Content changes of several endogenous plant hormones in female-sterile <Emphasis Type="Italic">Pinus tabulaeformis</Emphasis> Carr

To determine the relationship between female sterility of Pinus tabulaeformis Carr. and plant hormones, content changes of several endogenous plant hormones in a female-sterile clone and a normal clone were analyzed during the key period of female gametophyte abortion in mutant clones. The change of ABA content showed a similar pattern between normal and mutant clones, but the ABA content of the mutant clone was always much higher than that of the normal clone. In the normal clone, the IAA content decreased significantly at the early stage of the period and reached its minimum during the first ten days of April and stabilized thereafter. The endogenous ZR levels increased sharply at the early stages and reached a maximum in the middle of April, then decreased dramatically. The IAA and ZR contents of the mutant clone did not change perceptively through the entire period. We conclude that the high levels of ABA and the deficit of IAA and ZR may be the reasons of female gametophyte abortion in the female-sterile clones of P. tabulaeformis.     

Design of wood/montmorillonite (MMT) intercalation nanocomposite

Studying new wood composites through nano science and technology (NSC) will develop new compounding theory of wood, and accelerate the combination of new technology, wood science, material science and other disciplines. The compounding of wood and inorganic MMT on nanoscale molecular level has high potential to greatly improve the mechanical properties, fire retardance, abrasion resistance, decay resistance, dimensional stability and other properties of wood. Based on the great achievements of polymer/montmorillonite (MMT) nanocomposites, this paper reviewed nano intercalation compounding methods (i.e. in-situ intercalative polymerization and direct polymer intercalation), and discussed the structure, properties and modification of montmorillonite (MMT). According to the main chemical components and particular structure of wood, the authors discussed the liquefaction and plasticization of wood, compared the dissolvability and meltability between wood and polymer, and then systematically put forward the basic idea, technological processes and schematic diagram to prepare wood/MMT nanocomposites (WMNC). The key technology to prepare WMNC is either to introduce delaminated MMT nanolayers into wood with the help of some intermediate polymers, or to obtain liquefied wood or plasticized wood from the complicated natural composite. It is applicable and effective to realize wood/MMT nanoscale compounding with the help of proper intercalation agent and medium polymer through the proposed “one-step” or “two-step” impregnating processes.     

健康黑松幼苗中的电波传递

以健康黑松(Pinus thunbergii)幼苗为材料,用非伤害性刺激,如冷冻和伤害性刺激,如：烧伤、刺伤、化学伤害等引发了植物体内的波形的变化,研究表明,非伤害性刺激能在幼苗体内引起动作电波的传递,伤害性刺激除了能引起动作电波的传递外,还能引起较为复杂的变异电波的传递并对这种现象进行了讨论。图4参28。     

Allometric model of the height–diameter curve for even-aged pure stands of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

We derived an allometric model of the height–diameter curve for even-aged pure stands, which was a modification of the earlier model proposed by Inoue (2000a). An individual-dependent allometric equation was used as the height–diameter curve. Using the discriminant analysis method, all trees composed of a stand were stratified into upper and lower trees. It was assumed that both relationships between mean tree height H _m and upper tree height H _u and between mean DBH D _m and mean DBH of upper trees D _u could be described by the time-dependent allometric power equations. The height–diameter curve showed an average relationship between tree height and DBH of a given stand at a given time, and hence it could be assumed that the height–diameter curve contained two points (D _m , H _m ) and (D _u , H _u ). With these assumptions, we derived an allometirc model of height–diameter curve, which allowed the coefficients of the curve to be estimated from mean tree height and mean DBH. The proposed model was fitted to Japanese cedar (Cryptomeria japonica D. Don) data. The error ratio of the allometric model ranged from 2.254% to 13.412% (mean = 6.785%), which was significantly smaller than that of the earlier model. When the error of mean tree height was ±1.0 m or less, the effect of the error of mean tree height on the error ratio was comparatively small. This suggested that the error of ±1.0 m in mean tree height could be accepted in the estimation of height–diameter curve using the allometric model. These features enable us to combine the allometric model with Hirata’s vertical angle-count sampling or growth models. In conclusion, the allometric model would be one of the most practical and convenient approaches for estimating the height–diameter relationship of even-aged pure stands.     

Stereochemistry of matairesinol formation by <Emphasis Type="Italic">Daphne</Emphasis> secoisolariciresinol dehydrogenase

Secoisolariciresinol dehydrogenase activity was detected for the first time from Daphne odora and Daphne genkwa (Thymelaeaceae), which are known to produce optically pure (+)-matairesinol. In sharp contrast, (–)-matairesinol was formed selectively over the (+)-antipode by the secoisolariciresinol dehydrogenase preparation from both D. odora callus and D. genkwa shoots.     

