Factorial analysis on forest canopy density restoration in the burned area of northern Great Xing＇an Mountains, China

The restoration of forest landscape has drawn much attention since the catastrophic fire took place on the northern slope of Great Xing‘an Mountains in 1987. Forest canopy density, which has close relation to forest productivity, was selected as a key factor to find how much the forest quality was changed 13 years after fire, and how fire severity, regeneration way and terrain factors influenced the restoration of forest canopy density, based on forest inventory data in China, and using Kendall Bivariate Correlation Analysis, and Distances Correlation Analysis. The results showed that fire severity which was inversely correlated with forest canopy density grade was an initial factor among all that selected. Regeneration way which did not remarkably affect forest canopy density restoration in short period, may shorten the cycle of forest succession and promote the forest productivity of conophorium in the future, Among the three terrain factors, the effect of slope was the strongest, the position on slope was the second and the aspect was the last.     

水分胁迫对栓皮栎幼苗生理特性及生长的影响

通过盆栽实验，研究了在不同的水分条件下栓皮栎幼苗生理特性的变化和苗木生长量的变化。研究表明，在水分胁迫初期，随土壤含水量的降低，栓皮栎叶片的净光合速率、蒸腾速率下降，而水分利用效率提高。在水分胁迫末期，由于长期的干旱胁迫，水分条件最差的一组苗木已干枯死亡，土壤含水量从38．123％下降到20．323％时，净光合速率和蒸腾速率均下降，水分利用效率也下降。随着土壤含水量的降低，苗高、地径和生物量均有下降的趋势，其中生物量下降的幅度最大。     

<Emphasis Type="Italic">Pinus halepensis</Emphasis> somatic embryogenesis is affected by the physical and chemical conditions at the initial stages of the process

Pinus halepensis has been described as a drought-tolerant species with high plasticity to growth in different environments. Its eco-physiological characteristics could facilitate the use of this species in large afforestations in the future scenery of climate change. Somatic embryogenesis is a biotechnological tool with potential for large-scale clonal propagation. In order to establish an improved regeneration protocol for Pinus halepensis, the effects of different temperatures (18, 23, and 28 °C) and water availability conditions (2, 3, and 4 g L^?1 Gelrite^®), during initiation of embryonal masses on the rate of initiation, proliferation, maturation, and the number of embryos developed, were evaluated. It was found that environmental conditions during the initiation stage of Pinus halepensis somatic embryogenesis influence the success of initiation and proliferation. In contrast, there was no effect of these conditions on the maturation rates and the number of somatic embryos. Somatic embryos were obtained in all treatments tested, indicating that plants can be produced from extreme conditions of induction, such as high temperatures (28 °C) and low water availability conditions (4 g L^?1).     

Establishment of a high-frequency regeneration system in <Emphasis Type="Italic">Cerasus humilis</Emphasis>, an important economic shrub

Cerasus humilis is a species of small, perennial, drought-resistant and multipurpose deciduous shrub grown in arid and semi-arid conditions in northern China. In this study, an efficient protocol for the rapid micropropagation of C. humilis has been standardized using stem and/or leaf explants. Direct multiple shoot induction was observed when the stem explants were cultured on Murashige and Skoog (MS) medium supplemented with different plant growth regulators. The highest shoot induction was obtained when stem explants from adult trees were cultured on MS medium supplemented with 2.0 mg L^?1 6-benzyladenine (6-BA) and 0.9 mg L^?1 α-naphthaleneacetic acid (NAA). The leaf and stem explants cultured on MS medium with 1.0 mg L^?1 6-BA and 0.6 mg L^?1 NAA, and 0.5 mg L^?1 6-BA and 0.8 mg L^?1 NAA, respectively, produced the highest induction frequency of callus. Maximum proliferation of callus was observed on MS medium containing a combination of 0.5 mg L^?1 6-BA with 0.6 mg L^?1 2,4-dichlorophenoxyacetic acid (2,4-d). Optimal shoots differentiated from callus were obtained on MS medium supplemented with 5.0mg L^?1 6-BA and 0.9 mg L^?1 NAA. In vitro rooting was achieved on half-strength (1/2) MS medium containing 0.5 mg L^?1 NAA. Rooted plantlets were hardened under control conditions and successfully acclimatized under field conditions.     

