采用不同指标评价牧地载畜力的比较研究

选用代谢能、消化能、总热能、干物质、粗蛋白和可消化粗蛋白质等6项指标,进行全国不同类型、不同区域的天然牧地和人工牧地载畜力的比较评价,结果表明,采用代谢能或者消化能作指标较为适宜,通常不宜采用总热能、干物质、粗蛋白或可消化粗蛋白质作指标,特别是当牧地饲用植物的蛋白质含量较高(如各种人工牧地和高寒类天然牧地)或较低(如草丛类和南方区的天然牧地)之时.     

红三叶遗传图谱构建及抗白粉病基因QTL定位

本研究以感(岷山红三叶)、抗(澳大利亚红三叶品种♀Sensation×Renegade♂杂交新品系“甘农PR1”)白粉病红三叶材料为父母本杂交并种植成苗经人工接菌后筛选出抗、感白粉病的F₁群体为作图群体,利用AFLP标记构建红三叶高密度遗传图谱,并利用区间作图法对抗白粉病QTL进行了定位分析,可以为红三叶抗白粉病基因克隆和转基因等分子辅助育种奠定基础。结果表明,149个AFLP标记构建得到的遗传图谱包含7个连锁群(LG1,LG2,LG3,LG4,LG5,LG6和LG7),遗传图谱的总距离为640.5 cM。其中,LG1连锁群的遗传距离(140.6 cM)和标记间平均距离(9.4 cM)均最大;LG4连锁群的遗传距离(55.2 cM)和标记间平均距离(1.8 cM)最小。应用区间作图法对红三叶抗白粉病基因进行QTL分析定位,共检测到5个抗白粉病相关QTL位点(qrp-1,qrp-2,qrp-3,qrp-4和qrp-5),其中qrp-1、qrp-2、qrp-3和qrp-4位于LG4连锁群上,qrp-5位于LG5连锁群上。5个QTL位点对抗白粉病的贡献率为29%~90%,qrp-1对红三叶白粉病抗性的贡献率最大(90%),为主效QTL。     

小黑麦与黑麦花序结构和籽粒特性比较

植物的花序结构及其形态特征是影响种子生产性能的重要因素。对于禾本科植物而言,其花序大小、小穗数、小花数及小花的外稃、内稃和芒的性状特征直接影响种子形成和产量。本研究通过测定小黑麦品系C2、C35和黑麦品系C13、C33的花序结构特征,得到以下结果:小黑麦花序[(14.30±0.52) cm×(1.24±0.09) cm]明显大于黑麦[(13.20±0.35) cm×(0.82±0.02) cm],小黑麦花序长而粗,黑麦花序短而细;小黑麦花序的小穗数[(21.35±1.47)个]少于黑麦[(30.20±0.79)个];小黑麦每个小穗的小花数较多,为3~4朵,黑麦的小花数趋于稳定,每个小穗有2朵小花。从花序中部小穗的小花结构看,小黑麦下位护颖长[(1.27±0.11) cm]和宽[(0.26±0.03) cm]、上位护颖长[(1.30±0.09) cm]和宽[(0.23±0.04) cm]均显著大于黑麦下位护颖长[(1.04±0.05) cm]和宽[(0.08±0.01) cm]、上位护颖长[(0.94±0.10) cm]和宽[(0.06±0.01) cm];小黑麦中部小穗第1小花的外稃宽[(0.32±0.03) cm]、外稃高[(0.24±0.03) cm]和芒长[(8.35±0.51) cm]、第2小花的外稃宽[(0.35±0.04) cm]、外稃高[(0.25±0.05) cm]和芒长[(8.37±1.19) cm]极显著大于黑麦相应值[(0.26±0.01),(0.15±0.01),(5.50±0.19),(0.25±0.01),(0.17±0.01)和(5.18±0.23) cm];第1和第2小花的外稃长[(1.35±0.06),(1.37±0.06) cm]和内稃长[(0.84±0.04),(1.41±0.06) cm]均小于黑麦的外稃长[(1.49±0.05),(1.47±0.05) cm]和内稃长[(1.45±0.05),(1.47±0.04) cm]。小黑麦的穗粒数[(52.50±1.80)粒]显著低于黑麦[(58.50±2.50)粒] (P<0.05),但其穗粒重[(2.08±0.04) g]、粒重[(0.04±0.00) g]和籽粒宽[(3.04±0.32) mm]均极显著高于黑麦 (P<0.01),每个花序的籽粒不仅体积大,而且质量较重,其籽粒的生产性能高于黑麦。小黑麦籽粒呈椭圆形或长卵圆形,浅黄色,表皮皱缩,饱满度差;黑麦籽粒呈窄纺锤形,青灰色,表皮光滑,籽粒饱满。小黑麦和黑麦花序结构与籽粒性状的Pearson相关分析表明,小黑麦花序宽和花序基部小穗数与籽粒长显著正相关(P<0.05),花序长与籽粒宽极显著正相关(P<0.01),花序中部小穗的下、上位护颖宽分别与穗粒重和穗粒数极显著正相关(P<0.01);黑麦花序中部小穗第2小花的内稃长与籽粒长显著正相关(P<0.05),外稃高与穗粒数极显著负相关(P<0.01)。研究小黑麦和黑麦的花序结构和籽粒特征,对正确区分二者和了解其籽粒的生产性能具有重要意义,同时有利于小黑麦的示范推广。     

