Expression of chicken LEAP-2 in the reproductive organs and embryos and in response to <Emphasis Type="Italic">Salmonella enterica</Emphasis> infection

In recent years host antimicrobial peptides and proteins have been recognised as key mediators of the innate immune response in many vertebrate species, providing the first line of defense against potential pathogens. In chickens a number of cationic antimicrobial peptides have been recently identified. However, although these peptides have been studied extensively in the avian gastrointestinal tract, little is known about their function in the chicken reproductive organs and embryos. Chicken Liver Expressed Antimicrobial Peptide-2 (cLEAP-2) has been previously reported to function in protecting birds against microbial attack. The aim of this study was to investigate the expression of cLEAP-2 gene in the chicken reproductive organs, as well as in chicken embryos during embryonic development, and to determine whether cLEAP-2 expression in the chicken reproductive organs was constitutive or induced as a response to Salmonella enteritidis infection. RNA was extracted from ovary, oviduct, testis and epididymis of sexually mature healthy and Salmonella infected birds, as well as from chicken embryos until day ten of embryonic development. Expression analysis data revealed that cLEAP-2 was expressed in the chicken ovary, testis and epididymis as well as in embryos during early embryonic development. Quantitative real-time PCR analysis revealed that cLEAP-2 expression was constitutive in the chicken epididymis, but was significantly up regulated in the chicken gonads, following Salmonella infection. In addition, expression of cLEAP-2 during chicken embryogenesis appeared to be developmentally regulated. These data provide evidence to suggest a key role of cLEAP-2 in the protection of the chicken reproductive organs and the developing embryos from Salmonella colonization.     

Comparative efficacy of standard AGID and precipitinogen inhibition test with monoclonal antibodies based competitive ELISA for the serology of <Emphasis Type="Italic">Peste des Petits Ruminants</Emphasis> in sheep and goats

This project was conducted to investigate the comparative efficiency of competitive ELISA (cELISA), standard Agar Gel Immunodiffusion Test (AGID) and Precipitinogen Inhibition Test (PIT) for the diagnosis of Peste des Petits Ruminants (PPR) in Pakistan. To deal with this, serum samples from 198 sheep and 82 goats were collected from three different government livestock farms and all the samples were run simultaneously with the three serological tests. The samples found positive for PPR antibodies through cELISA, AGID and PIT were 96 (34.2%), 60 (21.4%) and 72 (25.7%), respectively. Kappa statistics were applied to evaluate the concordance between the laboratory-based test (cELISA) and field-based tests (AGID and PIT). Kappa statistics scores for cELISA versus AGID and PIT were 0.6343 (95% Confidence Interval CI 0.5231–0.7456) and 0.7134 (95% Confidence Interval CI 0.5987–0.8281), respectively, which indicate a “substantial” agreement between cELISA and AGID and “significant” agreement between cELISA and PIT. AGID and PIT revealed relative diagnostic sensitivities with cELISA of 59.3% and 69.7% and relative diagnostic specificities of 98.3% and 97.2%, respectively. The data suggested that for mass screening and control of PPR, these serological tests proved practical in the absence of cELISA since they have high relative diagnostic specificities and a satisfactory relative diagnostic sensitivities.     

Electroneutral cornstarch by quaternization and sulfosuccinylation to improve the adhesion of cold starch paste to raw cotton for low-temperature sizing

The objective of this research was to survey the effects of starch quaternization and sulfosuccinylation on the adhesion of cold starch paste to raw cotton fibers for cotton warp sizing at low temperature. Acid-thinned cornstarch (ATS) was quaternized and then sulfosuccinylated to introduce 3-(trimethylammonium chloride)-2-hydroxypropyl and sulfosuccinate substituents onto its backbones. The electroneutrality of starch samples prepared was achieved by maintaining a constant mole ratio (5.3:1) of the two substituents. A series of electroneutral cornstarch (ECS) samples with different levels of the substituents were derived by altering the feed ratio of the modifying reagents to starch for determining desirable level of starch modification. Adverse influences of cotton wax and starch retrogradation on the adhesion of cold starch paste to raw cotton fibers were evaluated to illustrate the effectiveness of starch quaternization and sulfosuccinylation. It was found that the modification was able to alleviate the adverse influence of starch retrogradation and ameliorate the adhesion to the fibers at low temperature. Higher level of the modification led to less retrogradation and resulted in strong adhesion. Furthermore, the adverse influence of cotton wax on the adhesion could be eliminated after a pre-wetting treatment of raw cotton warps with hot water. The adhesion of ECS paste to raw cotton at 60 °C was statically the same as that of ATS at 95 °C when total DS of ECS was 0.0443 or higher.     

