Yield potential and salt tolerance of quinoa on salt‐degraded soils of Pakistan

Quinoa is recently introduced to Pakistan as a salt‐tolerant crop of high nutritional value. Open field trials were conducted to evaluate its performance on normal and salinity/sodicity‐degraded lands at two locations of different salinity/sodicity levels, S₁ (UAF Farm, Normal Soil), S₂ (Paroka Farm UAF, saline sodic), S₃ (SSRI Farm, normal) and S₄ (SSRI Farm, saline sodic) during 2013–2014. Two genotypes (Q‐2 and Q‐7) were grown in lines and were allowed to grow till maturity under RCBD split‐plot arrangement. Maximum seed yield (3,062 kg/ha) was achieved by Q‐7 at normal field (S₁) soil which was statistically similar with yield of same genotype obtained from salt‐affected field S₂ (2,870 kg/ha). Furthermore, low yield was seen from both genotypes from both S₃ and S₄ as compared to S₁ and S₂. Q‐7 was best under all four conditions. Minimum yield was recorded from Q‐2 (1,587 kg/ha) at S₄. Q‐7 had higher SOD, proline, phenolic and K⁺ contents, and lower Na⁺ content in leaves as compared to Q‐2. High levels of antioxidants and K⁺/Na⁺ of Q‐7 helped to withstand salt stress and might be the cause of higher yields under both normal and salt‐affected soils. Seed quality (mineral and protein) did not decrease considerably under salt‐affected soils even improved seed K⁺, Mg²⁺ and Mn²⁺.     

Structured analysis of seepage losses in irrigation supply channels for cost-effective investments: case studies from the southern Murray-Darling Basin of Australia

Much of inland Australia has been in perpetual drought since 1997 except during 2010 when above average rainfall occurred. It has been the worst drought since 1788 when European settlement began. Water scarcity poses a serious threat to the sustainability of the irrigated agriculture in major irrigation systems across the Murray-Darling Basin (MDB). There is a need for water-saving measures and a structured approach to assess water loss in earthen supply channels. This paper presents such an approach to assess and reduce seepage losses for improving irrigation efficiencies. Main elements of this approach are the following: field measurements, hydrologic modelling, potential options for seepage reduction, economic analysis and financing water-saving investments. Using data from two irrigation systems in the southern MDB, a case is made for reducing seepage water losses in irrigation supply channels in a cost-effective manner using low-cost technologies. Increasing the level of security for investments in water-saving programs provides incentives to key stakeholders to achieve water-saving targets. Considering the value of water recovered from reducing seepage loss at irrigation system level, this study demonstrates how reducing just one component (seepage) from the total water losses in irrigation systems can help improve water supplies as well as the environmental flows. Potential options for financing infrastructure improvement for saving irrigation water are proposed and discussed.     

Biochar Mitigates Salinity Stress in Potato

A pot experiment was conducted in a climate‐controlled greenhouse to investigate the growth, physiology and yield of potato in response to salinity stress under biochar amendment. It was hypothesized that addition of biochar may improve plant growth and yield by mitigating the negative effect of salinity through its high sorption ability. From tuber bulking to harvesting, the plants were exposed to three saline irrigations, that is 0, 25 and 50 mm NaCl solutions, respectively, and two levels of biochar (0 % and 5 % W/W) treatments. An adsorption study was also conducted to study the Na⁺ adsorption capability of biochar. Results indicated that biochar was capable to ameliorate salinity stress by adsorbing Na⁺. Increasing salinity level resulted in significant reductions of shoot biomass, root length and volume, tuber yield, photosynthetic rate (A_n), stomatal conductance (g_s), midday leaf water potential, but increased abscisic acid (ABA) concentration in both leaf and xylem sap. At each salinity level, incorporation of biochar increased shoot biomass, root length and volume, tuber yield, A_n, g_s, midday leaf water potential, and decreased ABA concentration in the leaf and xylem sap as compared with the respective non‐biochar control. Decreased Na⁺, Na⁺/K⁺ ratio and increased K⁺ content in xylem with biochar amendment also indicated its ameliorative effects on potato plants in response to salinity stress. The results suggested that incorporation of biochar might be a promising approach for enhancing crop productivity in salt‐affected soils.     

Growth and physiology of basmati rice under conventional and water-saving production systems

Conventionally flooded rice (CFR) requires enormous water and labor inputs. Water scarcity aspires for cultivation of water-saving rice. Growth response and physiology of basmati rice genotypes under the water-saving production systems has not been reported yet. Studies were conducted for 2 years to compare the growth and physiology of three rice cultivars (Super Basmati, Basmati-2000 and Shaheen Basmati), under high (CFR), medium (alternate wetting and drying [AWD]) and low water input (aerobic rice [AR]) systems. Leaf area index, crop growth rate, leaf area duration and dry matter accumulation were higher for AR followed by AWD and CFR, respectively. Shaheen Basmati had a lower growth and relative water contents than Super Basmati and Basmati-2000, probably due to its shorter stature and shorter life cycle. Photosynthetic rate and stomatal conductance of rice cultivars in the different production were affected only at reproductive stage. Basmati-2000 grown as AR had the highest photosynthetic rate followed by the same cultivar under AWD. The results of this study provide us an idea that basmati cultivars can attain a high growth and development with low water input. This would be helpful to grow rice successfully under water-short rice-growing environments.     