Chemical composition,antioxidant and antibacterial activities of extracts from <Emphasis Type="Italic">Schinus molle</Emphasis> wood branch growing in Egypt

In the present work, for the first time, the chemical components of essential oils (EOs) and extracts from wood branch (WB) resulted from the tree pruning wastes of Schinus molle L. grown in Egypt were evaluated for their antioxidant and antibacterial activities. EOs, methanol (ME), dichloromethane (DCME) and water (WE) extracts as antioxidant and antibacterial activities were measured. Total phenolic and flavonoid contents as well as analysis of extracts by gas chromatography–mass spectrometry (GC–MS) were reported. The major components in EOs were α-elemol, β-pinene, and α-phellandrene, in ME were 6-(4-chlorophenyl)-3-cyano-4-(N-benzylpiperazino)-2H-pyran-2-one, and 2-naphthalene methanol, decahydro-α,α,4a-trimethyl-8-methylene, in DCME were 12-methyl-E,E-3,13-octadecadien-1-ol, and 1,2-benzenedicarboxylic acid, dioctyl ester, and in WE were β-eudesmol, and (Z,Z,Z)-9,12,15-octadecatrienoic acid, 2,3-dihydroxypropyl ester. The highest total antioxidant activity was found with EOs (90 ± 1.23 %) and WE (86.30 ± 1.40 %). The lowest IC₅₀ values of 13.11 ± 3.00, and 12.66 ± 2.15 μg/mL were found with WE and EOs, respectively. EOs and WE were observed to have good antibacterial activity against Bacillus subtilis, Bacillus cereus, Staphylococcus aureus, Escherichia coli, Sarcina lutea, Pseudomonas aeruginosa, and Micrococcus luteus. In conclusion, the Schinus molle L. WB EOs and extracts might, indeed, be used as a potential source for pharmaceutical or food industries.     

The Level II aggregated forest soil condition database links soil physicochemical and hydraulic properties with long-term observations of forest condition in Europe

Key message

Aggregated, consolidated, and derived soil physicochemical data of 286 ICP Forests Level II plots were completed with soil hydraulic properties for integrated use with forest monitoring data. Database access should be requested at http://icp-forests.net . Metadata associated available at https://metadata-afs.nancy.inra.fr/geonetwork/apps/georchestra/?uuid=153e599e-6624-4e2b-b862-8124386ea9cd&hl=eng

Context

The ICP Forests database is one of the most comprehensive forest ecosystem datasets in Europe and contains the accumulated results of more than two decades of harmonised forest monitoring all over Europe.

Aims

The aim of this paper is to share knowledge on the ICP Forests Level II soil data for broader use among forest scientists.

Methods

After standard analysis, quality checks, aggregation, and calculation of derived variables (e.g. nutrient stocks, base saturation, C:N ratio, and water retention parameters), data have been gathered into a static database (AFSCDB.LII.2.2), which will be updated to new versions as soon as new measurements become available.

Results

The database provides a basis for the combined evaluation of up to 130 unique soil variables of 286 plots with dynamic data on tree growth, ground vegetation, foliar chemistry, crown condition, tree phenology, leaf area index, ozone injury, litterfall, soil solution chemistry, deposition, ambient air quality, and meteorological data assessed on the same plots.

Conclusion

The unprecedented comprehensiveness and level of detail in this newly aggregated database may overcome existing restrictions so far impeding the realisation of large-scale forest ecosystem studies in Europe.

