Micropropagation of <Emphasis Type="Italic">Salvadora</Emphasis><Emphasis Type="Italic">persica</Emphasis>-a tree of arid horticulture and forestry

A micropropagation method for Jaal (Salvadora persica)—a tree of arid horticulture and forestry has been developed. Nodal segments of fresh shoot sprouts originated from axillary buds obtained from a plant around 35–40 years old lopped plant were used as explants for establishment of in vitro cultures. Surface-sterilized explants produced optimum number of shoots through activation of axillary buds on Murashige and Skoog’s (MS) medium containing 8.88 μM BA (6-benzyladenine) + additives (25 mgl⁻¹ each of adenine sulphate, arginine, citric acid, 50 mgl⁻¹ ascorbic acid). The shoot multiplication was influenced by the successive transfer of the mother explants for 4–5 passages. The maximum number (23.1 ± 0.73 shoots per explant) of shoots were regenerated on MS supplemented with 1.11 μM BA + 1.16 μM Kn (Kinetin) + 0.54 μM NAA (α-naphthalene acetic acid). About 90% shoots pulse-treated with a combination of 2460.27 μM Indole-3-butyric acid (IBA) + 494.56 μM NOA (2-naphthoxy acetic acid) were rooted ex vitro on soilrite within 15–18 days. Over 80% cloned plantlets were hardened successfully in a green house and transferred to polybag/pots.     

Phenology,pollination and breeding system of <Emphasis Type="Italic">Aegle marmelos</Emphasis> (Linn.) correa (Rutaceae) from India

Studies on reproductive biology are difficult but useful in species like Aegle marmelos (Linn.) Correa which is of considerable socio-economic importance and possess morphogenetic variation and qualities of wider adaptability to different soils. Cytology, phenology, pollination, breeding system and natural regeneration of wild and cultivated trees from India revealed the existence of diploid (2n = 18) and tetraploid trees (2n = 36) in Pachmarhi hills and only diploid trees in Punjab plains and Shiwalik hills. The diploid and tetraploid trees showed normal meiosis and high pollen fertility. Phenological events which included leaf fall, leaf emergence, floral bud break, flowering and fruiting are nearly the same in wild and cultivated trees. Natural pollen transfer in the species was highly efficient. Levels of fruit set following open pollination was quite high and is reduced considerably following hand pollination probably due to some injury caused to stigma during experiments. Inspite of synchronous nature of anther dehiscence and stigmatic receptivity, selfing in a flower was avoided due to herkogamy. Some selfing, however, occurred through geitonogamous mode as bagging of panicles yielded 12.21 ± 0.99 to 14.12 ± 0.91% fruit set. High pollen ovule ratio (9,250–10,600) indicated toward the obligate outbreeding nature. The species suited to insect and wind mode of pollination. High amount of air borne pollen grains deposited on glycerine smeared glass microscopic slides suggested towards the wind mode of pollination. Though flowers are dull coloured a variety of insects visited the flowers due to sweet fragrance and stamen/pollen as food reward. Among insect pollinators, honey bee (Apis dorsata) was the major and legitimate pollinator while the rest were either minor pollinators or mere visitors. Inspite of high fruit/seed set, natural regeneration through seeds was poor as fallen fruits were destroyed by fungal pathogens and white ants. The species also propagated vegetatively through coppices and root suckers. It lacks agamospermy as bagging of emasculated flowers yielded no fruit. It is inferred that ‘bael’ which lacks agamospermy reproduced successfully through gamospermy (xenogamy and geitonogamy) and vegetative mode (coppices and root suckers). We also concluded that tetraploid trees growing in the Pachmarhi hills with large sized fruits possessed better potentialities in horticulture if planted through root suckers or coppices.     

Improved bondability of wax-treated wood following plasma treatment

In this study, the impact of a plasma treatment using dielectric barrier discharge at atmospheric pressure on wax-treated beech was investigated by surface energy determination and adhesion tests. Measurements of the surface energy revealed a strong increase in surface polarity along with increased surface energy as a result of the plasma treatment, pointing to increased adhesion properties. To evaluate the adhesion properties of a polyvinyl acetate (PVAc) adhesive on beech treated with montan ester wax and synthetic Fischer–Tropsch wax, a special peel test was applied. This peel test provided evidence of increased adhesion of the PVAc after plasma treatment of both materials investigated.     

Longitudinal growth strain as a log and wood quality predictor for plantation-grown <Emphasis Type="Italic">Eucalyptus nitens</Emphasis> sawlogs

Peripheral longitudinal growth strain (LGS) was measured on a total of 81, 22-year-old pruned Eucalyptus nitens trees from five thinning treatments in a plantation thinning trial in Tasmania. Growth strain data were gathered at breast height on each tree using the CIRAD-Forêt method. The effects of thinning treatment and tree diameter on LGS and its relationships to solid-wood traits determined in a processing trial were examined. LGS was significantly higher in the direction of the prevailing wind and was not significantly affected by either thinning treatment or tree diameter. An index of log end splitting was positively related to tree diameter, sawlog position (upper/lower), and LGS, which explained up to an additional 20% of the variance after tree diameter and log position were accounted for in a linear regression model. High LGS and log end splitting were significant indicators of increased board end splitting.     

