Changes in soil chemistry associated with the establishment of forest gardens on eroded,acidified grassland soils in Sri Lanka

Topsoil properties were determined in forest gardens established about 20 years ago on eroded grassland soils (abandoned tea lands) in the wet zone of the Sri Lankan highlands. They were compared with adjacent, eroded grasslands (abandoned tea lands) on strongly weathered soils vs soils at earlier stages of pedogenic development in a two-way analysis of variance. Soil pH in forest gardens was, on average, 6.1, nearly one unit higher than in the adjacent grasslands. In the garden soils, the cation exchange capacity (CEC measured at pH 4.8) was nearly double, exchangeable calcium concentrations five times and exchangeable magnesium three times as high as in the grasslands soils. Total soil N content was found to be nearly 40% higher in the gardens. Topsoil gravel contents in the gardens were less than half as high as in the grasslands. The increases in exchangeable bases and N in gardens, relative to grasslands, were attributed to increased nutrient retention and acquisition. Higher retention was partly due to the higher CEC_pH4.8, and probably to reduced erosion and increased, continuous fine root density in the garden topsoils. Higher field CEC in gardens was likely to result from generally higher C contents and from the reversal of acidification, presumably caused by base accumulation and decomposition processes. Our results suggest that forest garden establishment on degraded grasslands can lead to accumulation of mobile nutrients in the topsoil, probably due to increased nutrient retention, subsoil uptake and litter input exceeding nutrient uptake by the standing biomass.     

Repellent and stocking guards reduce mammal browsing in eucalypt plantations

Mammalian herbivores regularly browse plantation seedlings. In many areas, seedlings require some form of protection if they are to survive and grow into a productive plantation. Two general approaches for reducing browsing damage to seedlings are to apply chemical repellents and tree guards. Both methods have existed for a long time, and new variations are constantly being developed. Seedling stocking guards, a type of tree guard, are being used operationally in Tasmania, Australia, but there is limited data quantifying their effectiveness and concerns with negative effects on tree performance. Conversely, although proven effective, repellents are not being used, but are potentially cheaper and less problematic. We therefore aimed to determine which is more effective under operational conditions, whether this effectiveness can be improved or extended, and if either treatment has any effects on seedling form or survival. We planted Eucalyptus nitens seedlings with combinations of repellent and stocking guards in six operational plantations to examine and compare their effectiveness. Seedlings were monitored for 12 months to examine treatment longevity. We found that both stocking guards and repellent significantly reduced and delayed browsing severity, with their effects being additive. No negative effects on growth were evident after 12 months, but adverse effects on seedling form warrant further investigation. Both of these methods can be easily and relatively cheaply applied in the nursery before planting, making them appealing options to reduce browsing. However, the ideal method for a given site will depend upon local browsing intensity.     

Effect of different pre-sowing seed treatments on the germination of <Emphasis Type="Italic">Leucaena leucocephala</Emphasis> (Lam.) and <Emphasis Type="Italic">Acacia farnesiana</Emphasis> (L.)

Leucaena leucocephala and Acacia farnesiana are tree species used for several agricultural purposes in the Mediterranean region. The seeds of these species exhibit dormancy, causing delayed germination. Two experiments were conducted to investigate the effect of pre-sowing treatments (scarification, hot water, or soaking) on seed germination of L. leucocephala and A. farnesiana. In one experiment, seeds were exposed to three pre-sowing treatments: control, sandpaper scarification, or soaking in 70°C water for 4, 8, 12, 16, 20, or 24 min. In another experiment, seeds were soaked in 70°C water for 20 min, and then soaked in water at room temperature for an additional 24, 48, or 72 h or blade scarified. In general, soaking the seeds of the two species in hot water was more effective in breaking seed dormancy than scarification. Sandpaper scarification was not effective for either species. Blade scarification increased A. farnesiana seed germination to 56%, indicating that seed dormancy was mainly a consequence of hardseededness. L. leucocephala seeds collected from Jordan University of Science and Technology (JUST) site and soaked in 70°C water for 20 min and then soaked for 24, 48, or 72 h had germination rates above 97%. Our results suggest that blade scarification of A. farnesiana seeds and soaking of L. leucocephala seeds in 70°C water for 20 min are effective treatments to break seed dormancy and enhance seed germination of these vital species.     

Importance of rubberwood in wood export of Malaysia and Thailand

We examined the contribution of rubberwood to the timber export markets of Malaysia and Thailand. In Malaysia, rubberwood has grown from 26% of total exported wood products in 1998 to 35% in 2007. A high proportion of furniture products (80%) is rubberwood, whereas the contribution of rubberwood to other wooden products is less than 20%. Only 10% of sawn timber and logs is rubberwood. In Thailand, rubberwood contributes to around 60% of total exported wood products, arising from a high share of not only furniture products (70%) but also other wood products (around 50%) and sawn timber and logs, which have increased in share from 40% in 1998 to 79% in 2007. We conclude that the high proportion of rubberwood products in the wood export markets of these two countries is a result of: (1) scarcity of raw wood materials because of strict controls on the logging of natural forests; and (2) governmental support to rubberwood production, including financial support to rubber planters and technical assistance to downstream timber processors.     

Estimation of rubberwood production in Cambodia

We estimated the production of rubberwood from 1996 to 2011 in Cambodia. We employed data from interview surveys with three rubberwood processing companies and statistics from estate rubber plantations and wood retailing companies. The result was that the end use of rubberwood in Cambodia was the sawntimber products, being exported to Vietnam and China. The yield rate from rubberwood stumpage into sawn timber was between 11.6 and 14.9%, closely matching the rates of Malaysia and Thailand. The average production of rubberwood roundwood from 1996 to 2011 was 254,697 m³/year, of which sawn timber as well as residuals in secondary processing was 84,559 and 170,138 m³/year, respectively. Although the timber production of Cambodia has declined sharply due to the strict restriction of natural forest logging, rubberwood could explain more than 60% of the domestic industrial roundwood production from 2000. We suggest the necessity of monitoring the expansion of rubber plantations in new rubber producing countries and linking the rubberwood production with the regional wood resource management.     