基于分形维木材表面粗糙度的研究

应用分形维对木材表面粗糙度特征进行研究。首先，对Sarkar和Chaudhuri提出的分形维计算方法做了改进：其次，以60个树种为研究对象，提取和分析木材表面的分形维数。得出结论：分形维数能够反映木材表面的粗糙程度，可作为木材表面粗糙度的一种度量？     

Crystallinity of wood and the size of cellulose crystallites in Norway spruce (<Emphasis Type="Italic">Picea abies</Emphasis>)

X-ray diffraction was used to study variations in the crystallinity of wood and the average thickness and length of the crystallites of cellulose as a function of the number of the year ring in Norway spruce [Picea abies (L.) Karst.]. The crystallinity increased from ring 4 to ring 10 from the pith and was constant after ring 10. The crystallinity of mature wood was about 30% ± 5%. The average thickness and average length of the crystallites were 3.2 ± 0.1nm and 28 ± 2nm, respectively; and no systematic variation of these values with the number of the year ring was observed. The mean microfibril angle decreased near the pith but was constant in the mature wood.     

Effect of board density on bending properties and dimensional stabilities of MDF-reinforced corrugated particleboard

We investigated the bending properties of composite boards produced by reinforcing both sides of corrugated particleboard with medium-density fiberboard (MDF). Thickness swelling and linear expansion (LE) were measured to assess the dimensional stabilities of the composite board. Although the apparent density of the composite board was 0.48g/cm³, its strength was found to be equivalent to that of 18-type particleboard as described in JIS A 5908. The boards parallel/perpendicular anisotropy in strength was 0.9. The modulus of rupture (MOR) of the composite board increased with board density only up to a certain density, beyond which the MOR was constant. On the other hand, the thickness swelling of both corrugated particleboard and the composite board was smaller than that of flat-type particleboard, satisfying the JIS A 5908 standard of 12%. Linear expansion (soaking in water of ordinary temperature for 24h) of corrugated particleboard was 0.7%–0.9% in the parallel direction and 2.1%–3.1% in the perpendicular direction; hence, anisotropy in linear expansion existed in the corrugated particleboard. The linear expansion of the composite board was 0.6%–0.9% in the parallel direction and 1.8%–2.5% in the perpendicular direction. Although the LE of the composite board was lower than that of corrugated particleboard, it is necessary to improve the LE of composite board for practical use.     

Inoculation of ectomycorrhizal fungi contributes to the survival of tree seedlings in a copper mine tailing

To advance our understanding of the effects of inoculation with ectomycorrhizal fungi (EMF) on seedling colonization in mine wastelands, we conducted a field experiment in a copper tailing. Six-month-old seedlings of Japanese red pine (Pinus densiflora) and oak (Quercus variabilis) separately inoculated with three EMF species (Pisolithus sp., Cenococcum geophilum, Laccaria laccata) were transplanted to the copper tailing. The survival rates of tree seedlings were monitored monthly, and growth (biomass and height), contents of nutrients and heavy metals (K, P, Ca, Mg, Cu, Zn), and mycorrhizal infection rates of seedlings were determined 6 months after planting. Oak seedlings exhibited higher survival rates than pine seedlings after 6 months of growth on the tailing. EMF inoculations of pine seedlings significantly enhanced their survival, growth, and nutrient uptake. In contrast, EMF inoculations of oak seedlings improved growth only in terms of biomass. Additionally, EMF inoculation caused pine seedlings to accumulate more Cu and Zn in roots compared to non-inoculated seedlings, whereas inoculation inhibited the accumulation of heavy metals in shoots. However, similar results were not observed in oak seedlings. Observations of roots indicated that the rates of mycorrhizal infection of both tree species had dramatically declined at harvest time. In conclusion, ectomycorrhizal symbioses can improve the survival and performance of pine seedlings in mine tailings. The present study provided direct evidence of the importance of EMF inoculation of seedlings to the reforestation of mine wastelands.     

Liquefaction and product identification of main chemical compositions of wood in phenol

To clarify liquefaction ratios and their construction variations of the main chemical compositions of wood in phenol using phosphoric acid as a catalyst, the chemical ingredients of wood such as holocellulose, cellulose and lignin, were measured and extracted according to GB methods. With Fourier transform infrared （FTIR）, the product identification of reactant before and after liquefaction in phenol was investigated. The molecular weights and their distributions of the liquefaction results （acetone soluble parts） were studied by gel permeation chromatography （GPC）. Results show that the molecular weights and their distributions of poplar and Chinese fir are almost the same. In poplar, the distribution of cellulose is the largest, and that ofholocellulose the smallest after liquefaction. For Chinese fir, the distribution of holocellulose is the largest, and that of cellulose the smallest. After liquefaction of poplar cellulose, the change bands of FTIR spectrum observed below 1 600 cm^-1, can be attributed to new substitute groups. The same is true for poplar lignin. For Chinese fir, the spectra of liquefaction results of all chemical compositions differ from that of wood meal. This reveals the more activity groups were produced because of the reactions between Chinese fir and phenol. The research shows that the liquefaction ratios of poplar decrease in the following order： holocellulose 〉 lignin 〉 cellulose, and those of Chinese fir in the order： lignin 〉 cellulose 〉 holocellulose.