Yield map generation of perennial crops for fresh consumption

Yield mapping technologies can help to increase the quantity and quality of agricultural production. Current systems only focus on the quantification of the harvest, but the quality has equal or greater importance in some perennial crops and impacts directly on the financial profitability. Therefore, a system was developed to quantify and relate the quality obtained in the classification line with the plants of the orchard and for decision-making. The system is comprised of hardware, which obtains the location of the harvester bag during harvesting and unloading at the unloading site, and software that processes the collected data. The cloud of real-time data contributed from the different collectors (bins) allows the construction of yield maps, considering the multi-stage harvesting system. Further, the system enables the creation of a detailed map of the plants and fruits harvested. As the harvest focuses on quality, it takes place in stages, depending on the ripening of the fruits. In addition to the yield maps, the system allows identification of the efficiency of each worker undertaking the harvest by the number of performed discharges and by the time spent. The system was developed in partnership with the Federal Technological University of Paraná and Embrapa Uva & Vinho and was tested in apple orchards in southern Brazil. Although the system was evaluated with only data from apple cultivation, monitoring the quality and quantifying other orchard fruits can positively impact the fruit sector.

     

Effect of the number of intercrosses on grain yield in basic rice synthetic populations

The effect of 0, 1, 2, 3 and 4 intercross cycles using genetic male sterility on the mean yield and genetic variability of the CNA 5 irrigated rice synthetic population was assessed studying 300 S_0:2 (1998/99) and S_0:3 (1999/00) families grown in two locations (Lambari, MG and Goianira, GO). Each intercross was investigated using a 8 × 8 triple lattice design experiment containing 60 families and four control cultivars. Five experiments were carried out per location and generation, totaling 20 experiments. Individual, combined over locations, combined over generations and combined over locations and generations analyses of variance were performed. Linear regression equations were fitted to data of each location and generation as well as, genetic and phenotypic parameters were estimated. An average increase of 3.91% in grain yield was obtained with the increase in the number of intercrosses. However, when genetic gains obtained from selection of the five and ten highest yielding families were considered, negative b estimates were always obtained, suggesting a tendency of gain increase reduction with the increase in the number of intercrosses. This was confirmed by the analysis of the means of the best families, since increases in the number of intercrosses did not result in selection of families with greater mean grain yield. The estimates of the genetic variances and heritabilities did not suggest an increase in genetic variability with the increase in intercross cycles. Therefore, carrying out intercrosses on the base population did not improve the results of the irrigated rice recurrent selection program. This revised version was published online in August 2006 with corrections to the Cover Date.     

Carcass characteristics and meat quality of sheep fed alfalfa hay to replace Bermuda grass hay

Tropical Animal Health and Production - The objective of this study was to evaluate carcass characteristics, meat quality, and organ and viscera weight of forty male sheep, not castrated, initially...     

Transcriptomic profile reveals molecular events associated to focal adhesion and invasion in canine mammary gland tumour cell lines

The prevalence of cancer in animals has increased significantly over the years. Mammary tumours are the most common neoplasia in dogs, in which around 50% are presented in the malignant form. Hence, the development and characterization of in vitro models for the study of canine tumours are important for the improvement of cancer diagnosis and treatment. Thus, the aim of this study was to characterize cell lines derived from canine mammary gland neoplasias which could be further used for basic and applied oncology research. Samples of canine mammary carcinomas were taken for cell culture and 2 cell lines were established and characterized in terms of cell morphology, tumourigenicity and global gene expression. Both cell lines presented spindle‐shape morphology and shown common malignant features as in vitro invasion potential and expression of epithelial and mesenchymal proteins. Also, we found gene expression patterns between the 2 cell cultures in comparison to the normal mammary gland tissue. Cells from M25 culture showed a higher invasion and in vivo tumourigenic potential, associated to the overexpression of genes involved in focal adhesion and extracellular matrix communication, such as FN1, ITGA8 and THBS2. The phenotypic characterization of these cells along with their global gene expression profile potentially determine new therapeutic targets for mammary tumours.     

The Odd Log-Logistic Student <Emphasis Type="Italic">t</Emphasis> Distribution: Theory and Applications

The normal distribution is most used in analysis of experiments. However, it is not suitable to apply in situations where the data have evidence of bimodality or heavier tails than the normal distribution. So, we propose a new four-parameter model called the odd log-logistic Student t distribution as an alternative to the normal and Student t distributions. The new distribution can be symmetric, platykurtic, mesokurtic or leptokurtic and may be unimodal or bimodal. Its various structural properties can be determined from the linear representation of its density function. The estimation of the model parameters is performed by maximum likelihood. The proposed distribution can be used as an alternative for randomized complete block design, thus providing analysis of real data more realistic than other special regression models. We perform a sensitivity analysis to detect influential or outlying observations, and construct generated envelopes from the residuals to select appropriate models. We illustrate the importance of the proposed model by means of three real data sets in analysis of experiments carried out in different regions of Brazil.     

