气候变化对中国水稻生产的影响研究进展

水稻生产系统是响应气候变化最敏感的农业生态系统之一,本文综述了当前和未来气候变化对我国水稻生产的影响。气候变化背景下,我国水稻生长季的热量资源增多,辐射资源减少,降水不均一性加大。高温热害、干旱、暴雨和洪涝灾害发生更频繁,这可能降低水、热资源的有效性。气候变化使我国单季稻和双季稻潜在种植边界显著北移,导致单季稻、早稻和晚稻的主要生育期缩短。基于统计模型和水稻生长模型的研究结果表明,如果不考虑品种改良和栽培技术的进步,气候变化使单季稻、早稻和晚稻产量下降,但不同稻作区和方法间存在差异。我国水稻生产重心北移、实测生育期延长和产量增加的变化趋势,反映了水稻生产系统通过种植分布调整、品种改良和技术改进来适应气候变化的能力。未来气候变化将进一步导致水稻生育期缩短和产量下降,对我国水稻生产和粮食安全带来严峻挑战。仍需加强气候变化影响机制的研究及其在影响评估中的应用,减小影响评估的不确定性并增加其系统性,为制定有效的应对策略提供可靠的理论支持。     

水稻温敏型叶片白化转绿突变体tsa2的表型鉴定与基因定位

水稻温敏型叶色突变体是研究植物光合作用、叶绿体结构和功能以及温度影响叶绿体发育的理想材料。利用甲基磺酸乙酯(EMS)诱变籼型水稻(OryzasativaL.)三系保持系西农1B,从其后代中筛选到一个突变性状稳定遗传的温敏型叶片白化转绿突变体tsa2 (temperature-sensitive green-revertible albino 2)。与野生型相比, tsa2突变表型受温度影响, 22°C条件下萌发的野生型幼苗表型正常,而tsa2幼苗完全白化,且约40%白化苗死亡,存活白化苗的光合色素含量、光合速率均显著降低,成熟期主要农艺性状均显著变劣;在28°C下萌发的tsa2幼苗叶片呈浅绿色并伴有白条纹,其光合色素含量显著降低,光合速率及主要农艺性状差异较小; 32°C下萌发的tsa2幼苗叶片无明显差异。透射电镜观察显示,与野生型相比,tsa2在22°C下叶肉细胞中无叶绿体或存在异常发育叶绿体(尚未分化出基粒和基层),在28°C下部分叶肉细胞含少量发育完整的叶绿体,在32°C下叶肉细胞数量及形态均正常。实时荧光定量PCR(qRT-PCR)分析表明,与野生型相比,tsa2突变体中部分光合色素代谢途径基因、叶绿体发育相关基因及光合作用相关基因的表达水平呈不同程度变化。遗传分析表明, tsa2突变表型受一对隐性核基因控制, TSA2被定位于第5染色体SSR标记S5-57和S5-119之间,物理距离为718 kb。本研究为水稻遗传改良及研究温度影响叶绿体发育机制奠定了基础。     

辽河流域玉米籽粒脱水特点及适宜收获期分析

辽河流域处于中国东北春玉米区南部,积温资源相对丰富,在该区域推广玉米机械粒收技术具有较好的热量资源基础,但区域内玉米收获时籽粒含水率偏高,机械粒收的破碎率、损失率偏高等质量问题突出。分析区域内主推品种的籽粒脱水特征、基于热量资源条件确定机械粒收的适宜时间,是解决上述问题的合理途径。2017年选择该区域主推的29个不同熟期玉米品种,在开鲁县和铁岭县开展了籽粒脱水动态观测试验。结合流域内常年春玉米播种日期、不同品种生长发育及籽粒脱水积温需求、历史气象数据等分析结果,建立不同品种在辽河流域适宜机械粒收时期的预测方法。结果显示, Logistic Power模型可以很好地模拟春玉米籽粒含水率变化过程。不同品种籽粒实收含水率与模拟含水率间存在极显著的线性关系,决定系数R2为0.916 (n=45),均方根误差RMSE为1.217。研究建立的不同品种籽粒含水率模型具有极佳的区域适用性,以2017年国审的4个宜机收品种及流域内2个主栽品种研究,明确了不同品种适宜机械粒收时期的分布规律。国审品种中,德育919和京农科728自播种至籽粒含水率降至25%活动积温需求低于3200°C d,在辽河流域大部地区可于9月中下旬达到高质量机械粒收的籽粒含水率要求。泽玉8911和吉单66积温需求低于3400°C d,可于10月上中旬在流域内实现机械粒收,较上述德育919和京农科728晚10～20d。而当地主栽的辽单575和京科968脱水至适宜籽粒含水率的积温需求较泽玉8911和吉单66多200°Cd,无法在当地常规收获期实现高质量的机械粒收。本研究检验了基于LogisticPower模型的籽粒含水率预测模型在区域分析应用中的精度。通过比较国审宜机收品种与当地主栽品种的籽粒含水率变化、成熟和脱水的积温需求以及适宜机械粒收日期的空间分布规律,更新现有品种有助于在辽河流域实现常规收获期内的高质量机械粒收。     