Soil biological properties under different tree based traditional agroforestry systems in a semi-arid region of Rajasthan,India

An investigation was carried out in an Entisol at farmers’ field in Jaipur district, Rajasthan, India during 2002–2004 to evaluate the effect of traditionally grown trees on soil biological characteristics. Traditionally grown trees in farm lands for study consisted of Prosopis cineraria (L.), Dalbergia sissoo (Roxb.) ex DC, Acacia leucophloea (Roxb.) and Acacia nilotica (L.) Del. having a canopy diameter of 8 m. Results revealed significant and substantial improvement in soil biological activity in terms of microbial biomass C, N and P, dehydrogenase and alkaline phosphatase activity under different tree based agroforestry systems as compared to a no tree control (cropping alone). Soil microbial biomass C, N and P under agroforestry varied between 262–320, 32.1–42.4 and 11.6–15.6 μg g⁻¹ soil, respectively, with corresponding microbial biomass C, N and P of 186, 23.2 and 8.4 μg g⁻¹ soil under a no tree control. Fluxes of C, N and P through microbial biomass were also significantly higher in P. cineraria based land use system followed by D. sissoo, A. leucophloea and Acacia nilotica in comparison to a no tree control. Thus, it is concluded that agroforestry system at farmers’ field enhance soil biological activity and amongst trees, P. cineraria based system brought maximum and significant improvement in soil biological activity.     

Anisotropy of wood vibrational properties: dependence on grain angle and review of literature data

The anisotropy of vibrational properties influences the acoustic behaviour of wooden pieces and their dependence on grain angle (GA). As most pieces of wood include some GA, either for technological reasons or due to grain deviations inside trunks, predicting its repercussions would be useful. This paper aims at evaluating the variability in the anisotropy of wood vibrational properties and analysing resulting trends as a function of orientation. GA dependence is described by a model based on transformation formulas applied to complex compliances, and literature data on anisotropic vibrational properties are reviewed. Ranges of variability, as well as representative sets of viscoelastic anisotropic parameters, are defined for mean hardwoods and softwoods and for contrasted wood types. GA-dependence calculations are in close agreement with published experimental results and allow comparing the sensitivity of different woods to GA. Calculated trends in damping coefficient (tanδ) and in specific modulus of elasticity (E′/ρ) allow reconstructing the general tanδ-E′/ρ statistical relationships previously reported. Trends for woods with different mechanical parameters merge into a single curve if anisotropic ratios (both elastic and of damping) are correlated between them, and with axial properties, as is indicated by the collected data. On the other hand, varying damping coefficient independently results in parallel curves, which coincide with observations on chemically modified woods, either “artificially”, or by natural extractives.     

Characteristic fragment ions from lignin and polysaccharides in ToF–SIMS

Different model compounds for lignin, hemicelluloses and pectins were studied by time-of-flight secondary-ion mass spectrometry (ToF–SIMS). Mass spectra of Klason lignin from normal and compression spruce wood, aspen wood and wheat straw were compared. Spectra of brominated spruce and aspen wood sections showed fragment ions attributed to brominated guaiacyl and syringyl units in lignin at m/z 215, 217, 229 and 231, and m/z 245, 247, 249 and 261, respectively. Spectra of mono-, oligo- and polysaccharides showed fragment ions at m/z 127 and 145 characteristic for hexose units, and ions at m/z 115 and 133 characteristic for pentose units. The same ions were detected in spectra of delignified spruce and aspen wood sections. Labelling of anionic groups by Sr²⁺ ions followed by ToF–SIMS analysis showed that pectins were present at specific locations on the surfaces of spruce and aspen wood sections still after delignification with hydrogen peroxide in acetic acid.     

Study on the effect of nano-silver impregnation on mechanical properties of heat-treated <Emphasis Type="Italic">Populus nigra</Emphasis>

The present study is aimed at investigating the effect of heat treatment of nano-silver-impregnated Populus nigra on weight loss, modulus of rupture (MOR), modulus of elasticity (MOE), and compression parallel to grain. Specimens were impregnated with 200 PPM water-based solution of nano-silver particles at 2.5 bar in a pressure vessel. For heat treatment, both nano-silver-impregnated and simple specimens were kept for 24 h at 45°C and then further for 24 h at 145°C and finally for 4 h at 185°C. MOR decreased from 529 to 461 kg/cm² in heat-treated specimens; MOE and compression parallel to grain were though improved. Also, comparison between heat-treated and nano-silver-impregnated heat-treated specimens showed that there was a decrease in MOR and MOE in nano-silver-impregnated heat-treated specimens. This shows that nano-silver impregnation facilitates transfer of heat in wood and it may increase the process of degradation and pyrolysis of wood structures in deeper parts of specimens.