Identification of urolithin a as a metabolite produced by human colon microflora from ellagic acid and related compounds

Dietary ellagic acid and related polyphenols are metabolized in humans to dibenzopyran-6-one derivatives, and the microbial origin of these metabolites has been suggested. However, this has not been demonstrated so far. Fecal samples donated by six volunteers were incubated under anaerobic conditions, and aliquots were used to evaluate the fecal metabolism of ellagic acid, the ellagitannin punicalagin, and an ellagitannin rich extract from walnuts. The isoflavone daidzein was also incubated with the same fecal samples to follow the production of the microbial metabolites previously reported (dihydrogenistein, O-demethylangolensin, and equol) as a positive control of the system and to evaluate similarities between isoflavone and ellagic acid fecal flora metabolism. After fermentation the metabolite "urolithin A" (3,8-dihydroxy-6H-dibenzo[b,d]pyran-6-one) was produced from ellagic acid, punicalagin, and the ellagitannin extract in all the fecal cultures from different volunteers, but with very different production rates and concentrations. This large variability in the concentration of metabolite and kinetics of metabolite production is consistent with the large variability found in the excretion of these metabolites in urine in vivo after human consumption of ellagitannins, and with differences in the composition of the fecal microflora. No correlation between isoflavone and ellagic acid metabolism by fecal microflora was observed. The present study confirms the microbial origin of the recently reported in vivo generated hydroxy-6H-dibenzo[b,d]pyran-6-one derivatives in humans and is a further step in the study of the bioavailability and metabolism of ellagic acid and ellagitannins.     

Adsorption of pesticides from water by functionalized organobentonites

Replacement of natural inorganic cations of clay minerals with organic cations has been proposed as a strategy to improve the adsorptive capacity of clay minerals for organic compounds, including pesticides. The organic cations most commonly used for this purpose have been quaternary ammonium ions containing alkyl or aryl chains without specific functional groups. In this work, we evaluated the ability of two bentonites (SWy-2 and SAz-1) exchanged with four natural organic cations containing diverse functional groups (L-carnitine, L-cysteine ethyl ester, L-cystine dimethyl ester, and thiamine) as adsorbents of pesticides varying in their chemical structures (simazine, hexazinone, triadimefon, alachlor, carbaryl, and imazethapyr). For comparison purposes, the adsorptive properties of two "classical" organobentonites, hexadecyltrimethylammonium- and phenyltrimethylammonium-exchanged bentonites, were also determined. Most organobentonites displayed higher affinity for the pesticides than the untreated bentonites, but the improvement in adsorption capacity varied depending on the characteristics of the pesticide and the interlayer organic cation. Triadimefon, carbaryl, and imazethapyr displayed the highest affinity for carnitine (K(f) = 229-2377)-, thiamine (K(f) = 83-354)-, and cystine (K(f) = 96-100)-treated bentonites, respectively, whereas alachlor was adsorbed similarly by all organobentonites. In general, pesticide adsorption-desorption hysteresis was greater for adsorbents with the highest adsorption capacities. The results demonstrate that selective modification of smectitic clay minerals with natural organic cations containing appropriate functional groups can be a useful strategy to improve their performance for the removal of specific pesticides from the environment.     

Extending applicability of the oxygen radical absorbance capacity (ORAC-fluorescein) assay

The ORAC-fluorescein (ORAC-FL) method recently validated using automatic liquid handling systems has now been adapted to manual handling and using a conventional fluorescence microplate reader. As calculated for Trolox, the precision of the method was <3.0, expressed as percent coefficient of variation. The accuracy of the method was <2.3, expressed as percent variation of the mean. The detection and quantification limits were those corresponding to 0.5- and 1-microM Trolox standard solutions, respectively. The method has been applied to 10 pure compounds (benzoic and cinnamic acids and aldehydes, flavonoids, and butylated hydroxyanisole), to 30 white, rose, and bottled- and oak-aged red wines, and to 7 commercial dietary antioxidant supplements. All samples exhibited a good linear response with concentration. As seen by other methodologies, the chemical structure of a compound determines its antioxidant activity (ORAC-FL value). Of particular interest were the results with oak-aged red wines from different vintages (1989-2002) that confirm influence of vintage, but not origin of the oak, in the antioxidant activity of wines from the same variety. Dietary antioxidant supplements presented a great variability (170-fold difference) in their antioxidant potency. This work proves applicability of the ORAC-FL assay in evaluating the antioxidant activity of diverse food samples.     

Determination of beta-lactams in milk using a surface plasmon resonance-based biosensor

Two surface plasmon resonance (SPR)-based biosensor assays for detection of beta-lactam antibiotics in milk are reported. The assays are based on the enzymatic activity of a carboxypeptidase converting a 3-peptide into a 2-peptide, a reaction that is inhibited in the presence of beta-lactams. Antibodies were used to measure either the amount of formed enzymatic product or the amount of remaining enzymatic substrate. Both assays detected different beta-lactams at or below European maximum residue limits (MRLs), and the detection limit for penicillin G was 1.2 microg/kg and 1.5 microg/kg for the 2- and 3-peptide assays, respectively. The precision (CV) was < 5%, both within and between assays at the penicillin G MRL (4 microg/kg). The biosensor results obtained upon analysis of incurred milk samples were compared with results obtained by liquid chromatography (HPLC), and the method agreements were, in general, good.     

