Do pine plantations provide mycorrhizal inocula for seedlings establishment in grasslands from Patagonia,Argentina?

We investigated if Pinus ponderosa plantations in Patagonia are able to produce viable mycorrhizal inocula towards adjacent grasslands, which only harbor endomycorrhizal vegetation. We hypothesized that these inocula have the potential to contribute to the establishment of naturally disseminated seedlings. Also, we determined the main fungal taxa involved in this process. Seven plantations in the onset of their reproductive phase and located in the Patagonian native forest/steppe ecotone (Argentina) were selected. Soil samplings were obtained at nine points along a 450 m long, W-E transect established in each plantation. Soil bioassays were performed in a greenhouse, with P. ponderosa seedlings acting as hosts for mycorrhizal inocula present in soil samples, during 12 months. Mycorrhization percentage, morphotype richness and morphotype composition was determined through morphological evaluation. Viable ecto- and ectendomycorrhizal inocula were found disseminated outside plantations. The amount of mycorrhizal inoculum followed a decreasing function with distance to plantation edges. Mycorrhizal fungal genus Rhizopogon and “E-strain” mycorrhizal types appeared as pioneering taxa regarding seedlings colonization, being the most persistent and frequent symbionts found. Plantations, thus, facilitate the surrounding terrain for newcoming seedlings through the dispersion of mycorrhizal fungal inocula.     

Grouping of <Emphasis Type="Italic">Tectona grandis</Emphasis> (L.f.) clones using wood color and stiffness

Commercial Tectona grandis plantations using clones have attracted considerable interest for lumber production in tropical regions where small areas are frequent. However, studies on wood properties are limited. Therefore, the purpose of this study is to group clones with similar wood color characteristics using the CIELab system, and mechanical resistance by dynamic stiffness (Ed) in order to obtain different types of clones for different climate and edaphic conditions. It was found that lightness (L*), yellowness (b*), redness (a*), and Ed are similar to those found for other plantation trees. These wood characteristics are significantly influenced by clone and site. Variance due to clone and site went from 31 to 53% and from 2.95 to 24.22%, respectively. Another source of variance was distance from pith, with the exception of parameter b*, which was not affected. Finally, clones were grouped (using multivariate analysis) according to color and mechanical resistance. This analysis established 4 groups by color and 5 groups by Ed. Clone clustering will allow us to choose or use clones with similar wood properties according to site and environmental conditions increasing area production and wood quality uniformity.     

Exotic tree species displace indigenous ones on farms at intermediate altitudes around Mount Kenya

Agroforestry systems are potentially suitable for conservation of tree genetic resources. Farmers around Mt. Kenya usually integrate trees into their farm. Large parts of these trees seem to be of exotic origin, whereas indigenous species have priority for conservation. This study aimed at determining on-farm richness, composition and frequency of indigenous and exotic woody species around Mount Kenya to assess the suitability of farms for the conservation of indigenous tree species. 265 on-farm plots of 0.5 ha size each were selected in 18 different agro-ecological zones by using a stratified sampling scheme. All woody species within the plot were recorded with their local and scientific names. Total species richness was 424 (including 306 indigenous ones), mean richness per plot 16.5 species (including 8.8 indigenous ones). Eight out of the 10 most frequent species were exotic ones with Grevillea robusta from Australia ranking first (found on almost 76% of the surveyed farms). The proportion of indigenous species increased with increasing aridity and temperature. Dominance of exotic species was found at farms of humid mid- and highlands. Ordination analysis revealed that mostly exotic species contributed to separation of farms in the highlands and upper midlands, whereas indigenous species in the lower midlands and lowlands. As the frequencies of most indigenous trees were low, only parts of the surveyed farms can contribute to conservation of tree genetic resources, particularly the less intensively managed farms of the more arid lands. Farmers’ access to knowledge on valuable indigenous tree species and to quality seedlings of these trees need to be improved to increase indigenous species’ frequencies on farms and possibly to replace some of the exotic species in the future.     