开食料中不同NDF水平对犊牛生长性能、瘤胃内环境及血清生化指标的影响

为探索开食料中不同NDF水平对犊牛生长、瘤胃发酵参数以及血清生化指标的影响,选用初生重相近(42±2.5) kg、饲喂足量初乳的中国荷斯坦犊牛60头,其中公犊牛36头,母犊牛24头。随机分为A、B、C和D 4个处理组,每个处理15头,其中9头公犊牛+6头母犊牛,试验犊牛于犊牛岛(1.5 m×3.4 m)单独饲养。15日龄开始分别饲喂NDF水平不同的4种开食料,分别为:A处理10%,B处理15%,C处理20%和D处理25%,70日龄断奶,试验期112 d。结果表明:1)0~42日龄和70~112日龄,B组日增重均高于A、C和D组(P<0.05),分别高出45.69、39.79、117.13 g·d^-1和35.33、153.29、 145.93 g·d^-1。70~112日龄,B、C和D组开食料采食量显著高于A组(P<0.05),分别高出255.20、252.48和392.27 g·d^-1。A(0.61)和B(0.60)组犊牛的饲料转化率显著高于C(0.55)和D(0.54)组(P<0.05);2)犊牛瘤胃pH在35和70日龄时,C组显著高于其他3组(P<0.05),112日龄时,A和B组显著高于C和D组(P<0.05);3)瘤胃NH₃-N含量在90日龄前差异不显著(P>0.05),但在112日龄时, B、C和D组较A组显著降低16.72%、44.19%和52.10%(P<0.05);4)C和D组乙酸比例显著高于A和B组(P<0.05);B组丙酸比例较A、C和D组高出4.24%、3.18%和6.43% (P<0.05),乙酸/丙酸显著低于A、C和D组(P<0.05);5)各处理组间血清总蛋白、葡萄糖和尿素氮含量无显著差异(P>0.05)。1~3月龄犊牛开食料中NDF适宜水平为15%有利于提高断奶后日增重,促进饲料利用效率,改善瘤胃内环境,且对犊牛血清生化指标无不利影响。     

Multimarker and rare variants genomewide association studies for bone weight in Simmental cattle

Bone weight, defined as the total weight of the bones in all the forequarter and hindquarter joints, can reflect somebody conformation traits and skeletal diseases. To gain a better understanding of the genetic determinants of bone weight, we used a composite strategy including multimarker and rare‐marker association to perform genomewide association studies (GWAS) for that character in Simmental cattle. Our strategy consisted of three models: (i) A traditional linear mixed model (LMM) was applied (Q+K‐LMM); (ii) single nucleotide polymorphisms (SNPs) with p‐values less than .05 from the LMM were selected to undergo the least absolute shrinkage and selector operator (Lasso) in the second stage (LMM‐Lasso); (iii) genes containing two or more rare SNPs were examined by performing the sequence kernel association test (gene‐based SKAT). A total of 1,225 cattle were genotyped with an Illumina BovineHD BeadChip containing 770,000 SNPs. After the quality‐control procedures, 1,217 individuals with 608,696 common SNPs and 105,787 rare SNPs (with 0.001 < minor allele frequency [MAF] <0.05) remained in the sample for analysis. A traditional LMM successfully mapped three genes associated with bone weight, while LMM‐Lasso identified nine genes, which included all genes found by traditional LMM. Only a single gene, EPHB3, surpassed the significance threshold after Bonferroni correction in gene‐based SKAT. In conclusion, based on functional annotation and results from previous endeavours, we believe that LCORL, RIMS2, LAP3, PRKAR2B, CHSY1, MAP2K6 and EPHB3 are candidate genes for bone weight. In general, such a comprehensive strategy for GWAS may be useful for researchers seeking to probe the full genetic architecture underlying economic traits in livestock.     

