Temperature-dependent index of mitotic interval τ0 in greenling Hexagrammos otakii

ABSTRACT:   The aim of this study was to establish effective procedures for chromosome manipulation in greenling Hexagrammos otakii Jordan et Starks, which has enormous aquacultural potential. To accomplish this, temperature-dependent measurements of the mitotic intervals (τ₀) were carried out. The τ₀ in this fish was determined by averaging the duration of the first and third embryonic divisions at temperatures ranging 5–25°C. At higher temperatures, eggs developed faster and underwent more identical development. For greenling, τ₀ were 341.1 ± 3.60 min at 5°C, 275.5 ± 4.53 min at 10°C, 189.7 ± 6.93 min at 15°C, 99.2 ± 8.27 min at 20°C and 34.2 ± 8.74 min at 25°C. There were strong, negative correlations between the τ₀ and water temperatures at all temperatures studied ( Y  = −79.3 X  + 425.3, R ² = 0.9968, where Y is the mitotic interval and X is the temperature).     

Sequential sub-passage decreases the differentiation potential of canine adipose-derived mesenchymal stem cells

Adipose-derived mesenchymal stem cells (AD-MSCs) are abundant in adipose tissue from animals of all ages, are easily isolated, can differentiate into multi-lineage cells, and have a clinical application. This promising potential may only be achieved if the cells are expanding in a large number while maintaining their stemness in sequential passages. In this study, canine AD-MSCs (cAD-MSCs) were individually isolated from five dogs and subjected to proliferative culture with seven sub-passages. The cells at each sub-passage were characterized for properties associated with multipotent MSCs such as proliferation kinetics, expression of MSCs-specific surface markers, expression of molecules associated with self-renewal and differentiation capabilities into mesodermal lineage cells. Proliferation of the cells plateaued at passage 5 by cumulative population doubling level, while cell doubling time gradually increased with passage. MSCs surface markers (CD44, CD90, and CD105) and molecules (Oct 3/4, Sox-2, Nanog and HMGA2) associated with self-renewal were all expressed in the cells between passages 1 to 6 by RT-PCR. In addition, the cells at passage 1, 3 or 6 underwent adipogenic and chondrogenic differentiation under specific induction conditions. However, the level of adipogenic and chondrogenic differentiation was negatively correlated with the number of sub-passage. The present study suggests that sequential sub-passages affect multipotent properties of cAD-MSCs, which should be considered in their therapeutic application in regenerative medicine.     

Studies of Spatial Variabilities of Airborne Metals Across Four Different Land-Use Types

The concentrations of seven metals (Fe, Pb, Mn, Ni, Cd, Cu, and Cr) associated with the total suspended particles (TSPs) were analyzed regularly from the four sampling sites of different land-use types within the boundary of Won Ju city, Korea during1991 through 1995. The mean concentration data for the four sitesselected to represent grassland, residential, commercial, and industrial areas fell in a relatively broad range of: 1440–2240 (Fe), 88–326 (Pb), 2–4 (Cd), 8–21 (Cr),194–469 (Cu), 32–95 (Mn), and 15–26 (Ni) ng m^-3. The data, when compared across the different study sites, generally exhibited systematic trends in accordance withthe site-selection scheme; most metals exhibited increase in their concentration levels across grassland through industrial site. Examinations of data also indicated the possibility that spatial factors play complicated roles on both long- and short-term distribution of metals. From all four sites studied, severalmetals (e.g., Fe, Pb, Mn, Ni, and Cd) consistently showed theirseasonal trends characteristic of high winter/spring values. In addition, the analysis of long-term distribution trendsindicated that the concentrations of many metals droppedsteadily at four sites (e.g., Fe, Pb, and Mn). When these metaldata were compared among different sites (land-use types), significant correlations were seen frequently for such metals asFe, Pb, Cd, and Cr. Investigations of inter-metal relationshipsindicated that strong correlations were more abundant from such metal pairs as Fe-Pb, Pb-Mn, and Mn-Fe. In addition, the cases for such strong correlations were seen more abundantly from grassland (and residential) than industrial (and commercial) site. Factor analysis was also conducted to distinguish sourceprocesses affecting metal distributions in the study area. Results of this analysis suggest that the metal distributions ofthe individual sites may be affected most significantly by distinctive source processes of their own.     

