工业大麻割晒机的三维仿真设计

针对当前我国工业大麻割晒机研究现状与发展需求,运用三维软件UG设计了一款工业大麻割晒机,包括夹持输送机构、切割机构、传动机构、机架等。首先对星轮式拨禾机构、往复式切割器等零部件进行三维建模,然后根据各零部件之间的准确约束进行整机装配,并对样机各运转部件进行了干涉检查,仿真结果表明所设计的工业大麻割晒机符合农艺要求,并为后续的虚拟样机运动仿真、割台的结构优化奠定了良好的基础,提高了样机的研发速度。     

Influence of salinity and moisture on the threshold shear velocity of saline sand in the Qarhan Desert,Qaidam Basin of China: A wind tunnel experiment

Determination of the threshold shear velocity is essential for predicting sand transport, dust release and desertification. In this study, a wind tunnel experiment was conducted to evaluate the influence of salinity and moisture on the threshold shear velocity of saline sand. Saline sand samples (mean particle size of 164.50-186.08 μm and the total silt, clay and salt content of 0.80%-8.25%) were collected from three saline sand dunes (one barchan dune and two linear dunes) in the Qarhan Desert, Qaidam Basin of China. Original saline sand samples were placed in two experimental trays for wet and dry processing to simulate deliquescence and desiccation, respectively. Surface moisture content ranging from 0.30% to 1.90% was generated by the steam method so that the saline sand can absorb water in a saturated water vapor environment. The motion of sand particles was determined by the observers with a solid laser. The laser sheet (0.80 cm thick), which was emitted by the solid laser, horizontally covered the sand surface and was bound to the sand. Results show that the cohesion of saline sand results from a combination of salt and water. The threshold shear velocity increases exponentially with the increase in crust thickness for the linear sand dunes. There is a positive linear correlation between the original moisture content and relative threshold shear velocity. The threshold shear velocity of dewatered sand is greater than that of wet sand with the same original moisture content. Our results will provide valuable information about the sand transport of highly saline soil in the desert.     

增密减氮对弱筋小麦‘宁麦13’产量和品质的影响

为实现弱筋小麦优质稳产,解决当前弱筋小麦存在品质稳定性差的问题。本试验以弱筋小麦‘宁麦13’为试材,结合方差分析等方法研究增密减氮对弱筋小麦的产量、群体质量指标以及籽粒品质的影响。结果表明,在240 kg/hm²施氮水平条件下,随着密度的增加,小麦LAI、干物质积累量均呈先增加后下降的趋势,密度超过240×10⁴/hm²会导致LAI、干物质积累量、产量下降。在240×10⁴/hm²密度条件下,施氮量超过240 kg/hm²会导致小麦叶面积指数、SPAD值、花后干物质积累量和产量下降。适当的增密减氮有利于提高弱筋小麦的优质稳产,而过量增密减氮则会导致小麦产量下降,品质不稳定。为实现产量和品质的最优化,生产上推荐采用种植密度为240×10⁴/hm²,施氮量为180 kg/hm²,氮肥运筹为7:1:2:0的栽培模式。     

江苏淮北地区17个优质粳稻品种适应性筛选试验

为促进优质食味粳稻品种在江苏淮北地区的推广应用,于2019年引进17个优质食味粳稻品种,以徐稻9号为对照,从生育期、抗逆性、丰产性、品质等方面进行综合评价。结果表明,供试的17个品种均能在安全齐穗期内齐穗(该地区安全齐穗期为9月15日前),生育期均处于安全期范围内。比对照增产的品种有7个,其中瑞华1903产量最高,达10888.5 kg/hm^2;圣稻022生育期最短,仅131 d;南粳518株高最矮,为95.7 cm。品质测定结果显示,武运粳1706整精米率和直连淀粉含量最高,分别达75.0%和16.2%;南粳5718、南粳518、南粳2728直链淀粉含量在10.0%左右,为优良食味粳稻品种。通过产量水平、农艺性状、生育期和品质等综合分析认为,供试品种中南粳518、南粳2728丰产性较好、株高较矮,且均为优良食味品种,生产中不仅产量潜力高、米质较优,同时早熟能有效规避低温危害和缓解淮北地区稻麦茬口季节紧张矛盾,适合淮北中熟中粳稻区人工栽插、机插和直播条件下大面积推广应用。