Efficacy of spinosad and methoprene,applied alone or in combination,against six stored-product insect species

Efficacy of the insecticides spinosad and methoprene, applied alone or in combination to wheat, was evaluated against six stored-product insect species, Rhyzopertha dominica, Sitophilus oryzae, S. granarius, Cryptolestes ferrugineus, Oryzaephilus surinamensis, and Liposcelis bostrychophila. The concentrations of the insecticides were 0.1 and 0.5 ppm for spinosad and 1 and 5 ppm for methoprene. Parental mortality of R. dominica was 100% on wheat treated with either rate of spinosad, with no progeny production in any combination treatment. Parental mortality of S. oryzae did not exceed 62%, and progeny production was not reduced by any insecticide treatment. All S. granarius adults exposed on wheat treated with spinosad alone at 0.5 ppm were killed, but parental mortality was reduced when methoprene was added. Progeny production was reduced in treatments containing spinosad. Mortality of adult C. ferrugineus was 97% or greater in treatments containing spinosad, but adult mortality of O. surinamensis and L. bostrychophila was not reduced by insecticide treatments. The specific combinations of spinosad and methoprene evaluated in our study would have no benefit over spinosad used alone for control of any of the six species tested.     

Relating genetic variation of ecologically important tree traits to associated organisms in full-sib aspen families

Knowledge on phenological, morphometric, and phytochemical variation of local progenies of European aspen (Populus tremula, L.) is limited. The goal of this study was to characterize variation in growth and ecologically important leaf properties in aspen full-sib families in relation to interacting organisms (mycorrhiza, endophytes, and insects) and to determine whether these interactions were affected by soil application of a systemic fungicide. In local progenies, within-family variation of neutral molecular genetic markers (nuclear microsatellites) was higher than between families. Significant variation in growth, production of phenolic defensive compounds and other phytochemical leaf traits was found between families. Phenolic compounds showed clear negative correlation with generalist herbivores, but did not result in negative trade-off with biomass production. Differences in mycorrhizal colonization were not found among full-sib families and application of a systemic fungicide suppressed neither mycorrhizal colonization nor infestation with insects. However, a strong suppression of endophytes occurred, whose long-term consequences may require attention when fungicides are used in agroforestry plantations.     

Larval performances and life cycle completion of the Siberian moth, <Emphasis Type="Italic">Dendrolimus sibiricus</Emphasis> (Lepidoptera: Lasiocampidae), on potential host plants in Europe: a laboratory study on potted trees

The Siberian moth, Dendrolimus sibiricus, Tschtv. is the most harmful defoliator of coniferous forests in North Asia. The pest has already spread over the Urals and continues moving westwards. Recently, it has been recommended for quarantine in member countries by European and Mediterranean Plant Protection Organization (EPPO). The performances of the pest on coniferous species planted in Europe were assessed on a range of potted trees corresponding to the spectrum of economically important conifers in the EU: European larch Larix decidua, Norway spruce Picea abies, Scots pine Pinus sylvestris, European black pine Pinus nigra, and the North American species: Douglas fir Pseudotsuga menziesii and grand fir Abies grandis. Larvae showed a potential to survive and complete the development on all these host tree species. Favorable hosts were grand fir, European larch, and Douglas fir that allowed higher survival, better larval development, and as a result, yielded heavier pupae and adult moths with higher longevity. Black pine was a poor host but, however, could still support larval and pupal development. Norway spruce and Scots pine had an intermediate behavior. If accidentally introduced to Europe, the Siberian moth may become especially damaging in forest stands predominated by European larch and by the North American firs. Norway spruce and especially the two-needle pines will be less prone to intensive defoliation by this species. The fact that the pest may damage the range of economically important coniferous species should be taken into account in the pest risk assessment for Europe and also for North America where the Siberian moth occurrence is considered likely.     

A landscape and policy perspective on forest conversion: Long-tailed tit (<Emphasis Type="Italic">Aegithalos caudatus</Emphasis>) and the allocation of deciduous forests in southern Sweden

