农杆菌介导的蝴蝶兰基因转化系统的建立

 针刺后的蝴蝶兰‘White Hikaru’的类原球茎(PLB)，与含绿色荧光蛋白基因( )和潮霉素磷酸转移酶基因(^p￡)的pCAMBIA 1300一SmGFP的根瘤农杆菌LBA4404 共培养，培育出了转基因的蝴蝶兰。经绿色荧光蛋白检测和Southern印迹，证实了再生植株中含cop基因和hpt基因。     

Fucoidan and Lung Function: Value in Viral Infection

Compromised lung function is a feature of both infection driven and non-infective pathologies. Viral infections—including the current pandemic strain SARS-CoV-2—that affect lung function can cause both acute and long-term chronic damage. SARS-CoV-2 infection suppresses innate immunity and promotes an inflammatory response. Targeting these aspects of SARS-CoV-2 is important as the pandemic affects greater proportions of the population. In clinical and animal studies, fucoidans have been shown to increase innate immunity and decrease inflammation. In addition, dietary fucoidan has been shown to attenuate pulmonary damage in a model of acute viral infection. Direct inhibition of SARS-CoV-2 in vitro has been described, but is not universal. This short review summarizes the current research on fucoidan with regard to viral lung infections and lung damage.     

N-acetylcysteine manipulation fails to elicit an increase in glutathione in a teleost model

Levels of oxidative stress can be affected by a range of compounds including toxins and pharmaceuticals. Antioxidants are important protective compounds which counteract the damaging effects of oxidative stress. Glutathione (GSH) is one of the main antioxidants for many organisms and can be synthesized from administered N-acetylcysteine (NAC). NAC has therefore often been used in a wide range of taxa to manipulate levels of GSH. Our objective was to validate this approach in a wild temperate teleost fish model, the brown trout (Salmo trutta). We used intracoelomic injections of NAC in saline and vegetable shortening, at two different concentrations (100 and 400 mg/kg), with the appropriate controls and shams, under controlled laboratory settings. We found that NAC failed to elicit an increase in GSH over three time periods and concluded that NAC is not an effective method to enhance GSH levels in teleost fish using the concentrations and vehicles tested here. We emphasize the importance of validation studies across all new species/taxa when possible and suggest that more investigation is required with regard to NAC manipulation in fish if this approach is to be used.     

Reduced Pressure Curing on Polycarbosilane Precursor for Synthesis of Silicon Carbide Fiber

Low pressure curing method with iodine vapor was used on low softening temperature polycarbosilane (PCS) precursor for fabrication of continuous SiC fiber at relatively low temperature. The low curing temperature can provide with a wide range of softening temperature PCS precursors, especially with low softening PCSs, which have a good spinnability, but many difficulties with conventional oxidation curing method. The low pressure curing method having the presence of iodine vapor have shown the more positive effect on pyrolysis with early stage crystallization of β-SiC at 1300 °C. Crystal size of β-SiC, cured at 0.008 kPa is around 2–3 nm larger than cured at 101 kPa. In addition, the higher tensile strength of SiC fiber at elevated temperature can be obtained at 0.008 kPa with a value of 2.1 GPa, compare to 1.3 GPa at 101 kPa of curing pressure condition.     

Preparation of Epoxy Shape Memory Polymers for Deployable Space Structures Using Flexible Diamines

In order to develop epoxy shape memory polymers (ESMPs) with high switching temperature and excellent toughness for deployable space structures, the crosslink density and chain flexibility of candidate ESMP samples were tunned by adding two flexible poly(oxypropylene) diamines, Jeffamine D-230 (D230) and Jeffamine D-400 (D400), as a secondary curing agent. The desired switching temperature of ESMPs for deployable space structures was set within the range of 120-135°C. By adding D230 and D400, the switching temperature of the ESMPs could be adjusted to within this range by increasing their crosslink density, and their impact strength could be significantly increased due to the stress relaxation properties of the diamines’ flexible molecular chains. The modulus and tensile strength of the ESMPs increased, but elongation at break decreased, in proportion to the diamine content. The ESMPs with a suitable switching temperature for deployable space structures had a high elongation at break greater than 22 % and good shape recovery and shape fixity ratios. The larger the value of shape recovery ratio, the faster the shape recovery speed.     

Simulating bimodal tall fescue growth with a degree‐day‐based process‐oriented plant model

Plant growth simulation models have a temperature response function driving development, with a base temperature and an optimum temperature defined. Such models function well when plant development rate shows a continuous change throughout the growing season. This approach becomes more complex as it is extended to cool‐season perennial grasses with a dormant period and bimodal growth curves. The objective of this study was to develop such a bimodal growth model for tall fescue (Schedonorus arundinaceus (Schreb.) Dumort) in the Midwest USA based on multiyear measurement trials. Functions for bimodal growth were incorporated into the ALMANAC model and applied to tall fescue using published tall fescue yields for a variety of sites and soils. Fields of cultivars “Kentucky 31” and “BarOptima Plus E34” were divided into paddocks and sampled weekly for dry‐matter accumulation. These biomass estimates were used to derive weekly growth values by differences between sequential weekly samplings. The measured values were compared to a single tall fescue simulation each year on one soil. Using these results, the ALMANAC model was modified and tested against mean reported tall fescue yields for 11 sites, with one to three soils per site. When we introduced midsummer dormancy into ALMANAC, we assumed dormancy began on the longest day of the year and lasted until the photoperiod was 0.68 hr shorter than the longest. ALMANAC simulated previously reported tall fescue yields well across the range of sites. Thus, ALMANAC shows great promise to simulate bimodal growth in this common cool‐season grass.     