Photochromic fabrics with improved durability and photochromic performance

Previously, we have reported a method for producing photochromic wool fabric by applying a thin layer of hybrid silica-photochromic dye onto the wool surface. While the photochromic coating showed a very fast optical response and had little influence on the fabric handle, its durability was poor. In this study, the durability of the photochromic coating layer was improved by introducing epoxy groups into the silica matrix via co-hydrolysis and co-condensation of an alkyl trialkoxysilane compound (ATAS) and 3-glycidoxypropyltrimethoxysilane (GPTMS). The presence of epoxy groups in the silica enhanced both washing and abrasion durability or fastness. In addition, the optical response speed was slightly increased as well. Effects of the type of alkyl silane and the GPTMS/alkyl silane ratio on the coating durability, fabric handle and optical response were examined.     

Field variability and vulnerability index to identify regional precision agriculture opportunity

Innovations in precision agriculture (PA) have created opportunities to achieve a greater understanding of within-field variability. However, PA adoption has been hindered by uncertainty about field-specific performance and return on investment. Uncertainty could be better addressed by using innovative analyses that provide insights into variability among fields and across a region. The objectives of this research were to: (1) generate a within-field soil clay-content variability index (VI_c), (2) create a regional-scale growing-season precipitation variability index (VI_p), and (3) integrate the soil and weather indices with the USDA NRCS soil erosion vulnerability index (SVI) to produce a final index that incorporated both variability and vulnerability (VVI). The interpretation of the outcomes represented by each objective supports unique decisions that land managers may consider for reducing uncertainty about implementing PA. All indices were derived using publically available information for Missouri, USA. The VI_c was the ratio between the maximum and minimum clay content within fields. The VI_p was calculated as the standard deviation of the total growing-season precipitation from 2006 to 2015. Significant clustering of VI_c and VI_p were observed along the Missouri River corridor, northeast and northwest Missouri. Fields with high VVI were mostly in the claypan soil region of northeast Missouri, and along a portion of the Missouri River dominated by loess soils on steep slopes. Southeast Missouri displayed the greatest diversity in soil and weather variability, but had low vulnerability. This research could be used as a decision-support tool to aid producers and PA service and product providers in determining where PA opportunities exist.     

Isolation of Nanocellulose from Water Hyacinth Fiber (WHF) Produced via Digester-Sonication and Its Characterization

The successful isolation and characterization of water hyacinth fiber (Eichornia crassipes) (WHF) nanocellulose is presented in this study. The novelty was in exploring a wider range of properties of highly purified samples of WHF after each stage of production in more depth. The isolation was accomplished by pulping in a digester and sonication. Morphological changes before and after treatment were demonstrated by scanning electron microscopy (SEM). The lignin and hemicellulose content decreased during chemical treatment. Transmission electron microscopy (TEM) and particle size analyzer (PSA) were used to determine the morphology of WHF after sonication for 1 h. TEM shows that the diameter and length of nanocellulose WHF were 15.61 and 147.4 nm, respectively. The crystallinity index and crystalline domain area significantly increased after chemical treatment. The highest crystallinity index was 84.87 % after an acid hydrolysis process. The increase in crystallinity leads to good thermal stability. Moisture absorption tests of WHF were carried out before and after treatment. The lowest moisture absorption was in the cellulose fiber after sonication (nanocellulose).     

Effects of ionic surfactants on the aggregate stability and water repellency of silt loam soil

Purpose

With the increase of surfactant usages, more and more concerns were paid on their effects on the physicochemical characteristics of soils. Up to now, only few researches have examined the effects of ionic surfactants on the stability of soil structure and soil water repellency.