     

Analysis of sawn lumber production from logging residues of branchwood of <Emphasis Type="Italic">Aningeria robusta</Emphasis> and <Emphasis Type="Italic">Terminalia ivorensis</Emphasis>

One way of meeting the supply demands of the wood industry is through the reduction of waste in timber processing. It has been estimated in Ghana that for every tree felled, nearly 50% of the tree volume is left in the forest in the form of branches, crownwood, and stumps. In this study, the potential of utilizing branchwood as raw material from logging residues to help meet the timber demands of the downstream processing sector was analyzed experimentally. The sawing characteristics of the branchwood of Aningeria robusta and Terminalia ivorensis with diameters in the range 10–25 cm using live sawing and cant sawing methods were determined using a randomized complete block design, 2 × 4 factorial with three replications. Experimental results indicate that, the relative lumber value yields for first and second grade boards of A. robusta and T. ivorensis branches were 25 and 20%, respectively, while the green lumber volume yields were 40 and 32%, respectively. A high proportion of sapwood and the occurrence of washboarding in T. ivorensis contributed to that species’ relatively low lumber value and volume yield. The experimental results further indicate that the sawing technique used had no significant influence on lumber yields. However, at 5% level of significance, significant differences in lumber yield existed between some of the diameter classes.     

Influence of Ammoniacal Copper Quaternary treatments on mechanical properties of blue-stained Lodgepole Pine wood

Three concentrations （2.8%, 2.0%, 1.2%） of Ammoniacal Copper Quaternary （ACQ） was selected to treat Lodgepole pine wood for evaluating ACQ treatment on mechanical properties of blue-stained wood. The bending modules of elasticity （MOE）, modules of rupture （MOR）, toughness and shearing strength parallel to grain on tangential surface, are tested according to the criteria GB1927-1943-91. Non-treated sample were also tested according to the same procedure. The results showed that the three groups specimen impregnated by different concentrations of ACQ solution met the AWPA standard 2003 of America （UC4A 6.4g/cm^3）. There were significant difference of toughness between treated wood and non-treated wood （p=0.01）, but there were no statistically significant differences among three concentrations in terms of toughness, and toughness of treated wood was approximately 20% lower than non-treated. MOR, MOE as well as sheafing strength parallel to grain were found to be not significantly different between treated wood and non-treated one, and there were no statistically significant difference among three concentrations of ACQ too. Toughness, MOR, MOE and sheafing strength parallel to grain increased with decrease of concentration of ACQ, but they were hardly affected by ACQ preservatives.     

Spectrophotometrical characteristics in the near infrared region in beech (<Emphasis Type="Italic">Fagus crenata</Emphasis>) and pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) litters at the various decomposing stages

We examined the relationships between the absorptional characteristics in the near infrared region and the chemical changes of decomposing beech (Fagus crenata) and pine (Pinus densiflora) litters. Spectra as well as the concentrations of chemical substances approached each other and converged with decomposition, although both initial characteristics differed markedly between beech and pine. This indicated that the fundamental chemical structures were almost the same, although their organochemical composition differed. Specific absorption bands for lignin, polysaccharide, and protein were identified at 2,140 and 1,670 nm, 2,270, 1,720, 1,590, and 1,216 nm, and 2,350 nm, respectively. Absorbance at 1,670 nm, peculiar band of aromatics, showed a positive correlation with lignin concentration, which suggested the relative increment of aromatics due to condensed lignin in decomposing litters. Absorbance at 2,140 nm, characterized as the C–H bond in HRC = CHR, showed a negative correlation with lignin concentration, which suggested the decrements of some structures such as side-chains in lignin polymers unrelated to aromatics. Absorbance at 2,270, 1,720, and 1,216 nm, specified to O–H/C–O/C–H bonds in saccharide, might reflect the change of polysaccharide during decomposition because they showed a positive correlation to polysaccharide concentration. In the same way, absorbance at 2,350 nm, identified to the C–H/CH₂ bonds in protein, showed a negative correlation to nitrogen concentration in decomposing litters, which might indicate that the C–H/CH₂ bonds in protein decreased with decomposition due to microbial consumption of carbon in protein. Our findings suggested the possibility that the spectral changes indicate the litter digestibility during decomposition and that also explain the compositional change in decomposing litters.