Micropropagation of <Emphasis Type="Italic">Salvadora</Emphasis><Emphasis Type="Italic">persica</Emphasis>-a tree of arid horticulture and forestry

A micropropagation method for Jaal (Salvadora persica)—a tree of arid horticulture and forestry has been developed. Nodal segments of fresh shoot sprouts originated from axillary buds obtained from a plant around 35–40 years old lopped plant were used as explants for establishment of in vitro cultures. Surface-sterilized explants produced optimum number of shoots through activation of axillary buds on Murashige and Skoog’s (MS) medium containing 8.88 μM BA (6-benzyladenine) + additives (25 mgl⁻¹ each of adenine sulphate, arginine, citric acid, 50 mgl⁻¹ ascorbic acid). The shoot multiplication was influenced by the successive transfer of the mother explants for 4–5 passages. The maximum number (23.1 ± 0.73 shoots per explant) of shoots were regenerated on MS supplemented with 1.11 μM BA + 1.16 μM Kn (Kinetin) + 0.54 μM NAA (α-naphthalene acetic acid). About 90% shoots pulse-treated with a combination of 2460.27 μM Indole-3-butyric acid (IBA) + 494.56 μM NOA (2-naphthoxy acetic acid) were rooted ex vitro on soilrite within 15–18 days. Over 80% cloned plantlets were hardened successfully in a green house and transferred to polybag/pots.     

Phenology,pollination and breeding system of <Emphasis Type="Italic">Aegle marmelos</Emphasis> (Linn.) correa (Rutaceae) from India

Studies on reproductive biology are difficult but useful in species like Aegle marmelos (Linn.) Correa which is of considerable socio-economic importance and possess morphogenetic variation and qualities of wider adaptability to different soils. Cytology, phenology, pollination, breeding system and natural regeneration of wild and cultivated trees from India revealed the existence of diploid (2n = 18) and tetraploid trees (2n = 36) in Pachmarhi hills and only diploid trees in Punjab plains and Shiwalik hills. The diploid and tetraploid trees showed normal meiosis and high pollen fertility. Phenological events which included leaf fall, leaf emergence, floral bud break, flowering and fruiting are nearly the same in wild and cultivated trees. Natural pollen transfer in the species was highly efficient. Levels of fruit set following open pollination was quite high and is reduced considerably following hand pollination probably due to some injury caused to stigma during experiments. Inspite of synchronous nature of anther dehiscence and stigmatic receptivity, selfing in a flower was avoided due to herkogamy. Some selfing, however, occurred through geitonogamous mode as bagging of panicles yielded 12.21 ± 0.99 to 14.12 ± 0.91% fruit set. High pollen ovule ratio (9,250–10,600) indicated toward the obligate outbreeding nature. The species suited to insect and wind mode of pollination. High amount of air borne pollen grains deposited on glycerine smeared glass microscopic slides suggested towards the wind mode of pollination. Though flowers are dull coloured a variety of insects visited the flowers due to sweet fragrance and stamen/pollen as food reward. Among insect pollinators, honey bee (Apis dorsata) was the major and legitimate pollinator while the rest were either minor pollinators or mere visitors. Inspite of high fruit/seed set, natural regeneration through seeds was poor as fallen fruits were destroyed by fungal pathogens and white ants. The species also propagated vegetatively through coppices and root suckers. It lacks agamospermy as bagging of emasculated flowers yielded no fruit. It is inferred that ‘bael’ which lacks agamospermy reproduced successfully through gamospermy (xenogamy and geitonogamy) and vegetative mode (coppices and root suckers). We also concluded that tetraploid trees growing in the Pachmarhi hills with large sized fruits possessed better potentialities in horticulture if planted through root suckers or coppices.     

Improved bondability of wax-treated wood following plasma treatment

In this study, the impact of a plasma treatment using dielectric barrier discharge at atmospheric pressure on wax-treated beech was investigated by surface energy determination and adhesion tests. Measurements of the surface energy revealed a strong increase in surface polarity along with increased surface energy as a result of the plasma treatment, pointing to increased adhesion properties. To evaluate the adhesion properties of a polyvinyl acetate (PVAc) adhesive on beech treated with montan ester wax and synthetic Fischer–Tropsch wax, a special peel test was applied. This peel test provided evidence of increased adhesion of the PVAc after plasma treatment of both materials investigated.     

Longitudinal growth strain as a log and wood quality predictor for plantation-grown <Emphasis Type="Italic">Eucalyptus nitens</Emphasis> sawlogs

Peripheral longitudinal growth strain (LGS) was measured on a total of 81, 22-year-old pruned Eucalyptus nitens trees from five thinning treatments in a plantation thinning trial in Tasmania. Growth strain data were gathered at breast height on each tree using the CIRAD-Forêt method. The effects of thinning treatment and tree diameter on LGS and its relationships to solid-wood traits determined in a processing trial were examined. LGS was significantly higher in the direction of the prevailing wind and was not significantly affected by either thinning treatment or tree diameter. An index of log end splitting was positively related to tree diameter, sawlog position (upper/lower), and LGS, which explained up to an additional 20% of the variance after tree diameter and log position were accounted for in a linear regression model. High LGS and log end splitting were significant indicators of increased board end splitting.