Flame retarding PC/ABS resins having superior thermomechanical properties

Triphenyl phosphate (TPP) is well known to be one of the most effective flame retardants for acrylonitrile-butadiene-styrene copolymer (ABS) and its blending resins, such as polycarbonate (PC)/ABS, among various phosphorous-based compounds. However, TPP can also play a role as a plasticizer, which decreases the mechanical properties of PC/ABS resins at high temperature. Furthermore considerable amount of TPP has to be evaporated during molding process due on its much lower evaporation temperature. To overcome these shortcomings, we tried to immobilize TPP by grafting on butadiene moiety of ABS. FT-IR analysis of prepared TPP-grafted ABS (ABS-g-TPP) comparing with TPP, ABS and their blend confirmed that chemical reactions happened between TPP and ABS resins and it was attributed to the graft reaction of TPP onto butadiene moieties. Prepared ABS-g-TPP resins were blended with PC at various compositions to be prepared as testing specimens by injection molding. The physical characteristics such as mechanical properties, thermal stability, and flame retarding properties of the PC/ABS-TPP graft copolymer were analyzed through Vicat softening temperature, IZOD impact strength, transmission electron microscope, and UL94 flame retardation tests. Results showed that PC/ABS-g-TPP resin takes better thermomechanical properties than the existing PC/ABS resins at relatively low additional TPP amounts.     

Preparation and acid dye adsorption behavior of polyurethane/chitosan composite foams

We prepared a series of polyurethane(PU)/chitosan composite foams with different chitosan content of 5∼20 wt% and investigated their adsorption performance of acid dye (Acid Violet 48) in aqueous solutions with various dye concentrations and pH values. It was observed that PU/chitosan composite foams exhibited well-developed open cell structures. Dye adsorption capacities of the composite foams increased with the increment of chitosan content in composite foams, because amine groups of chitosan serve as the binding sites for sulfonic ions of acid dyes in aqueous solutions. In addition, dye adsorption capacities of composite foams were found to increase with decreasing the pH value, which stems from the fact that the enhanced chemisorption between protonated amine groups of chitosan and sulfonic ions of acid dye is available in acidic solutions. The dye adsoption kinetics and equilibrium isotherm of the composite foams were well described with the pseudo-second order kinetic model and Langmuir isotherm model, respectively. The maximum adsorption capacity (q _max) for the PU/chitosan composite foams with 20 wt% chitosan content is evaluated to be ca. 30 mg/g.     

Preparation and characterization of high molecular weight poly(trimethylene terephthalate) by solid-state polymerization

Solid-state polymerization of poly(trimethylene terephthalate)(PTT) was carried out to obtain high molecular weight polymers. Two kinds of commercial PTT chips were polymerized in the solid state by the heat treatment at 190∼220°C for various times and they were characterized by end group content, molecular weight, thermal analysis, and X-ray diffraction. In the solid-state polymerization of PTT, the overall reaction rate was governed by the solid-state polymerization temperature and time, and pellet size. The content of carboxyl end groups decreased during the solid-state polymerization with increasing solid-state polymerization temperature and time. The melting temperature and crystallinity of the PTT were higher for the ones treated at higher temperature and longer time. The activation energy for the solid-state polymerization of PTT was in the range of 24∼25 kcal/mol for both chips. Through the solid-state polymerization of commercial PTT chips, high molecular weight polymers up to an intrinsic viscosity of 1.63 dl/g was obtained, which corresponded to about a 117,000 weight-average molecular weight.     

Preparation and properties of antibacterial Poly(vinyl alcohol) nanofibers by nanoparticles

Poly(vinyl alcohol) (PVA)/Ag-zeolite nanofiber webs were prepared with different concentrations of Ag-zeolite nanoparticles by the electrospinning technique. Scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM), Fourier transform-infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Instron, and antibacterial activities analysis were utilized to characterize the morphology and properties of the PVA/Ag-zeolite nanofiber webs. The study results showed that the polymer concentration, applied voltages and tip-to-collector distances were the main factors influencing the morphology of the electrospun nanofiber webs. The introduction of Ag-zeolite nanoparticles improved the mechanical properties and thermal stability of the PVA nanofiber webs. TEM data demonstrated that the Ag-zeolite nanoparticles were well distributed within the nanofiber. FTIR revealed a possible interaction between the PVA matrix and the Ag-zeolite nanoparticles. These fibers showed an antibacterial efficacy of 99.8 % and over against Staphylococcus aureus and Klebsiella pneumoniae at Ag-zeolite concentrations of 1 % and over, because of the presence of the silver nanoparticles in the zeolite.     

The fabrication and characterization of the photovoltaic cells composed of polydiacetylene and fullerene

Propargyl alcohol was coupled to 2,4-hexadiyne-1,6-diol (HDD) and crystallized in the process of ultraviolet irradiation-induced topochemical polymerization. The HDD polymer crystals were used as one component in the fabrication of organic photovoltaic cells, in combination with fullerene as the electron acceptor. The various structures of the produced photovoltaic cells included bilayer, trilayer, and bulk heterojunction structures. Their photovoltaic properties were analyzed in relation to crystal structure, electrochemical properties, and band structure of the HDD polydiacetylene polymers.     

