). Economic analysis showed the maximum net profit and relative increase in income ($729 US ha^?1 and 309%, respectively) from inorganic treatment. Application of synthetic fertilizers increased grain yield and farm profit while organic manure enhanced grain quality. The RothC model had potential for determining the SOC in organic farming under arid environment.