Countercurrent supercritical fluid extraction and fractionation of high-added-value compounds from a hexane extract of olive leaves

Countercurrent supercritical fluid extraction (CC-SFE) at a pilot scale plant was used for fractionation of high-added-value products from a raw extract of olive leaves in hexane. Compounds found in the raw extract were waxes, hydrocarbons, squalene, beta-carotene, triglycerides, alpha-tocopherol, beta-sitosterol, and alcohols. The CC-SFE extraction process was investigated according to a 2(3) full factorial experimental design using the following variables and ranges: extraction pressure, 75-200 bar; extraction temperature, 35-50 degrees C; and ethanol as modifier, 0-10%. Data were analyzed in terms of extraction yield, enrichment, recovery, and selectivity. Higher extraction yields were attained at 200 bar. For most of the compounds analyzed enrichment was attained at the same conditions, that is, 75 bar, 35 degrees C, and 10% ethanol. Hydrocarbons were usually recovered in the separators, whereas waxes and alpha-tocopherol remain in the raffinate. Selectivity data reveal that alpha-tocopherol is the most easily separable compound. The influence of the experimental factors on the recovery of all the compounds was studied by means of regression models. The best fitted model was attained for beta-sitosterol, with R2 = 99.25%.     

Organophosphorus pesticide residues in Mexican commercial pasteurized milk

A study was conducted to measure residues of 13 organophosphorus (OP) pesticides, widely used as dairy cattle ectoparasiticides or in crops used for animal feed, in homogenized and pasteurized Mexican milk samples. Four different milk brands with high distribution were collected biweekly during a 12 month period (n = 96) in supermarkets. OP pesticide residues were measured by gas chromatography with a flame photometric detector. Approximately 39.6% of the samples contained detectable levels of OP pesticide residues. Eight samples contained residues exceeding established maximum residue limits (MRL), and the OP pesticides present in these samples were dichlorvos (five samples), phorate, chlorpyrifos, and chlorfenvinphos (one sample, respectively). Average residues of 13 OP pesticides measured were below established MRLs ranging between 0.0051 and 0.0203 ppm.     

Complexation of several fungicides with beta-cyclodextrin: determination of the association constants and isolation of the solid complexes

The formation of inclusion complexes with beta-cyclodextrin was studied for several popular fungicides of different types: prochloraz, 2-phenylphenol, thiophanate methyl, 8-hydroxyquinoline, and benalaxyl. Phase solubility diagrams showed that in all cases complexation takes place, leading to an important increase of water solubility in prochloraz and benalaxyl. Equilibrium association constants could be determined from the phase solubility data and from NMR titrations in the case of 2-phenylphenol. Because of the low solubility of the complex formed between 8-hydroxyquinoline and beta-cyclodextrin, the corresponding association constant could not be determined. The solid complexes of fungicide-cyclodextrin were prepared and isolated by different methods. The isolation of real complexes and not physical mixtures was confirmed in the cases of prochloraz, 2-phenylphenol, and benalaxyl by differential scanning calorimetry.     

Conformational states of sunflower (Helianthus annuus) Helianthinin: effect of heat and pH

The structure and solubility of helianthinin, the most abundant protein of sunflower seeds, was investigated as a function of pH and temperature. Dissociation of the 11S form (hexamer) into the 7S form (trimer) gradually increased with increasing pH from 5.8 to 9.0. High ionic strength (I = 250 mM) stabilizes the 11S form at pH > 7.0. Heating and low pH resulted in dissociation into the monomeric constituents (2-3S). Next, the 7S and 11S forms of helianthinin were isolated and shown to differ in their secondary and tertiary structure, and to have denaturation temperatures (T(d)) of 65 and 90 degrees C, respectively. Furthermore, the existence of two populations of the monomeric form of helianthinin with denaturation temperatures of 65 and 90 degrees C was described. This leads to the hypothesis that helianthinin can adopt two different conformational states: one with T(d) = 65 degrees C and a second with T(d) = 90 degrees C.     

In vivo antifungal activity of the essential oil of Bupleurum gibraltarium against Plasmopara halstedii in sunflower

The antifungal activity of the essential oil of the aerial parts of Bupleurum gibraltarium was evaluated against Plasmopara halstedii. Fungus spores were inoculated in sunflower seedlings, previously treated with several essential oil solutions, and the sporulation percentage was measured after an 11-day treatment. The oil at a concentration of 5.0 mL/L clearly inhibited the fungus sporulation. The contact between fungus sporangia and essential oil was minimized, so it seems that the oil pretreatment could activate the defense response of the sunflower seedlings against the pathogen invasion. The main compounds in the oil were sabinene (31.1%), alpha-pinene (15.6%), and 2,3,4-trimethylbenzaldehyde (10.9%), among a total of 65 components identified.     

Aroma extract dilution analysis. Precision and optimal experimental design

The odor thresholds of 12 different compounds have been determined in an AEDA experiment using a panel composed of 8 individuals. Only in one case is the distribution of thresholds among judges significantly different from the log-normal. The cause of that departure from normality seems to be a cross adaptation rather than anosmia. The standard deviations (SD) range from 2(0.7) to 2(4.1), with 2(1.8) as average. If the AEDA is carried out at a dilution rate, R, and dilution R(P) (where P = 0, 1, 2.) is the last one at which a compound was detected by a judge, the flavor dilution (FD) factor that should be provided for that judge is R(P+0.5). In the case where several judges carry out the AEDA, the FD for a given compound should be the geometric mean of the FD provided by all the judges. The SD of the distribution of FDs is related to that of the distribution of odor thresholds, but is strongly influenced by the dilution rate, R, being higher with higher R values. The relationship between both SDs can be used to determine the expected precision (measured as the geometric length of the 95% confidence interval) of the result of an AEDA experiment as a function of the dilution rate, the number of judges, and the SD of the distribution of thresholds. Different simulations have shown that in most cases, a dilution rate of 10 is the best option, and that lower dilution rates are advantageous only if the analyzed solution contains compounds with a very narrow distribution of thresholds.