Potato evapotranspiration and yield under different drip irrigation regimes

A field experiment comparing different irrigation frequencies and soil matric potential thresholds on potato evapotranspiration (ET), yield (Y) and water-use efficiency (WUE) was carried out in a loam soil. The experiment included five treatments for soil matric potential: F1 (-15 kPa), F2 (-25 kPa), F3 (-35 kPa), F4 (-45 kPa) and F5 (-55 kPa) and six treatments for irrigation frequency: N1 (once every day), N2 (once every 2 days), N3 (once every 3 days), N4 (once every 4 days), N6 (once every 6 days) and N8 (once every 8 days). Results indicate that both soil matric potential and drip irrigation frequency influenced potato ET, Y and WUE. Potato ET increased as irrigation frequency and soil matric potential increased. Comparing soil water potential, the highest ET was 63.4 mm (32.1%) more than the lowest value. Based on irrigation frequency treatments, the highest ET was 36.7 mm (19.2%) more than the lowest value. Potato Y and WUE were also found to increase as irrigation frequency increased. Potato Y increased with an increase in soil water potential then started to decrease. The highest Y and WUE values were achieved with a soil matric potential threshold of -25 kPa and an irrigation frequency of once a day.Communicated by J. Ayars     

Simulation of drainage water quality with DRAINMOD

The design and management of drainage systems should consider impacts on drainage water quality and receiving streams, as well as on agricultural productivity. Two simulation models that are being developed to predict these impacts are briefly described. DRAINMOD-N uses hydrologic predictions by DRAINMOD, including daily soil water fluxes, in numerical solutions to the advective-dispersive-reactive (ADR) equation to describe movement and fate of NO₃-N in shallow water table soils. DRAINMOD- CREAMS links DRAINMOD hydrology with submodels in CREAMS to predict effects of drainage treatment and controlled drainage losses of sediment and agricultural chemicals via surface runoff. The models were applied to analyze effects of drainage intensity on a Portsmouth sandy loam in eastern North Carolina. Depending on surface depressional storage, agricultural production objectives could be satisfied with drain spacings of 40 m or less. Predicted effects of drainage design and management on NO₃-N losses were substantial. Increasing drain spacing from 20 m to 40 m reduced predicted NO₃-N losses by over 45% for both good and poor surface drainage. Controlled drainage further decreases NO₃-N losses. For example, predicted average annual NO₃-N losses for a 30 m spacing were reduced 50% by controlled drainage. Splitting the application of nitrogen fertilizer, so that 100 kg/ha is applied at planting and 50 kg/ha is applied 37 days later, reduced average predicted NO₃-N losses but by only 5 to 6%. This practice was more effective in years when heavy rainfall occurred directly after planting. In contrast to effects on NO₃-N losses, reducing drainage intensity by increasing drain spacing or use of controlled drainage increased predicted losses of sediment and phosphorus (P). These losses were small for relatively flat conditions (0.2% slope), but may be large for even moderate slopes. For example, predicted sediment losses for a 2% slope exceeded 8000 kg/ha for a poorly drained condition (drain spacing of 100 m), but were reduced to 2100 kg/ha for a 20 m spacing. Agricultural production and water quality goals are sometimes in conflict. Our results indicate that simulation modeling can be used to examine the benefits of alternative designs and management strategies, from both production and environmental points-of-view. The utility of this methodology places additional emphasis on the need for field experiments to test the validity of the models over a range of soil, site and climatological conditions.     