Degradation of Pentachlorophenol by Ozone Generated by a Pulsed Power Corona Discharge

Ozone, generated by a pulsed power corona discharge, was usedto degrade pentachlorophenol (PCP). The degradation of PCP wasdriven by ozone and superoxide radical (SOR). The coronadischarge reactor was made without glass dielectric material,not only to reduce the power consumption but also to enhancethe formation of the SOR. In addition, the corona dischargedevice was operated with pin-plate or pin-ring typeelectrodes, which had a normal and parallel oxygen flow,respectively. The ozone generated in the corona dischargereactor was in the range of 0-0.39 mg min^-1. To confirm the generation of SOR, the hydrogen peroxide was measuredunder acidic conditions without ozone effects. PCP at 10 ppm wascompletely degraded in 10 min in both electrode types withnegative high DC voltage. The degradation rate of PCP was muchgreater at a high frequency (1 kHz). Oxalic, malonic andglyoxylic acids were generated as final products of the reaction.     

Monitoring of Acid Rain over Korean Peninsula

In order to investigate the temporal and spacial deposition characteristics of acid rain, five monitoring sites were set up in the central part of Korean Peninsula. Rainwater samples were collected by wet-only sampler from 1992 to 1997. The pH and conductivity values were measured and the major water soluble ionic components were also analyzed. Ion balance between anion and cation sum was calculated to check out the data quality of samples. The acidity of rainwater was influenced by the local sources and meteorological factors such as surface wind, moving path of storm, precipitation process, and so on. Backward trajectories were depicted to investigate the effect due to moving path of weather system. The rainwater shows strong acidity in winter and weak in summer. The pH and ion concentrations were highly dependent on synoptic weather system. In addition, we sampled fog/cloud at Mt. Sobaek (BAPMoN Station) from June to August 1995 and characterized the fog/cloud chemistry according to surface wind system of sampling site. The volume-weighted mean pH of fog/cloud samples is 4.39 at Mt. Sobaek during the sampling period.     

Posttranslational N-myristoylation of BID as a molecular switch for targeting mitochondria and apoptosis

Many apoptotic molecules relocate subcellularly in cells undergoing apoptosis. The pro-apoptotic protein BID underwent posttranslational (rather than classic cotranslational) N-myristoylation when cleavage by caspase 8 caused exposure of a glycine residue. N-myristoylation enabled the targeting of a complex of p7 and myristoylated p15 fragments of BID to artificial membranes bearing the lipid composition of mitochondria, as well as to intact mitochondria. This post-proteolytic N-myristoylation serves as an activating switch, enhancing BID-induced release of cytochrome c and cell death.     

Theoretical analysis of the melt spinning process of poly(trimethylene terephthalate) fibers

Profiles development of the melt spinning process of poly(trimethylene terephthalate) (PTT) was simulated by a numerical method. The spinning speed of 3 km/min to 5 km/min was analyzed and the characteristic of PTT spinning process was compared with that of poly(ethylene terephthalate) (PET). Velocity development of PTT was slower than that of PET. Although PTT’s spinning temperature was lower than PET’s, the PTT solidified slower because of a smaller super-cooling and the large specific heat capacity. The diameter profile of PTT decreases gradually in comparison with that of PET. PTT’s strain rate has a broader distribution than PET’s and its maximum ranged from 541 to 570 s⁻¹ for PET and 136 to 149 s⁻¹ for PTT. PTT’s tensile stress was smaller than PET’s.     

Alkaline weight reduction monitoring of sea-island type polyamide microfiber fabrics

The alkaline dissolution behavior of sea-island type polyamide microfibers were successfully monitored using a cationic dye staining method. Weight reduction behavior of the alkali-treated microfiber fabrics and the treated fabrics stained with cationic dye were investigated in a comparative manner. The termination of dissolution monitored by both methods was also confirmed by scanning electron microscopy.     

Measurement of residual stresses in injection molded polymeric part by applying layer-removal and incremental hole-drilling methods

Injection molding is a flexible production method for manufacturing polymer products, but introduces residual stresses. This study employs the incremental hole-drilling method to measure the residual stresses in injection molded parts. To compare the results, the layer-removal method is utilized for measurement of residual stresses. A commercial software, Moldflow, is used for prediction of residual stresses in molded plastic parts. Results obtained by experiments and Moldflow analysis are compared. The incremental hole-drilling method is applicable to determination of the residual stresses in complex geometries and can be used as an adoptable technique for measurement of the residual stress in polymeric materials.