励磁功率单元主回路快速故障诊断策略

分析总结了发电机组励磁系统功率单元的故障类型和常见故障,通过Matlab仿真功率单元主回路故障类型,重点研究基于故障频谱分析的定量故障特征提取和故障分类,提出了一种快速针对功率单元主回路的故障诊断真值表法,最后通过实验平台验证故障类别,结果表明：该方法能够正确有效地诊断出功率单元主回路具体的故障晶闸管,为励磁系统功率单元故障诊断提供依据。     

Design of Preparation of High Grade WC Powder from Voilet WO2.72

Synthesis of W powder by oxide reduction method and fabrication of WC powder by carbonization of W powder are investigated, using violet and blue tungsten oxides as the raw materials, respectively, for the preparation of excellent high grade WC powder. Microstructure and properties of the two raw materials and the obtained W powders and WC powders are studied. The results show that violet tungsten is a suitable raw material for synthesizing uhrafine W powder using the conventional method. The W and WC powders produced from the violet tungsten oxide have better physical properties than those produced from blue tungsten oxide.     

VISAR Data Reducing Method and Its Application to Impact Experiment

Identification and adjustment on the disfigurements of original data of VISAR are probed by developing software for VISAR data reducing based on measure theory. Then the software is applied to plate impact experiment of ceramics. The disfigurements of light intensity data are identified and adjusted through Lissajou~ figures. The results indicate that VISAR data are reduced quickly and effectively by the software, and the exact free surface velocity history is obtained.     

Biodegradation of Linear Alkyl Benzene Sulphonate

The paper researches on the degradation of LAS (Linear Alkyl benzene Sulphonate) by combining AS1.860 immobilized with low intensity ultrasonic irradiation. The paper also discusses the influence of pH, rotary velocity, LAS concentration and the condition of low intensity ultrasonic irradiation on the degradation of LAS, the degradation rate of LAS is the main index of our experiment, the results of orthogonal test shows that low ultrasonic irradiation can increase the metabolizing of microorganism cells and facilitate the biodegradation of immobilized cells to LAS, here we research the degradation condition of 50mg/L LAS simulation wastewater with low ultrasonic irradiation, and the results show that the influence is obvious, the optimization degradation rate is about 83%, nine point five percent higher than that of the immobilized cells without ultrasonic irradiation.     

Analysis of the Sediment Development and Trend In Jinshajiang River Drainage Area

Jinshajiang River, which has a drainage area of 485,100 Km 2, average flux of 142.9 billion m 3, and soil conveyance of 247 million t/a, is the largest branch of Changjiang river. It is also the largest soil resource of the Three Gorges reservoir and upper reach of Changjiang River. To research the development and trend of Jinshajiang sediment not only has a relation to Jinshajiang water resource strategy, but also has important meaning to control the silt in Three Gorges reservoir and the Changjiang water resource development. The paper statistically analyses the flux and sediment conveyance of the Pingshan station, which is the primary hydrological station in the Jinshajiang River Drainage Area. Through several non-parameter statistical methods such as Spearman order correlativity check, Kendell order correlativity check, and linear regression check, the paper concludes that the sediment evolvement trend of Pingshan station is not distinct.     

Case- carburization Numerical Modeling and Craft Optimization on Steel Parts of Various Shapes

According to the diffusion equation of carburizing process and its boundary conditionand initial condition, various shapes steel parts are modeled under various case carburize craft parameters, concentration distribution curves have been obtained. Various craft parameters are compared, and carburizing temperature has more influence on carbon concentration distribution. Various shapes steel parts' carbon concentration distribution curves have some difference. According to the carbon concentration distribution curve, craft parameters can be adjusted in order to obtain the best carburizing craft.     

Effect of the Silicic Acid Polymerization Degree on the Coagulating Property of Polyalumium Silicate Chloride

Polyaluminum silicate is a new type of inorganic macromolecular flocculants, which is developed as a complex product in recent years on the base of polyalumium flocculant and polysilicic acid flocculant. Sodium silicate is diluted to the concentration of 3.0% SiO 2 with distilled water. The solution was adjusted to pH 4.5 with sulphate acid and kept at quiescency for different time to get polysilicic acid with different polymerization degrees. Using polysilicic acid prepared and aluminium chloride as materials, a series of polyaluminium silicate chlorides(PASC) with different basicities(B), Al/Si molar ratios and polymerization degree of silicic acid are prepared by copolymerization technique. The Al-Ferron timed complex colorimetric method is applied to characterize species distribution of PASC and to study its influence factors. The interaction between hydrolyzed aluminum species and polysilicic acid with different polymerization degrees in PASC is discussed.The flocculant prepared is applied to the treatment of commercial concrete wastewater. The turbidity removal of commercial concrete wastewater is up to 97% when a PASC, prepared with polysilicic acid of 145 min polymerization degree.