Multifunctionality of paddy fields in Taiwan

Paddy rice is the staple food in Taiwan, where rice farming always plays an important role in agricultural activities. The paddy fields and irrigation activities hold diversified functions, such as production, eco-environmental and living-associated functions. This paper is to provide information regarding the potential magnitude and monetary value of seven functions of paddy fields in Taiwan, including flood mitigation, fostering water resources, preventing soil erosion, purifying water, cooling air temperature, refreshing atmosphere and recreation. For quantification of the above values, replacement cost method (RCM), contingent valuation method (CVM), and the travel cost method (TCM) are adopted. In addition, the ratio of monetary value and their rice production commodity value (R) was also estimated. The results indicated that the flood mitigation function had a monetary value of US$ 389 million each year, and the ratio to the rice production value R was estimated at 37%. Water resource fostering function was US$ 501 million and R at 47%; soil erosion reduction function was US$ 433 million and R at 41%; water quality purification function was US$ 3 million and R at 0.3%; cooling air temperature function was US$ 961 million and R at 91%; refreshing air function was US$ 196 million and R at 19%, health and recreation function was US$ 987 million and R at 93%, respectively. Due to the significant importance of these externalities, it is recommended that the government should properly take into account the multifunctionalities in policy making to ensure sustainable development of agriculture.     

Preparation of Epoxy Shape Memory Polymers for Deployable Space Structures Using Flexible Diamines

In order to develop epoxy shape memory polymers (ESMPs) with high switching temperature and excellent toughness for deployable space structures, the crosslink density and chain flexibility of candidate ESMP samples were tunned by adding two flexible poly(oxypropylene) diamines, Jeffamine D-230 (D230) and Jeffamine D-400 (D400), as a secondary curing agent. The desired switching temperature of ESMPs for deployable space structures was set within the range of 120-135°C. By adding D230 and D400, the switching temperature of the ESMPs could be adjusted to within this range by increasing their crosslink density, and their impact strength could be significantly increased due to the stress relaxation properties of the diamines’ flexible molecular chains. The modulus and tensile strength of the ESMPs increased, but elongation at break decreased, in proportion to the diamine content. The ESMPs with a suitable switching temperature for deployable space structures had a high elongation at break greater than 22 % and good shape recovery and shape fixity ratios. The larger the value of shape recovery ratio, the faster the shape recovery speed.     

Assessing the acceptance of the system of rice intensification among farmers in rainfed lowland rice region of Cambodia

We conducted interview survey with rainfed rice farmers at a commune in southern Cambodia to identify the determinants of their adoption or rejection of the system of rice intensification (SRI) for the wet season of 2014. SRI was first introduced to the commune in 2003 and spread among the farmers, but the number of farmers discontinuing the practice has increased since 2011. We classified the farmers into four categories: those who practice SRI in all their fields (OA), farmers who practice SRI in some of their fields (PA), farmers who had practiced SRI but discontinued it (DA), and farmers who have never practiced SRI (CR). Farmers in different categories of SRI adoption differed in their access to water sources. The majority of OA and PA farmers had supplementary water sources, which was, however, available to less than 50% of DA farmers and only 15% of CR farmers. Both PA and DA farmers mentioned water shortage as the reason for not practicing SRI in some (PA) or any (DA) of their fields, but they differed in the number of rice fields. All the PA farmers had more than one field, whereas a majority of DA farmers had only one field. Labor shortage and difficulty of planting in a regular grid pattern were also mentioned as the reason for not practicing SRI by the farmers, particularly by DA farmers. Water constraint and difficulties in transplanting were thus identified as two major determinants of SRI adoption/rejection at the study site.     

Colorimetric detection of transition metal ions with azopyridine-based probing molecule in aqueous solution and in PMMA film

We report on an azopyridine derivative for probing transition metal ions and fabrication of its films. The probe, AP, showed a sensitive absorption change toward transition metal ions, especially cobalt ion, even at the concentration of ppm range, accompanied by yellow-to-red color transition with noticeable isosbestic point. In addition, the AP-containing PMMA film with high transparency can be fabricated by spin-casting without any aggregation of AP. The film with PMMA matrix shows good sensitivity toward cobalt ion similar to the case in the solution with a feature of metallochromic transition.     

Changes of the lipid catabolism in potato tubers from cultivars differing in susceptibility to autolysis during the storage

Summary The activities of lipolytic acyl-hydrolases (LAH) and lipoxygenases (LOX) were compared in stored tubers of potato cultivars resistant (Acresta, Eba, Pentland Envoy) and susceptible (Kastor, Pana, Tasso) to post-wounding autolysis. In most cultivars, LAH activities had reached a maximum by the end of December but in cv. Kastor activity continued to increase throughout the storage period. LOX activities increased during most of the storage period except in cv. Tasso. The level of the fatty acid hydroperoxides, assumed from determinations of the malonaldehyde level, also increased during storage. This work was supported by Project CPBP 05.02.2.10 financed by the Polish Academy of Science.