Materials and methods

Cetyltrimethyl ammonium bromide (CTAB) as cationic surfactant and sodium dodecyl sulfate (SDS) as anionic surfactant were adopted to investigate their effects on the aggregate stability and water repellency of a silt loam soil which was sampled in Corn High-Tech Park, Huang-Huai-Hai region, China. (1) Aggregate stability: 50 g soil was mixture with 100 mL surfactant solution in a beaker. The concentrations of surfactant solutions were 0 (the blank), 200, 400, 600, 800, 1000, and 2000 mg L^?1, respectively. After 30 min, the soil was sieved and divided into four fraction aggregates. (2) Soil water repellency: the concentrations of surfactant solutions were the same as experiment 1. Forty grams of soil was blended with 80 mL surfactant solution in an aluminum specimen. Drying the water by oven of 40 °C firstly and then by air, the whole period was about 1 week. After that, soil water infiltration and sorptivity were measured.

Results and discussion

Compared to the blank, surfactants increased the amounts of 2–0.25 and <0.053 mm aggregates of the soil and decreased the amounts of 0.25–0.053 mm aggregates of the soil. Surfactants also increased the mean weight diameter (MWD) of the soil. Except the 200 mg L^?1 treatment, CTAB promoted the soil water infiltration. All SDS treatments impeded the soil water infiltration. The soil repellency factor (R) value of the blank was 1.22, lower than the critical value of 1.95, which implied that the soil of blank treatment was free of soil water repellency. For CTAB, only 200 and 400 mg L^?1 treatment’s R were higher than 1.95 while for SDS, all the treatment’s R were higher than 1.95.

Conclusions

Surfactants improved the stability of soil aggregates. Soil treated with CTAB did not show the repellency, whereas SDS treatment resulted in intense water repellency compared with the wettable blank soil. Findings of this study can be used to explain the role of ionic surfactants on soil structure stability as well as on the development of water repellency in lower soil depths.

     

Effect of nitrogen levels on photosynthetic parameters,morphological and chemical characters of saplings and trees in a temperate forest

Exploring the response differences of leaf physiology parameters to enhanced nitrogen deposition between saplings and trees is vital for predicting the variations of terrestrial ecosystem structure and function under future global climate change. In this study, the ecophysiological parameters of saplings and trees of Fraxinus mandshurica Rupr. were measured at different levels of nitrogen addition in a temperate forest. The results show that ecophysiological parameters maximum net photosynthetic rate(P_(max)), apparent quantum efficiency(a), dark respiration(R_d), light saturation point(L_(sp)), photosynthetic nitrogen use efficiency(PNUE),specific leaf area(SLA)and stomatal conductance under saturated light intensity(G_(smax)) were higher in saplings than in trees. These physiological parameters and not N_(leaf)(leaf nitrogen content)led to relatively lower P_(max) and R_d in trees. For both saplings and trees, low and median nitrogen addition(23 and 46 kg ha~(-1)a~(-1)) resulted in significant increases in Pmax, Rd, Lsp, Chl, PNUE, SLA and Gsmax. These parameters tended to decline under high additions of nitrogen(69 kg ha~(-1)a~(-1)),whereas Nleaf was always enhanced with increasing nitrogen. Variations in Pmax and Rd with increasing nitrogen were attributed to variations in the strongly related parameters of, Lsp, Chl, PNUE, SLA and Gsmax. Overall, the response sensitivity of physiological parameters to enhanced nitrogen levels was lower in trees compared with saplings.     

Sprouting characteristics of a subtropical evergreen broad-leaved forest following clear-cutting in Okinawa,Japan

This study explores the sprouting characteristics of an evergreen broad-leaved forest after clear-cutting based on a survey of 1,893 stumps of 62 tree species in Okinawa, Japan. The sprouting capabilities of the stumps varied among tree species. The stumps of 60 species could produce sprouts, while those of the other two species could not. In 10 of the sprouting species, the mean sprout-stem number was higher than 4.0 stems per stump; nine sprouting species showed low sprouting capabilities. Additionally, Castanopsis sieboldii and Schima wallichii, the dominant species, exhibited high sprouting capabilities. Further, the sprouting capabilities varied with stump diameter at breast height (DBH). Stumps with a larger DBH tended to have a higher mean number of sprout stems per stump, higher DBH, and higher tree height than the smaller stumps. The forest stands regenerated by sprouting might recover into a tree community similar to that before clear-cutting.