Effects of gibberellin A<Subscript>4/7</Subscript>, 6-benzylaminopurine and chlormequat chloride on the number of male and female strobili and immature cones in Chinese pine (<Emphasis Type="Italic">Pinus tabuliformis</Emphasis>) with foliar sprays

Three kinds of plant growth regulators, gibberellinA 4/7 (GA 4/7 ), 6-benzylaminopurine (BA), and chlormequat chloride (CCC), were evaluated for their ability to promote strobilus and cone production in a Chinese pine (Pinus tabuliformis Carr.) clonal seed orchard. Treatments (0, 250, 500, or 1000 mg L -1 ) were applied during three periods (June- July, July-August and August-September) in 2005. Of the three plant growth regulators, GA 4/7 was the best for promoting flower and cone production. Trees sprayed...     

Cloning of vacuolar H<Superscript>+</Superscript>-ATPase subunit c genes from Japanese iris,and functional characterization in yeast

Five different isoforms (IrlVHA-c1-c5) of V-ATPase subunit c (VHA-c) were cloned from a Japanese iris (Iris lactea Pall. var. chinensis Fisch. Koidz) cDNA library using degenerate primers PCR and the 5'-RACE technique. The sequence analysis showed the open reading frame (ORF) of the IrlVHA-c1 c5 to be 495 bp, corresponding to a protein of 164 amino acids. Among the five isoforms, IrlVHA-c1 and IrlVHA-c2 are completely homologous. The IrlVHA-c protein is localized at the vacuolar membrane as indicated by a g...     

Effects of silviculture treatments in a hurricane-damaged forest on carbon storage and emissions in central Hokkaido,Japan

Hurricanes cause abrupt carbon reduction in forests, but silviculture treatment can be an effective means of quickly regenerating and restoring hurricane-damaged sites. This study assessed how silviculture treatments affect carbon balance after hurricane damage in central Hokkaido, Japan. We examined carbon storage in trees and underground vegetation as well as carbon emissions from silviculture operations in 25-year-old stands, where scarification and plantation occurred just after hurricane damage. The amount of carbon stored varied according to silviculture treatment. Among three scarification treatments, a scarified depth of 0 cm (understory vegetation removal) led to the largest amount of carbon stored (64.7 t·ha-1 C). Among four plantation treatments, the largest amount of carbon was stored in a Larix hybrid (L. gmelinii var. japonica × L. kaempferi) plantation (80.3 t·ha-1 C). The plantation of Abies sachalinensis was not successful at accumulating carbon (40.5·ha-1 C). The amount of carbon emitted from silviculture operations was 0.05-0.14 t·ha-1 C, and it marginally affected the net carbon balance of the silviculture project. Results indicate that silviculture treatments should beperformed in an appropriate way to effectively recover the ability of carbon sequestration in hurricane-damaged forests.     

Durability characteristics of cement-bonded particleboards manufactured from maize stalk residue

Cement-bonded particleboards of 6 mm in thickness were manufactured using maize stalk (Zea mays) particles of uniform sizes at three levels of board density and additive concentrations respectively. The bending strength and dimensional properties were assessed. Increase in board density and additive concentration caused increase in Modulus of rupture (MOR), Modulus of elasticity (MOE), and decrease in Thickness swelling (TS) and Water absorption (WA). The MOR, MOE and TS of the boards were significantly affected by board density except for WA, but additive concentration affected all the boards’ properties examined at p ≥ 0.05. Strong and dimensional stable cement-bonded boards could be manufactured from maize stalk particles with Portland cement as the binder after hot water treatment. Although the dimensional stability and mechanical strength properties of the boards were affected by the board density and additive concentration, the study revealed that cement-bonded particleboards could be manufactured from maize stalk (Zea mays) particles. However, the increase in board density and additive concentration could cause the increase in MOR and MOE, and cause the decrease in TS and WA of boards.     