茶树油粕中茶皂素的提取及其对果蔬采后致病菌的抑制作用

以从茶树油粕中提取茶皂素的得率为评价指标,研究提取溶剂、方法、时间、温度和料液比等因素对茶皂素得率的影响,并通过正交试验确定茶皂素最佳提取工艺条件,同时考察了所得茶皂素对几种果蔬采后致病菌的抑制作用。结果表明,茶树油粕中提取茶皂素的最佳工艺条件为:以75%乙醇作为提取溶剂,料液比1∶14(g/mL),85℃热回流提取2.5 h,茶皂素的得率达13.3%,经AB-8大孔吸附树脂纯化后,纯度达95.64%。所获茶皂素对胶胞炭疽菌(Colletotrichum gloeosporioides)、灰葡萄孢霉(Botrytis cinerea)和链格孢菌(Alternaria alternata)菌丝的生长均有显著的抑制作用,半最大效应浓度(EC50)值分别为203.62、165.87和550.61mg·L^-1,其中以对B. cinerea的抑制作用最强。     

Parametric Study and Design of the Ultimate Strength of Tube gusset Plate Connections

The tube gusset plate connections are widely used in electric transmission towers. However, there is little technical information regarding the behavior of tube gusset plate connections. Thus, a analytical parametric study was conducted to investigate the behavior of tube gusset plate connections. The analytical results were compared with the existing experimental results. It was found that the finite element analysis results were in good agreement with the experimental results. In the parametric study, the effects of geometry, chord load and stiffener on the ultimate strength were considered. Based on the analytical results, a design method for predicting the ultimate strength of tube gusset connections was proposed, and its applicability was verified.     

A model of a hall for a workshop of metasynthetic engineering

A hall for a workshop of metasynthetic engineering (HWME) is constructed based on network services, in which the expert, machinery and knowledge systems are combined with services. This hall is an expansion of the traditional workshop hall. The     

Natural convection heat transfer in the air layer of insulating glass

The numerical simulation with FLUENT software is addressed for the natural convection heat transfer under the conditions of different air layer thickness with 6 mm,9 mm,12 mm,14 mm and 16 mm. The heat transfer rate is compared with that by heat conduction. Gas types, Rayleigh number (Ra),the relative thickness of air layer,δ/H,and the surface (ΔT) are main factors for natural convection heat transfer. The natural convection heat transfer could be approximately regarded as the pure heat conduction in the conditions of above air layer thickness. The heat transfer coefficient of the insulating glass with simulation is approximate to that with empirical calculation.     

Decision Making for Vendor Selection With AHP and Random Disposal of DEA

The vendor selection directly relatives to the procurement quality and influences the competition of the corporation in the supply chains. It is important and practical to study the vendor selection method. The measuring criteria and the method for vendor selection are analyzed. The authors put forward an new method which is combined with both the advantage of analytic hierarchy process (AHP ) and random disposal of data envelopment analysis ( DEA) for vendor selection. It introduces a random variable which solves the disadvantage of the weigh value in DEA which convert subjective estimation to objective opinion in the course of the vendor selecting. The method can improve the reliability of the vendor selection.     

MAP包装结合1-MCP处理对脆李硬度和可溶性固形物含量的影响

脆李果实采后分别经PE、PVC薄膜包装,在0℃冷藏一段时间后置于25℃环境下进行货架贮藏,在贮藏期、货架期分别或复合进行1-MCP处理脆李果实,研究不同材料包装对脆李果实硬度和可溶性固形物含量的影响。结果表明,不同薄膜包装均具有良好的气调效果,其中PVC比PE包装能更有效地提高CO_2和降低O_2百分含量,延缓货架期果实硬度下降,保持较高的可溶性固形物含量;货架期1-MCP处理可以维持最高的脆李硬度和较高的可溶性固形物含量。