Effects of silvopastoral areas on milk production at dual-purpose cattle farms at the semi-humid old agricultural frontier in central Nicaragua

In extensive cattle production systems, the composition of grazing areas may significantly influence productivity. In dual-purpose cattle production systems in the lowland tropics, pasture lands with trees, so-called silvopastoral areas, are considered as being important, particularly to facilitate the management of crossbred European native cattle. The aim of the study was to quantify the effects of silvopastoral areas on production at dual-purpose cattle farms in the semi-humid lowlands of central Nicaragua. The relationships between seasonal milk production and herd data, and the proportions of land use types were examined for 74 farms by stepwise regression analysis.     

Demand-driven breeding of food legumes for plant-nutrient relations in the tropics and the sub-tropics: serving the farmers; not the crops!

A number of improved cultivars of food legume crops have been developed and released in the tropics and the sub-tropics. Most of these cultivars have been developed through conventional breeding approaches based on the development of crop varieties under optimum soil fertility levels. Nevertheless, it is hardly possible to say that the varietal provisions made by the past approach have been readily accepted, and properly utilized to boost productivity of food legumes grown by resource-poor farmers. The approach itself did not fully appreciate the actual circumstances of the resource-poor farmers where marginal production systems prevail and the poorest farmers could not afford to use cultivars developed under optimum soil fertility level. Therefore, the limitations and strategic implications of past experiences made to develop crop cultivars need to be analyzed in order to formulate better strategies and approaches in the future. The main purpose of this article is to review the efforts made, the technical difficulties associated with the genetic improvement in food legumes as related to plant-nutrient relations, causes of limited breeding success and thereby draw lessons useful to designing future breeding strategies. The scope of nutrient deficiency stress and the approaches to breeding for plant-nutrient relations are discussed and the need for refining the approach and better targeting of the breeding methodologies suggested.     

Genetic variability of heat tolerance, and its effect on yield and fibre quality traits in upland cotton (Gossypium hirsutum L.)

Global temperature is rising because of increasing concentrations of CO₂ and other greenhouse gases (e.g. methane, nitrous oxide, etc.) in the atmosphere because of the excessive use of fossil fuels. High temperature causes heat stress which reduces crop productivity. The development of heat-tolerant varieties is feasible and will help mitigate the effects of climate change. Fifty-one cotton accessions were screened in heat-stressed and non-stressed conditions in the glasshouse and field. Relative cell injury percentage (RCI %), a measure of cell membrane thermostability (CMT), was used to assess heat tolerance. Heat-tolerant accessions had more stable yield and yielded more seed cotton with better quality fibre than the heat-intolerant accessions across four environments. The responses of the 51 accessions to all four environments for the measured traits were strongly associated. RCI % of the accessions and hybrids was strongly and negatively associated with yield and fibre traits. CMT was concluded to be a useful technique for identification of heat-tolerant cotton.     

Zinc biofortification of maize (Zea mays L.): Status and challenges

Zn deficiency is one of the leading health problems in children and women of developing countries. Different interventions could be used to overcome malnutrition, but biofortification is most impactful, convenient, sustainable and acceptable intervention. Maize is one of the major crops grown and consumed in the regions with prevalent Zn malnutrition; therefore, this is suitable target for Zn biofortification. Zn biofortification of maize could be achieved through agronomic and genetic approaches. Discussion of agronomic approaches with genetic approaches is prerequisite because soils in developing countries are deficit of Zn and availability of Zn in soils is mandatory for estimating the genetic responses of maize genotypes through genetic approaches. Seed priming, foliar and soil applications are agronomic tools for biofortification, but solo and combined applications of these treatments have different effects on Zn enrichment. Genetic approaches include the increase of Zn bioavailability or increase of kernel Zn concentration. Zn bioavailability could be increased by reducing the anti‐nutritional factors or by increasing the bioavailability enhancers. Kernel Zn concentration could be improved through hybridization and selections, whereas genetically engineered attempts for improving Zn uptake from soil, loading in xylem, remobilization in grains and sequestration in endosperm can further improve the kernel Zn concentration. Key challenges associated with dissemination of Zn biofortified maize are also under discussion in this draft. Current review emphasized all of above‐mentioned contents to provide roadmap for the development of Zn biofortified maize genotypes to curb the global Zn malnutrition.