Culling phenotypically inferior trees in seed production area enhances seed and seedling quality of <Emphasis Type="Italic">Acacia auriculiformis</Emphasis>

Improvement in seed and seedling quality of Acacia auriculiformis after culling phenotypically inferior trees was studied in a 6-year old seed production area (SPA). A 5-ha plantation was identified, of which 2.3 ha was converted into SPA. The initial stocking, 1 612 trees·ha⁻¹, was thinned down to 982 trees·ha⁻¹ based on growth characteristics. The following fruiting season, seeds were collected from 10 randomly selected trees in culled and non-culled stands, and seed physical characters, germination and seedling traits were assessed. Seed weight, seed thickness and percentage germination increased by 32.1%, 4.43% and 22.37%, respectively in the culled stand compared to the non-culled stand. Culling also increased the speed of germination, seedling dry weight and seedling vigor index. Heritability values were high for seed weight (0.974) and seed thickness (0.948) while medium values were observed for percentage germination (0.577) and total dry weight (0.534). Predicted genetic gain was 11.13% and 11.22% for seed weight and percentage germination, respectively. The actual gain was 32.1, 51.9 and 22.9% for seed weight, percentage germination and total dry matter, respectively. In conclusion, SPAs established by culling inferior trees could serve as sources of good quality seeds for reforestation programs until genetically improved seeds are made available.     

Variability and divergence in <Emphasis Type="Italic">Pongamia pinnata</Emphasis> for further use in tree improvement

A total of 24 candidate plus trees (CPTs) of Pongamia pinnata (L.) Pierre. were selected to elucidate their variation and diversity based on thirteen quantitative traits (4 pod traits, 6 seed traits of parent trees and 3 progeny traits) at Forest Research Centre, Institute of Forest Productivity — Mandar, Ranchi district during 2005–2007. The results show that, CPT-19 had maximum for seven traits viz, pod length (65.6 mm), 100-pod weight (542.4 g), seed 2D (two dimension) area (351.2 mm²), seed length (27.9 mm), seed breadth (17.4 mm), 100-seed weight (217.9 g) and plant height (164.3 cm). The traits, 100-pod weight and 100-seed weight had a high heritability (98.4%, 96.9%) accompanied with high genetic advance (46.0%, 34.9%). There is a positive significant correlation between 100-pod weight and 100-seed weight traits at both genotypic and phenotypic levels with plant height, collar diameter and volume index at 30 MAS (months after sowing). Volume index expressed a moderate heritability (47.4%) accompanied with high genetic advance (48.4%), indicating that the character is governed by additive gene effects. In divergence study, 24 accessions were grouped into 6 clusters on the basis of non-hierarchical euclidian cluster analysis. The genotypes in cluster IV (CPT-5, CPT-6, CPT-7, CPT-12, CPT-16, CPT-18, CPT-22) and cluster III (CPT-4, CPT-8, CPT-9, CPT-20, CPT-21) were most heterogeneous and can be best used within group hybridization. The wide diversity exists between the cluster V and II, followed by cluster II and I and crosses between CPTs of these clusters may result in substantial segregates. It is revealed that the existence of substantial variation and diversity can be utilized for genetic resource conservation and further tree improvement programmers of the species.     

Species diversity and stability of natural secondary communities with different cutting intensities after ten years

Species diversity and stability of natural secondary communities in different layers with different cutting intensities 10 years later were investigated by calculating Marglef Richness index (R), Shannon-Wiener diversity index (H), Simpson diversity index (P), and Pielou Evenness index (J). Results show that the values of R, H and P among different layers are listed in a decreasing order: the shrub layer > the arbor layer > the herb layer, all the three indices values reach the maximum under medium selective cutting intensity after 10 years. The J value of the shrub layer shows a concave parabolic change with the increase in cutting intensity; it shows a linear increase for the arbor layer, whereas the J value of the herb layer shows an opposite change pattern. The values of R at different cutting intensities had high significant difference, but other indices had not significant difference. The stability of communities at different cutting intensities after 10 years is non-cutting> low selective cutting intensity > medium selective cutting intensity > high selective cutting intensity > extra-high intensity > clear cutting. The stability of communities at different cutting intensities after 10 years shows that the greater cutting intensities, the worse the stability is.