The impact of supplementation with Rhagodia preissii and Atriplex nummularia on wool production,mineral balance and enteric methane emissions of Merino sheep

The Australian perennial shrubs, oldman saltbush (Atriplex nummularia) and rhagodia (Rhagodia preissii), can complement the diets of sheep grazing moderate‐quality cereal residues. We compared liveweight change, organic matter digestibility, nitrogen and mineral balance, wool growth and methane emissions of Merino wethers offered oaten hay (OMD 622 g kg^?1 DM; N 9.74 g kg^?1 DM) with and without shrub biomass (substituted at 25% of OM). Diets were fed at restricted levels for 1 month. Substituting hay with shrub biomass significantly decreased liveweight loss, increased clean wool growth and increased apparent absorption of phosphorus compared to the hay alone. Substitution of hay with both saltbush and rhagodia led to over 23% greater clean wool growth. Nitrogen balance and apparent digestion of organic matter, calcium and magnesium did not vary significantly between animals on the diets. Wethers on the rhagodia and hay diets had similar enteric methane emissions, while animals offered the saltbush diet had significantly higher emissions (L/OM intake). When methane is expressed in terms of wool growth, animals on the rhagodia diet produced 26% less methane for every gram of wool.     

Facile In-situ Polymerization of Thermotropic Liquid Crystalline Polymers as Thermally Conductive Matrix Materials

Although thermally conductive composites that can efficiently dissipate the heat generated from electronic devices are in high demand, most neat polymers used as matrix materials are problematic because they have poor thermal conductivities. The low thermal conductivity of polymeric materials is caused by structural defects; therefore, it can be improved by increasing the orientational regularity of the polymer chains. Here, main-chain liquid crystalline polymers (LCPs) were designed and synthesized to investigate the effects of liquid crystallinity-induced structural regularity on the thermal conductivity of the polymers. In addition, an in-situ polymerization method was devised for commercial applicability, and the thermal conductivity of the obtained polymer was compared to that of a conventionally polymerized polymer having the same structure. The designed polymers exhibited thermotropic liquid crystalline characteristics, and the polymer with longer spacers between the rigid segments showed relatively higher thermal conductivity exceeding 0.5 W·m^-1· K^-1 after sample preparation by injection molding. In addition, X-ray diffraction analysis revealed that the differences in the thermal conductivity, depending on the molding temperature during specimen preparation, were caused by variations in chain orientation within the same polymer. Based on the obtained results, it was concluded that LCPs are strong candidate matrix materials for thermally conductive composites; the suggested in-situ polymerization method could be applied practically to the polymerization of polyester-type LCPs.     

Understanding root,tuber, and banana seed systems and coordination breakdown: a multi-stakeholder framework

Vegetatively propagated crop (VPC) seed tends to remain true to varietal type but is bulky, often carries disease, and is slow to produce. So VPC seed needs to be handled differently than that of other crops, e.g., it tends to be sourced locally, often must be fresh, and it is less often sold on the market. Hence, a framework was adapted to describe and support interventions in such seed systems. The framework was used with 13 case studies to understand VPC seed systems for roots, tubers, and bananas, including differing roles and sometimes conflicting goals of stakeholders, and to identify potential coordination breakdowns when actors fail to develop a shared understanding and vision. In this article, we review those case studies. The framework is a critical tool to (a) document VPC seed systems and build evidence; (b) diagnose and treat coordination breakdown and (c) guide decision-makers and donors on the design of more sustainable seed system interventions for VPCs. The framework can be used to analyze past interventions and will be useful for planning future VPC seed programs.     

Evaluation of the contact coolness of fabric using infrared thermogram imagery

This study develops a method to evaluate the contact coolness of fabric using the infrared thermal image of a small test specimen. By using infrared thermal images of 7 types of fabrics developed as cool fabric, the average temperature difference on the surface of the human palm and a heating plate, with and without fabric was measured and this was used for the scale of the ability of the fabric to cool by touch. By comparing the average temperature differences with the Qmax of a fabric, absorption coolness, subjective contact coolness, and correlations were investigated. More heat is transmitted via fabric when the Qmax value is higher and average temperature difference of thermogram image is smaller, which means the coolness perceived by the skin becomes stronger. Fabric with a small average temperature difference in infrared thermal imaging had a high Qmax value and it was evaluated as having strong coolness in subjective evaluation too. However, it was found that there was no relationship between average temperature differences and absorption coolness. Therefore, it can be concluded that the evaluation of fabrics’ coolness using infrared thermal image is useful when evaluating contact coolness at the point of physical contact. In addition, by comparing the methods using the palm and heating plate, the method using the palm showed higher correlation with Qmax (-.828, p<0.05). Therefore, we confirmed that evaluating the coolness of small test specimens using an infrared thermal camera and the palm is effective.