The Exploitation of Nematode-Responsive Plant Genes in Novel Nematode Control Methods

The molecular interactions between plants and sedentary nematodes are undergoing intense study, not only for reasons of fundamental research but also for the potential benefits to agriculture. The present technology allows the transformation of an increasing number of crop plants, providing new ways to introduce resistance against plant-parasitic nematodes. The ability of sedentary nematodes to induce specialized feeding sites in plant roots is one of the most fascinating aspects of this host–parasite interaction. Molecular approaches have been initiated to identify and characterize plant genes altered in expression after infection by sedentary nematodes. The results obtained indicate that many genes indeed become up-regulated upon nematode infection. Surprisingly, several so-called constitutive promoters that are normally used to achieve high expression in plant cells are completely ‘silenced’ in the feeding sites within days after nematode infection. Generally, there are two options available for the genetic engineering of nematode resistance: the synthesis of anti-nematode proteins or the localized production of a cytotoxic protein that interferes with the development of feeding cells. Nematode-induced promoters are very useful for the production by plants of sufficiently high levels of anti-nematode proteins at feeding sites. Alternatively, interfering with feeding-cell development is somewhat similar to the hypersensitive response evoked by nematodes in a naturally resistant plant. Here, destruction of specific plant cells can be achieved by the localized expression of a cytotoxin such as barnase, a potent ribonuclease. This approach, however, calls for a highly specific ‘non-leaky’ promoter, which is active only in the feeding cells. Another possibility is to use a two-component system, where the leakiness of the promoter in other tissues is counterbalanced by the constitutive expression of a neutralizing gene.     

Development and testing of a surface roughness measurement device based on aerial ultrasonic reflections

Paddy and Water Environment - Repairs of concrete irrigation channels in Japan are guided to a large extent by the degree to which their walls have degraded over decades of use. Current methods of...     

SnToxA,SnTox1, and SnTox3 originated in Parastagonospora nodorum in the Fertile Crescent

The centre of origin of the globally distributed wheat pathogen Parastagonospora nodorum has remained uncertain because only a small number of isolates from the Fertile Crescent were included in earlier population genetic and phylogeographic studies. We isolated and genetically analysed 193 P. nodorum strains from three naturally infected wheat fields distributed across Iran using 11 neutral microsatellite loci. Compared to previous studies that included populations from North America, Europe, Africa, Australia, and China, the populations from Iran had the highest genetic diversity globally and also exhibited greater population structure over smaller spatial scales, patterns typically associated with the centre of origin of a species. Genes encoding the necrotrophic effectors SnToxA, SnTox1, and SnTox3 were found at a high frequency in the Iranian population. By sequencing 96 randomly chosen Iranian strains, we detected new alleles for all three effector genes. Analysis of allele diversity showed that all three effector genes had higher diversity in Iran than in any population included in previous studies, with Iran acting as a hub for the effector diversity that was found in other global populations. Taken together, these findings support the hypothesis that P. nodorum originated either within or nearby the Fertile Crescent with a genome that already encoded all three necrotrophic effectors during its emergence as a pathogen on wheat. Our findings also suggest that P. nodorum was the original source of the ToxA genes discovered in the wheat pathogens Phaeosphaeria avenaria f. sp. tritici 1, Pyrenophora tritici-repentis, and Bipolaris sorokiniana.     

Response of industrial hemp to Salsola kali subsp. tragus densities under organic and conventional fertilisation

A 2-year field study was conducted to determine the effects of different nutrition systems and Salsola kali subsp. tragus densities on industrial hemp yield and its components. Experiments were conducted as a split plot in a randomised complete block design with three replicates. Factors were fertilisation (poultry manure, vermicompost and nitrogen fertiliser) as the main plot and weed density (0, 5, 10, 15 and 20 plants/m²) as the subplot. Results indicated that the maximum number of racemes per plant, seeds per raceme, 1000-seed weight, biomass, grain yield and harvest index (HI) of industrial hemp were obtained using vermicompost and were reduced with nitrogen fertiliser application. All measured properties in hemp plants decreased due to increasing S. kali subsp. tragus density, especially at 15 and 20 plants/m². The most significant reduction in hemp grain yield and its components was observed by increasing weed density with the application of nitrogen fertiliser. The application of vermicompost at high weed densities resulted in greater hemp grain yield and its components compared with nitrogen fertiliser. It is recommended to apply organic fertilisers, especially vermicompost at high S. kali subsp. tragus densities.     

