论农学研究的发展

较为详细地论述了中国传统农学和西方近代农学的哲学基础、方法论及它们各自的不足。中国传统农学思想的阐释借鉴了中国古代哲学的概念和范畴，以朴素的系统、整体观察为特征。西方近代农学则以还原论为基础，以实验、分析方法为特征。系统科学是20世纪兴起的联系社会科学与自然科学的一门横断性学科，是探索整体、演化及其复杂性的科学。现代农学研究应引入系统科学的哲理观和方法论，对于融合中国传统农学与西方近代农学、发展现代农学有重要意义。     

Experimental Study on the Extended Length of Negative Reinforcement Cut-in Phases in Continuous Beams

In this paper through the static loading tests of 6 inflexion zones and 2 cantilever zones in full-size constrained R/C beams, the stress performance in rebars cut-in-phases and subjected to negative moment is studied. The stress properties of extended length of rebars with different shear-span ratiosare analysed on basis of the full measurement of strain distributions combined with the investigation on state and regularity of the diagonal cracks development and series of new knowledge are obtained. It is found that current Concrete Design Code provisions on the extended length are inadequate for the high shear-span ratio and superfluous for the low shear-span ratio. The theoretical and experimental foundations are provided for determining proper value of extended length for rebars cut-in-phases.     

OPTIMIZATION OF BIPARTITE JOINS WITH GRAPH THGORY

An optimization approach for multi-relational joins based on the matching concept in graph theory is introduced. The basic idea lies in constructing a join graph from an expression of N-relation query, and seeking for a maximun matching with minimun total weight. The algorithm for bipartition(X, Y) is proposed in this paper.     

The Feasible Control for the Day-operation of the Three-Gorge Cascade Hydropower Station

The feasible control problem is presented for the day-operation of the Three-Gorge Caseade Hydropower Station. The significance of the problem is explained. Basic propetties ofthe problem and the approaches to study it are discussed. Two methfods are given for solving theproblem. which are calculus of variation and linear programming. In the former. the Euler equationwith time-lag and the generalised two-point boundary conditions are obtained and the correspondingpractical implication is interpreted. In the latter. the rationality for the discrete model is exptainedand the computalional details are given for the implement software. some questions which should bepaid much attentfon and the corresponding propeels are prasented based on the numerical results andtheoretical analysis     

New Method to Study In-situ Stress of Rock Mass by AE and Structure Analysis of Rock Mass

In this paper, the authors adopt a method of structural analysis and stereography in combination with acoustic emission Kaiser Effect test in laboratory to find out the main direction of initial stresses. For overcoming the shortcomings of Kaiser effect by comparing it with traditional methods of measuring in-situ stresses, it is shown that this method is simpler, more economical and convenient for a large number of measurements and for studying the law of changes of regional in-situ stresses.     

X射线灭活活体日本沼虾精子的初步研究

为检测X射线对日本沼虾精子的灭活效果,利用X射线对雄性日本沼虾进行不同时间的照射处理,将处理后的雄虾与刚完成生殖脱壳的雌虾交配。待雌虾产卵后,计数雌虾抱卵天数,并在显微镜下观察卵的畸形情况。X射线管照射强度为100 k V,5 m A,源距10 cm,照射时间为0、30、60、90、120 min。结果发现:照射30 min组的抱卵天数及卵的畸形率较0 min组无变化,卵的畸形率为0,卵能正常发育至孵化出膜。随着照射时间的增加,在30~90 min之间,雌虾抱卵天数逐渐减少,且所抱卵的畸形率呈上升趋势。照射120 min组的抱卵天数较90 min组变化不大,卵的畸形率达100%。在本试验照射时间范围(0~120 min)内,灭活日本沼虾精子遗传物质的最佳照射时间为90~120 min。     

喷油泵试验台智能量油系统的研究

为解决喷油泵试验台量油系统测量误差较大的问题，本研究通过采集喷油器针阀升程、喷油压力、转速等信号精确测得喷油量。     

胞外多聚物在污泥颗粒化过程中的作用研究

本文研究了胞外多聚物(ECP)在污泥颗粒化过程中的作用。试验采用小试UASB反应器,以人工葡萄糖配水作为进料。测定结果表明,在颗粒污泥培养过程中,随着颗粒污泥的形成、生长和成熟,污泥ECP含量逐渐下降,从开始的6.36减小到30mg/gVSS。当反应器酸化、污泥性能变差或运行不稳定时,ECP含量则表现为急剧上升,达70mg/gVSS。这些结果说明污泥颗粒化过程中ECP所起的作用不大。对有关ECP的影响及作用机理,以及污泥颗粒化机制,文章进行了分析讨论。     

液压自由活塞发动机的节能方式研究

液压自由活塞发动机是将内燃机和液压泵集成于一体，实现动力非刚性传输的复合发动机。本文从其内部能量转换及外部能量回收两个方面，详细地分析和阐明了液压自由活塞发动机各种节能方式和实现途径，以液压挖掘机为例，强调液压自由活塞发动机作为中心液压站，结合二次调节及液压变压器技术，简单方便地实现群控节能。