As resources allocated specifically for conservation are limited, there is a need to ensure conservation policy initiatives lead to effective conservation outcomes. In this study, we investigated the potential conservation benefits from alternative spatial allocations of old deciduous stands to a landscape dominated by coniferous production forests owned primarily by non-industrial private forest owners. As a target species, we used the long-tailed tit (Aegithalos caudatus), a species associated with deciduous forests and known to be sensitive to isolation. We used a previously published model based on empirical data on the occurrence of this species, to assess the probability of occurrence of the bird in a 4,000 km² area in southern Sweden for which we possess detailed spatial GIS data (kNN data) of tree species composition and age. We assessed alternative scenarios where old deciduous forest was allocated with or without respect to distance from existing old deciduous forests. Due to the long-tailed tit’s habitat requirement increasing the amount of old deciduous forests close to existing habitats was the most effective strategy. However, the potential advantages of this strategy may in fact be overturned in favor of the other scenarios if ownership structures and probable uptake rates of policy initiatives are also considered. If a policy initiative is targeted toward owners with properties in close proximity to existing suitable habitat, when compared to if all forest owners are targeted, a higher proportion of owners is needed to participate in order to achieve the same degree of habitat creation for the species. Here, we discuss the potential benefits for effective conservation policy formulation from integrating spatially explicit datasets and detailed ecological knowledge with land-ownership structures and policy uptake scenarios.     

Logistic regression models for human-caused wildfire risk estimation: analysing the effect of the spatial accuracy in fire occurrence data

About 90% of the wildland fires occurred in Southern Europe are caused by human activities. In spite of these figures, the human factor hardly ever appears in the definition of operational fire risk systems due to the difficulty of characterising it. This paper describes two spatially explicit models that predict the probability of fire occurrence due to human causes for their integration into a comprehensive fire risk–mapping methodology. A logistic regression technique at 1 × 1 km grid resolution has been used to obtain these models in the region of Madrid, a highly populated area in the centre of Spain. Socio-economic data were used as predictive variables to spatially represent anthropogenic factors related to fire risk. Historical fire occurrence from 2000 to 2005 was used as the response variable. In order to analyse the effects of the spatial accuracy of the response variable on the model performance (significant variables and classification accuracy), two different models were defined. In the first model, fire ignition points (x, y coordinates) were used as response variable. This model was compared with another one (Kernel model) where the response variable was the density of ignition points and was obtained through a kernel density interpolation technique from fire ignition points randomly located within a 10 × 10 km grid, which is the standard spatial reference unit established by the Spanish Ministry of Environment, Rural and Marine Affairs to report fire location in the national official statistics. Validation of both models was accomplished using an independent set of fire ignition points (years 2006–2007). For the validation, we used the area under the curve (AUC) obtained by a receiver-operating system. The first model performs slightly better with a value of AUC of 0.70 as opposed to 0.67 for the Kernel model. Wildland–urban interface was selected by both models with high relative importance.     

Work quality and veneer value recovery of mechanised and manual log-making in Italian poplar plantations

In Italy, poplar plantations represent an important source of wood products, and especially of high-quality veneer logs. These plantations offer favourable conditions to the introduction of forest mechanisation, and especially easy access and industrial management. However, owners fear that mechanised log-making may cause value losses, due to poor length measurement, log surface damage and improper grading. This study compared the performance of manual and mechanised log-making on ten commercial operations, in order to determine the occurrence and the severity of possible value losses due to product degrade. The study found that length measurement errors are smaller for mechanised processing, while the frequency and severity of log surface damage are the same for both treatments. In three cases out of five, mechanised log-making extracted the same value from the stems as manual log-making: in the remaining two, differences were very small and went opposite directions. Significant differences were found between operators, stressing the importance of operator skills and motivation. In fact, the log-making specifications and the pricing structure applied to poplar processing are relatively simple and are unlikely to challenge the ability of personnel and equipment. At present, most Italian poplar growers are unaware of the potential offered by modern technology, whose intelligent use would boost value recovery and decrease harvesting cost. Significant benefits may derive from the introduction of optimised bucking, which may help shifting to a more articulated and rewarding product strategy.     

Modelling and mapping the suitability of European forest formations at 1-km resolution

Proactive forest conservation planning requires spatially accurate information about the potential distribution of tree species. The most cost-efficient way to obtain this information is habitat suitability modelling i.e. predicting the potential distribution of biota as a function of environmental factors. Here, we used the bootstrap-aggregating machine-learning ensemble classifier Random Forest (RF) to derive a 1-km resolution European forest formation suitability map. The statistical model use as inputs more than 6,000 field data forest inventory plots and a large set of environmental variables. The field data plots were classified into different forest formations using the forest category classification scheme of the European Environmental Agency. The ten most dominant forest categories excluding plantations were chosen for the analysis. Model results have an overall accuracy of 76%. Between categories scores were unbalanced and Mesophitic deciduous forests were found to be the least correctly classified forest category. The model’s variable ranking scores are used to discuss relationship between forest category/environmental factors and to gain insight into the model’s limits and strengths for map applicability. The European forest suitability map is now available for further applications in forest conservation and climate change issues.     