6307E深沟球轴承开裂原因分析

对装配过程中发生开裂的6307E深沟球轴承,采用宏观观察、显微观察、硬度检测、扫描电镜观察、能谱微区成分分析等手段,并结合装配工艺进行了综合分析。分析结果表明,6307E深沟球轴承开裂处显微组织正常、硬度符合技术要求、化学成分正常且无原材料缺陷,裂纹处存在明显的氧化特征,可知该裂纹为轴承装配前就存在的淬火裂纹。     

江苏省森林碳储量的区域分布研究

运用因子连续函数法对江苏省13个地级市的森林碳储量及其变化情况进行了估算。结果表明:2010年,江苏省森林碳储量为4 615.55×104 t,苏北、苏南和苏中的占比分别为57.83%、28.26%和13.91%;2005~2010年,江苏省森林碳储量增加了2 025.59×104 t,森林"碳汇"效应显著,但各区域的碳储量变化不均衡。在江苏新增造林面积空间较为有限的背景下,提高林地生产力,优化树种和林龄结构是增加森林碳储量的有效途径。     

非调质钢在发动机曲轴上的应用研究

介绍了所选用的非调质钢材料在发动机曲轴上的应用研究。各项性能及工艺试验证明,所选用的S38Mn Si V非调质钢的锻造成形性、切削加工性、台架疲劳性能能够满足6110发动机曲轴技术要求,可替代调质钢制造柴油机曲轴。     

Comparative Study on Carcass Traits and Meat Quality of Different Month Old of Xinjiang Brown Cattle Steers

In this research,12 heads of 28 to 30 months (low months age group) and 8 heads of 32 to 34 months (high months age group) Xinjiang Brown cattle steers which fed in the same mode of nutrition were chose for the slaughter test,in which the carcass traits,nutrient composition and some edible quality index were measured and comparative analyzed,a research which through comparative analysis the carcass traits and meat quality of nutritional components of different months of Xinjiang Brown cattle steers was carried out.The results indicated that the marbling,carcass grade,fat,meat color of high months age group were better than that of low months age group,the traits of the low months age group on fat color,moisture,protein,cooking loss and shear force value were better than that of high months age group,and there were significant difference on the traits of fat and meat color L^* between the two groups (P<0.05),while the differences of other traits between them were not significant (P>0.05);As high-grade beef,in addition to the traits of meat color and pH value of the chunk roll,tenderloin and striploin,each site of the meat traits on the fat,protein,moisture,cooking loss,shear force value indicators were all better than other parts,and showed the best of nutritional value and edible quality.28 to 34 months of Xinjiang Brown cattle steers could produce high-grade beef,the meat could be used as the raw materials of steak and boiled beef.     

The mechanical roles of the clasping leaf sheath in cereals: Two case studies from oat and wheat plants

Stem lodging is a common problem in cereal crop production and a main constraint for grain yield improvement. The leaf sheath that surrounds and protects the hollow internodes of stem could provide the plants with a great physical support. However, this biomechanical function has been ignored for several decades in cereal crops. This study aimed to examine the biomechanical properties of basal stem internodes and lodging susceptibility of the whole plants with or without the clasping leaf sheath in wheat (Triticum aestivum L.) and oat (Avena sativa L.) among different genotypes and agronomic practices (including planting densities and nitrogen application rates). The main objective was to quantify the mechanical role of the leaf sheath in oat and wheat crops by a “safety factor” method. On average, the leaf sheath contributed 40%, 68% and 38% of the overall stem bending strength, flexural rigidity and safety factor, in oat, while it accounted for 11%, 24% and 10%, respectively, in wheat plants. The significant contribution of the leaf sheath is due to its vital role in enlarging the peripheral position (i.e., second moment of area) and stiffness (i.e., Young's modulus). The contribution ratios (%) were found to be higher in oat than in wheat plants, due to the greater mass density of leaf sheath and more proficient/prevailing stay-green capability in oat genotypes. This study emphasizes the important mechanical role of clasping leaf sheath on stem internodes of cereals and indicates that the stay-green trait of the leaf sheath can be exploited to design appropriate varieties with improved lodging resistance and great yield potential.