A Rapid,High Throughput Micro Sugar‐Snap Cookie Quality Test Procedure Using Asymmetrical Centrifugal Mixing

A modified AACC 45‐g flour cookie procedure using asymmetrical centrifuge mixing as a replacement for conventional mixing has been developed. Ingredients are added to a pin cup in the same proportion as in the Approved Method 10‐50D (AACC 2000) sugar‐snap cookie test and mixed in a single step for 15 sec at 2,500 rpm. The dough is then processed and the resulting cookies are scored according to the AACC Approved Method 10–52 40‐g flour micro cookie test method. Cookies produced from a control cookie flour and four commercial soft wheat flours with the new mixing method did not show the characteristic surface cracking patterns normally obtained with conventional three‐stage mixing. However, with the exception of one spread value, no significant differences in spread, thickness, or the ratio of spread to thickness were evident when results were compared with those obtained with the AACC Approved Method 10‐50D 225‐g flour test method using a Hobart mixer equipped with a paddle. Cookies produced from two sets of advanced soft white spring wheat breeder lines, including control cultivars, using the asymmetrical centrifuge mixing procedure were also very comparable in spread, thickness, and ratio compared with those produced using 225 g of flour in the AACC Approved Method. Reproducibility of test results for all cookie parameters for both commercial and advanced plant breeder samples were comparable to the AACC Approved Method 10‐50D 225‐g flour test method. The very short mixing time and the ability to quickly clean or use multiple pin cups should allow very high throughput of flour samples relative to the use of conventional mixers for cookie testing.     

Effects of an Enterococcus faecium‐based probiotic on growth performance and health of Pirarucu,Arapaima gigas

Intensive fish farming has resulted in an increased concern for disease outbreaks. Probiotic use is one of the strategies being developed to improve fish health and productivity. Measures of probiotic colonization, growth performance, haematological characteristics and parasite load were used to evaluate the effect of diets supplemented with Enterococcus faecium on growth and health of Arapaima gigas juveniles. A completely randomized design with four treatments (diet with E. faecium at 1 × 10⁶ CFU/g and 1 × 10⁸ CFU/g, control diet and diet with the culture medium MRS) and three replicates was used. Ninety‐six Arapaima juveniles were distributed in 12 cages fed with the specified diet for 68 days. Colonization of the intestinal tract by lactic acid bacteria reduced the total number of heterotrophic bacteria in fish fed with probiotics compared to controls. Fish fed a supplemented diet containing 1 × 10⁸ CFU/g presented higher values of weight gain, survival and fish growth uniformity, and lower values of feed conversion ratio. The prevalence of Trichodina sp. could have affected the survival of fish in the control group. Reduction in parasite load and an increase in haematocrit, the number of erythrocytes, thrombocytes, neutrophils and monocytes were also observed in fish fed the diet containing 1 × 10⁸ CFU/g. Enterococcus faecium presented a probiotic effect in A. gigas juveniles and can be recommended for use at a concentration of 1 × 10⁸ CFU/g to modify the gut microbiota, improve growth performance and haematology and reduce parasitic load.     

Occurrence of Lipophilic Marine Toxins in Shellfish from Galicia (NW of Spain) and Synergies among Them

Lipophilic marine toxins pose a serious threat for consumers and an enormous economic problem for shellfish producers. Synergistic interaction among toxins may play an important role in the toxicity of shellfish and consequently in human intoxications. In order to study the toxic profile of molluscs, sampled during toxic episodes occurring in different locations in Galicia in 2014, shellfish were analyzed by liquid chromatography tandem mass spectrometry (LC–MS/MS), the official method for the detection of lipophilic toxins. The performance of this procedure was demonstrated to be fit for purpose and was validated in house following European guidelines. The vast majority of toxins present in shellfish belonged to the okadaic acid (OA) group and some samples from a particular area contained yessotoxin (YTX). Since these toxins occur very often with other lipophilic toxins, we evaluated the potential interactions among them. A human neuroblastoma cell line was used to study the possible synergies of OA with other lipophilic toxins. Results show that combination of OA with dinophysistoxin 2 (DTX2) or YTX enhances the toxicity triggered by OA, decreasing cell viability and cell proliferation, depending on the toxin concentration and incubation time. The effects of other lipophilic toxins as 13-desmethyl Spirolide C were also evaluated in vitro.     

Structural characterization of stalk lignin from banana plant

Dioxane lignins from two fractions of banana plant ‘Dwarf Cavendish’ stalk (floral stalk (DL_FS) and rachis (DL_R)) were structurally characterized by a set of spectroscopic (Ultraviolet (UV), FTIR, solid- and liquid-state NMR) and chemical degradation (permanganate (PO) and nitrobenzene oxidation (NO)) techniques. Despite both lignins are of HGS-type, strong structural differences were observed between them. Thus, DL_FS showed almost twice the abundance of H and G units and almost half of the abundance of S units when compared to DL_R. DL_R possessed significantly higher amount of β-O-4′ structures (0.32/C₆ against 0.12/C₆) and the molecular weight (5400 Da against 3750 Da) than those of DL_FS. About 72% of the condensed structures in DL_FS are of β-5 and 5–5′ types, whereas 4-O-5′-diaryl ether structures were the most abundant condensed structures in DL_R. Most of H units in both lignins are terminal phenolic coumarates linked to lignin substructures by ester bonds. Both lignins are structurally associated with suberin-like components in cell wall tissues. Structural features of stalk lignin were discussed in terms of possible restrictions for the kraft pulping of integral stem material.