Breeding performance of the second generation in some bivoltine populations of <Emphasis Type="Italic">Ips typographus</Emphasis> (Coleoptera Curculionidae) in the south-eastern Alps

The spruce bark beetle, Ips typographus, is one of the most extensively studied European forest pests. Gaps exist in the knowledge about second generation breeding performance in bivoltine populations. In this study, the breeding performance of the second generation was evaluated in three bivoltine populations of I. typographus in the SE Alps. Length of the maternal galleries (from 40.5 to 44.8 mm), population growth rate (PGR; from 0.7 to 3.6), and emerged adults per m² (from 669 to 1,570 insects/m²) varied among populations and were negatively correlated with bark colonisation density. Pheromone traps set up in the three investigated forests differed in the number of trapped beetles, with mean captures ranging between 5,310 and 19,850 insects per trap. The populations giving the highest captures in the traps showed the lowest bark colonisation density (248 vs. 489 maternal galleries per m²) and the best breeding performance. The populations of parasitoids and predators corresponded to just 1–9 and 2–10% of the emerging I. typographus adults, respectively, and phloem temperature never reached thresholds lethal to I. typographus. Interspecific competition was negligible, whereas intraspecific competition was found to be the main factor affecting the breeding performance of the second generation, although with different intensity according to the colonisation density. It is hypothesised that competition with the first generation and spring precipitation influence the number of suitable hosts available to the second generation.     

Soil variability through spatial scales in a permanently disturbed natural spruce-fir-beech forest

Soil variability was assessed in a 74.2-ha area within the Žofínsky prales natural forest. Parameters evaluated for 1765 soil profiles inside 353 graticule plots were as follows: (1) thickness of organic horizons, (2) thickness and form of mineral horizons, (3) humus form (HF), (4) soil taxonomic unit (STU) and (5) anomalies. In addition, soil reaction (pH_KCl) and oxidizable carbon content (C_ox) were measured in the laboratory for 734 samples from the upper mineral (A) and lower mineral (B) horizons. The most frequently occurring humus form was mor followed by moder, hydromor and peaty T-horizon. Entic Podzols, Dystric Cambisols, Haplic Cambisols, Albic Podzols, Histic (or Haplic) Gleysols, Endogleyic Stagnosols, Fibric or Hemic or Sapric Histosols and Stagnic Gleysols were all present at the site despite its homogeneous geological bedrock. Overall coefficient of variance (CV) was lower in terrestrial soils compared with (semi-)hydromorphic soils. Overall variance decreased in both soil groups with increasing depth, as did CV differences between the fine (up to 10 m) and the locality scales. The lowest CV values occurred for C_ox and pH_KCl. The CV values differed between STUs as well. Compared to lower horizons, variograms of upper horizons showed greater autocorrelation at the intermediate spatial scale (10–320 m)—ranging from 50 to 150 m. Semivariance values, however, reached 70–80% of sill already at a distance of 10 m. The most significant factor of variability at all studied spatial scales is presumably the soil disturbance regime, followed by terrain micro-topography and the effect of tree species.     

Do mature pine plantations resemble deciduous natural forests regarding understory plant diversity and canopy structure in historically modified landscapes?

We compared the structure of the arboreal layer and the diversity and species composition of the understory vegetation of three types of mature forest communities: oak (Quercus pyrenaica) and beech (Fagus sylvatica) forests and Scots pine (Pinus sylvestris) plantations. Our main aim was to determine whether differences in these variables existed and were due to the identity of the dominant tree species. We selected four stands or replicates per forest type located geographically close and with relatively similar conditions. We found no differences in the arboreal structure of oak and beech forests, which were characterised by great variability in tree size, while in case of plantations, this variability was lower at both the intra-stand (estimated by the coefficient of variation) and inter-stand (i.e. the four replicates harboured trees of similar sizes) scales. However, the highest variability in the canopy layer of natural forests was not consistently linked to greater understory species richness. Indeed, the lowest plant species richness was found in beech forests, while oak forests harboured the highest value at either the sampling unit (per m²) or stand scales. The greatest negative correlation between plant diversity and the environmental variables measured was found for litter depth, which was the highest in beech forests. The results obtained by the CCA indicated that the four replicates of each forest type clustered together, due to the presence of characteristic species. We concluded that pine plantations did not approach the environmental conditions of native forests, as plantations were characterised by singular understory species composition and low arboreal layer variability, compared to natural woodlands.