大豆抗菌核病的全基因组关联研究

找到大豆与抗菌核病强关联的候选位点或候选基因,为抗病基因克隆和抗病分子标记开发提供借鉴,服务大豆抗菌核病育种。对126个加拿大大豆品种的基因组DNA用ApekⅠ酶消化后Illumina Hiseq2000平台测序进行基因分型,供试的126个材料用棉垫接种核盘菌菌丝体进行表型鉴定。采用Structure 2.3.4、SPSS 20.0、TASSEL 5.0和PLINKv 1.07软件分别模拟群体遗传结构、二元主成分分析、邻接法聚类,进行SNP-phenotype和Haplotype-phenotype的关联分析(只考虑加性效应)。最小等位基因频率0.01过滤,得到30 125个SNPs。主成分及群体结构聚类结果中度一致,将126个供试材料划分为2个组群,Kappa聚类一致度检验K=0.44。邻接法(The neighbor-joining algorithm,NJ)聚为3个组群。α≤0.05时,在单个SNP-phenotype的关联研究中,最强关联在3号染色体物理位置34387780、34387823和34387841处(P值都为8.669E-7),可分别解释表型变异的17.80%,其次在20,1,4,17号染色体上。Haplotype-phenotype的关联分析中,最强关联在17号染色体物理位置5575883/5647814/5648648/5734897处(P值为1.038E-6),可解释表型变异的17.56%。200 kb范围内,3号染色体上的候选基因有Glma.03g129100、Glma.03g129200、Glma.03g129300、Glma.03g129500、Glma.03g129800、Glma.03g129900。17号染色体上为Glma.17g071300、Glma.17g072200、Glma.17g073300。     

Quality aspect of fish sauce prepared from underutilized fatty Japanese anchovy and rabbit fish

ABSTRACT:   To explore the potential utility of underutilized fish in the fish sauce industry, fish sauces were prepared from both raw and heat-induced meat of Japanese anchovy Engraulis japonica and rabbit fish Siganus fuscescens using wheat malt, and their quality aspects and sensory properties were assessed. Proximate composition of the fish meat represents protein as the major component (16.0–17.8%), other than moisture. Analyses of free amino acids, peptides including oligopeptides, and organic acids contents in fish sauces revealed suitability of both raw and heat-induced meat of the selected species in commercial fish sauce production. The variations in taste of raw meat fish sauces were species-specific, but the taste of fish sauces from heat-induced meat were similar.     

Retracted: Study of testis histology and sperm morphology in the Bunnei,Barbus sharpeyi (Gunther, 1874) induced by luteinizing hormone‐releasing hormone analogue and carp pituitary extract

This study was conducted to determine the effects of hormone treatment on testis structure in Barbus sharpeyi, as well as the morphology of sperm examined by scanning electronic microscopy (SEM). Male B. sharpeyi were divided into three groups (three fish per group) and injected with luteinizing hormone – releasing hormone analogue (LHRH–A₂) or carp pituitary extract (CPE). The first and second groups were treated with 10 μg kg^?1 LHRH–A₂ and metoclopramide (MET), and their testis were sampled pre‐ and Poststripping respectively. The third group received 2 mg kg^?1 CPE and were killed pre‐stripping. Based on the histological results obtained, the testicular connective tissue of the lumen was thicker, and seminal vesicles were of a lower volume, in fish injected with CPE in comparison to the other groups. After treatment with LHRH–A₂ and MET, not all spermatozoa within the testis were ejaculated, and only a small amount of sperm was obtained by abdominal stripping. The highest and lowest diameters of connective tissue within lobules were observed in fish receiving CPE and LHRH–A₂ treatments respectively. There was a significant difference (P < 0.05) in lobule space between the fish injected with the CPE and the fish injected with the LHRH–A₂ and MET. The SEM results revealed that the spermatozoa of B. sharpeyi were composed of a spherical to elliptical head, a cylindrical midpiece, and a lengthy flagellum. In conclusion, it was found that injection with LHRH–A₂ and MET improved the spermatogenic process in comparison to injection with CPE.